| Author |
Thread: Diagram for 2004 Jeep Grand Cherokee |
    
|
| Posted on Tuesday, August 17, 2004 - 12:43 am: |
|
can any help.I have an Autopage RS-850 with a DEI 455J door lock module and a DEI 556U by-pass module.Having problems with the door trigger and door locks,it locks and unlocks,but only unlocks the driver door.And I have a car starter,it works,but the BRAKE,ABS,AIR BAG light stays on.here is what I hooked up this is from the Autopage.STARTER OUTPUT=YELLOW//+12V=RED&PINK/BLACK //IGNITION OUTPUT=DK.BLUE//ACC.OUTPUT=RED&BLACK//. Do I need a IGNITION 2 OUTPUT and a SECOND ACC.OUTPUT. I did not jook these up, but it still starts,but the BRAKE,ABS,AIR BAG light stays on.need help |
|
|
|
New member Username: Ps1k0
RI
Post Number: 4
Registered: Aug-04
|
| Posted on Monday, August 23, 2004 - 01:04 am: |
|
sounds like you are missing an accessory or an ignition wire for the lights.
accorging to www.bulldogsecurity.com
you are going to need 2 relays in each door for the locks to work right
|
|
| Posted on Monday, August 23, 2004 - 11:05 pm: |
|
http://www.bulldogsecurity.com/wireing%20diagrams2.htm
If you post the site this way they don't have to search and the new way you will have to register after Sept. 1st... |
New member Username: Ps1k0
Post Number: 9
Registered: Aug-04
|
| Posted on Tuesday, August 24, 2004 - 03:20 pm: |
|
yes, but you see i was preparing them for the sept 1st change ;)
actually, i've never seen that page b4.
|
|
