| Author |
Thread: Amp Suggestion |
    
|
| Posted on Thursday, July 01, 2004 - 04:29 pm: |
|
Im planning on using two 12 inch Alpine SWS-1242D and I want to power both through a single amp and i was wondering what amp would work the best for doing this. Any suggestions? |
|
|
|
Bronze Member Username: Jamtochristian
Williamsport,
Pennsylvania
USA of course!
Post Number: 92
Registered: Mar-04
|
| Posted on Thursday, July 01, 2004 - 05:13 pm: |
|
I would get a JBL 1200.1. This'll be best because obviously, the Class D amps are more efficient thus saving you on amperees coming from the alternator, and this amp can run two of these subs at 600 watts and a total load of 4 ohms. This is nice because it will not have as much harmonic distortion if you were to get the 600 watt JBL and wire it down to a lower load. So... this is my recommendation. They're about 250 on ebay. |
Silver Member Username: Jayj
Post Number: 226
Registered: May-04
|
| Posted on Thursday, July 01, 2004 - 05:27 pm: |
|
WHAT?????? Man those are 200 watt subs and you are telling him a JBL1200.1?????? If he puts that to those they will shoot out of the frame and hit him in the head. THATS WAY TO MUCH. If anything get a JBL 600.1 and turn it DOWN. Because those subs only take 400 watts together. |
Silver Member Username: Jayj
Post Number: 227
Registered: May-04
|
| Posted on Thursday, July 01, 2004 - 05:28 pm: |
|
WHAT?????? Man those are 200 watt subs and you are telling him a JBL1200.1?????? If he puts that to those they will shoot out of the frame and hit him in the head. THATS WAY TO MUCH. If anything get a JBL 600.1 and turn it DOWN. Because those subs only take 400 watts together. |
|
