| Author |
Thread: I want to insulate.. Any other way then dynamat? |
    
Bronze Member Username: Andrew35
Post Number: 20
Registered: Oct-08
|
| Posted on Wednesday, April 15, 2009 - 10:56 am: |
|
I want to insulate.. Any other way then dynamat? It would get rather expensive |
|
|
|
Bronze Member Username: Andrew35
Post Number: 21
Registered: Oct-08
|
| Posted on Wednesday, April 15, 2009 - 12:34 pm: |
|
my music gets pretty loud inside the vehicle. but even when its fairly low, its heard loudly outside the vehicle. |
Silver Member Username: Vivi2000
Owosso,
Mi
Post Number: 154
Registered: Aug-07
|
| Posted on Wednesday, April 15, 2009 - 05:44 pm: |
|
There are many other sound dampeners out there. I have seen RAAMAT reccomended on some fourms over and over again because of its price and quality. Fatmat is also inexpensive, but I have never used either of them so i could not tell you how they would do. |
Bronze Member Username: Andrew35
Post Number: 22
Registered: Oct-08
|
| Posted on Thursday, April 16, 2009 - 12:14 am: |
|
hmm. i'll just have to research it. i've even contemplated putting several layers of cardboard in my panels :p |
New member Username: Blessedapparatus
USA
Post Number: 4
Registered: Apr-09
|
| Posted on Thursday, April 16, 2009 - 07:51 pm: |
|
EternalDesigns has
$1 / Sq Ft [ 40-45mils thickness ]
$2 / Sq Ft [ 80-85mils Thickness; I have this, works very well ]
$3-4 / Sq Ft [ 90 ? or 100 ? mils Thickness ]
85mils cost me $120 for the whole car outfitted. Not every single spot but most important spots where road / other noises come in significantly |
Bronze Member Username: Andrew35
Post Number: 23
Registered: Oct-08
|
| Posted on Thursday, April 16, 2009 - 11:36 pm: |
|
sounds pretty good. my target area is the door panels. do u have a link for that site? |
|
