| Author |
Thread: 2 Alpine Type-R 10" 2 ohm |
    
New member Username: Andysila
Post Number: 2
Registered: Aug-04
|
| Posted on Sunday, August 29, 2004 - 01:30 pm: |
|
i have 2 of the 10" type-r.. what amp,box,and wiring would you suggest? |
|
|
|
|
| Posted on Sunday, August 29, 2004 - 03:18 pm: |
|
Get an enclosed box they will hit harder.get a 500 watt wiring kit. As for the amp, How Many Watts Are They? A 600 watt amp would work just fine If they are 250 rms. |
New member Username: Andysila
Post Number: 3
Registered: Aug-04
|
| Posted on Sunday, August 29, 2004 - 04:21 pm: |
|
i was thinking the Alpine MRD-M501.... would that be good? i got a 2000 honda civic... which box would be best, bandpass? |
|
| Posted on Sunday, August 29, 2004 - 05:03 pm: |
|
Yes that would be an excellent amp That requires 4 gauge wiring kit Sealed enclosure would hit way harder. the bandpass box will hit too but not as much as the sealed box. |
New member Username: Andysila
Post Number: 4
Registered: Aug-04
|
| Posted on Sunday, August 29, 2004 - 11:08 pm: |
|
where can i get the box and which brand/model do you recomend? and will i need a new alternator if i dont want the lights to dim ? |
Gold Member Username: Its_bacon12
Hfl,
Ny
Usa
Post Number: 1001
Registered: Dec-03
|
| Posted on Sunday, August 29, 2004 - 11:36 pm: |
|
bandpass is awful for quality sound, seriously...it has spiked frequencies for SPL but it rolls off HORRIBLY below the tuning frequency and it just sounds absolutely horrid
sealed is reccomended for type-r's but a ported box built to specs is always the loudest for the amount of power you put into the driver |
New member Username: Andysila
Post Number: 5
Registered: Aug-04
|
| Posted on Monday, August 30, 2004 - 09:22 pm: |
|
so what do you recommend i get all together ? |
|
