Home > Message Board > Car Audio > Amplifiers > Archive through September 18, 2004 > Can I do this?
Main Topics Main Topics   Your Account Your Account Search Search   Help/Instructions Help
Today's Posts Today's Posts | Last 3 Days Bookmark and Share
Author Thread: Can I do this?
Top of pagePrevious messageNext messageBottom of page Link to this message

Bronze Member
Username: Tylermoncrief

Post Number: 19
Registered: May-04
Edit Post

Ok, Im reading up on amps and stuff...

And I was wondering if I could do this

Say I would have 2 kicker solo barics.
Dual 2 Ohm Voice Coils
and they are 2000 Watts RMS combined
and I had a 1800watt RMS Mono block amp

Is there a way I could wire that amp to power both subs at 900 watts?

Even tho the amp is mono
Top of pagePrevious messageNext messageBottom of page Link to this message

Silver Member
Username: Pat_l

Tucson, AZ
USA

Post Number: 560
Registered: Apr-04
Edit Post

Your saying you want to lower a RMS rating by 100W. Well thats not gonna happen, but you will only be underpowering your subs by 200W, so it may not make a huge differance. Try it and see but i would consider a bigger amp because 1000W RMS sub are big subs that dont like to be underpowered.
Top of pagePrevious messageNext messageBottom of page Link to this message

Bronze Member
Username: Tylermoncrief

Post Number: 20
Registered: May-04
Edit Post

Ok I found an amp that is 2200 RMS...Is that good enough
Top of pagePrevious messageNext messageBottom of page Link to this message

Silver Member
Username: Southernrebel

Louisiana
USA

Post Number: 160
Registered: Mar-04
Edit Post

yes, you can (and those subs will do pretty well w/ 900w each)

if you wire the subs to the 1800w amp each sub will get 900watts.

this is assuming that the amp puts out 1800 watts a 2 ohm and you wire teh subs in series-parrallel.

if the amp puts out 1800wrms at 1ohm the you would need DVC 4 ohm sub (wired parrallel)to get effect.
Top of pagePrevious messageNext messageBottom of page Link to this message

Silver Member
Username: Southernrebel

Louisiana
USA

Post Number: 161
Registered: Mar-04
Edit Post

what brand of amps are you looking at???
Top of pagePrevious messageNext messageBottom of page Link to this message

Silver Member
Username: Caraudiofng

Houston, TX

Post Number: 266
Registered: Aug-04
Edit Post

An amp that puts out 2200w RMS true will be around $1000 as Jonathan said, some approaching $2000. What is this amp you're refering to?
Top of pagePrevious messageNext messageBottom of page Link to this message

Johnathan
Unregistered guest
Edit Post

i didnt say that
Top of pagePrevious messageNext messageBottom of page Link to this message

Bronze Member
Username: Tylermoncrief

Post Number: 21
Registered: May-04
Edit Post

This is the amp I seen...I could get 2 of these just to be on the safe side. and have them power each sub

http://cardiscountstereos.com/catalog%20page.asp?Product+%23=HTG264
Top of pagePrevious messageNext messageBottom of page Link to this message

Gold Member
Username: Jonathan_f

GA
USA

Post Number: 1636
Registered: May-04
Edit Post

Cheap way to get that much is two JBL 1200.1, wire each sub for a 1 ohm load on each amp. A quality 2200W amp will be over $1000 usually, yes. There are amps for less, but not many good ones. Two Kicker 1200.1s would do it as well.
Top of pagePrevious messageNext messageBottom of page Link to this message

Bronze Member
Username: Tylermoncrief

Post Number: 22
Registered: May-04
Edit Post

But that Kicker 1200.1s say it only pumps out 1200 watts at 1 ohm...My Kickers are 2 Ohm Dual Voice Coils
Topics | Last Day | Search | Formatting Tips | Terms | Rules | Help | Log out | Bookmark and Share
Home > Message Board > Car Audio > Amplifiers > Archive through September 18, 2004 > Can I do this? [ « Previous ] [ Next » ]