| Author |
Thread: 2 antennas on the roof? |
    
New member Username: Zeekh
Post Number: 1
Registered: Feb-05
|
| Posted on Saturday, February 05, 2005 - 07:22 pm: |
|
Hi I'm new here. Just had a quick question. I was thinking about putting 2 anteenas on my roof to pick up a more OTA broadcast stations. I will probably use the same mast to mount them. Will using 2 antennas adversely effect my picture quality in anyway? Thanks Tim |
|
|
|
Bronze Member Username: Captain
Post Number: 56
Registered: Jul-06
|
| Posted on Thursday, July 20, 2006 - 06:14 pm: |
|
testing
1
2
3 |
Bronze Member Username: Captain
Post Number: 57
Registered: Jul-06
|
| Posted on Thursday, July 20, 2006 - 06:15 pm: |
|
1 2 3 34 4 5 |
Bronze Member Username: Captain
Post Number: 58
Registered: Jul-06
|
| Posted on Thursday, July 20, 2006 - 06:15 pm: |
|
test |
Bronze Member Username: Captain
Post Number: 59
Registered: Jul-06
|
| Posted on Thursday, July 20, 2006 - 06:16 pm: |
|
test1 |
Bronze Member Username: Captain
Post Number: 60
Registered: Jul-06
|
| Posted on Thursday, July 20, 2006 - 06:16 pm: |
|
1 |
New member Username: Jwill
Post Number: 1
Registered: Aug-06
|
| Posted on Monday, August 14, 2006 - 02:59 pm: |
|
If they are pointing in different directions then you can use 2 sockets on the receiver, or combine them into one lead with a diplexer. All you need is to ensure that they are separated vertically by a distance equal to a minimum of a half a wavelength.
If you are pointing both in the same direction they can be joined together to increase signal with a phasing harness, which requires some maths to get it to work properly. They still need the vertical separation to work properly. |
|
