Home > Message Board > Accessories > Cables > Archive through July 23, 2004 > Y - Connector for Subwoofers???? Pl...
Main Topics Main Topics   Your Account Your Account Search Search   Help/Instructions Help
Today's Posts Today's Posts | Last 3 Days Bookmark and Share
Author Thread: Y - Connector for Subwoofers???? Please Help....
Top of pagePrevious messageNext messageBottom of page Link to this message

JJ
Edit Post

I have a JBL PB-10 with connections to my Receiver (Sub Out).

The sub has both L and R input.

Would it be better to use a Y - connector and use both signals or just use 1 channel?

If so or if not, why? Please explain in detail.


Many Many Thanks,
Top of pagePrevious messageNext messageBottom of page Link to this message

Edit Post

i read somewhere that there is a 10 dB increase if a y cable is used to connect both L and R of the sub. That means more bass for the same signal.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ben
Edit Post

Yes, it would be better to use a Y-connector for your sub. That's what I did for my Velodyne HGS-12. Definitely an increase in bass and since mine uses the signal from the subwoofer cable to auto on itself, the Y-connector helped the subwoofer to auto on itself at a lower set volume from my pre-amp. Jansen is correct in his statement about an increase of 10 dBs. I have read articles stating the same with a range of 3-10 dB increase in bass. You can't go wrong adding a Y-connector to your sub.
Top of pagePrevious messageNext messageBottom of page Link to this message

Taylor
Unregistered guest
Edit Post

If it is a JBL, then one of the inputs (left, I believe), should be LFE (low frequency signals only) that comes directly from your receiver. Just connect the sub out to the LFE jack. I know that the JBL PB-12 works that way.
Top of pagePrevious messageNext messageBottom of page Link to this message

New member
Username: Sbull

Post Number: 6
Registered: 02-2004
Edit Post

If anyone needs a quality Y connector, just ran across this at Parts Express:
http://www.partsexpress.com/pe/showdetl.cfm?&User_ID=18419390&St=9806&St2=-80707 133&St3=70683438&DS_ID=3&Product_ID=117481&DID=7
Thanks, Hawk. I was looking for a place to order decent cabling at a reasonable price.
Top of pagePrevious messageNext messageBottom of page Link to this message

New member
Username: Trekz_inc®

Post Number: 3
Registered: Jun-04
Edit Post

I myself have a Y connector from the receiver to a 500 watt peavey amp. I have a pair of subs on each side of the front speakers....works great!! Sounds great as well.
Topics | Last Day | Search | Formatting Tips | Terms | Rules | Help | Log out | Bookmark and Share
Home > Message Board > Accessories > Cables > Archive through July 23, 2004 > Y - Connector for Subwoofers???? Pl... [ « Previous ] [ Next » ]