| Author |
Thread: Quick question |
    
Bronze Member Username: That_guy_u_dont_know
Kaplan,
Louisiana
United States
Post Number: 58
Registered: Dec-08
|
| Posted on Friday, January 02, 2009 - 04:25 pm: |
|
i hooked my amp up put hooked up the sub nothing comes out the sub at all not even a slight movement at any volume and yes everything is hooked up right
wat could this be? |
|
|
|
Gold Member Username: Talon01
Team Revolution ,
Pa
Usa
Post Number: 1946
Registered: Jun-07
|
| Posted on Friday, January 02, 2009 - 04:31 pm: |
|
power light on? |
Bronze Member Username: That_guy_u_dont_know
Kaplan,
Louisiana
United States
Post Number: 59
Registered: Dec-08
|
| Posted on Friday, January 02, 2009 - 04:33 pm: |
|
yeap the power light is green and not blinking nothing |
Platinum Member Username: Wingmanalive
A pic is worth
1000 posts!!
Post Number: 19547
Registered: Jun-06
|
| Posted on Friday, January 02, 2009 - 04:37 pm: |
|
Muted? |
Gold Member Username: Talon01
Team Revolution ,
Pa
Usa
Post Number: 1947
Registered: Jun-07
|
| Posted on Friday, January 02, 2009 - 04:38 pm: |
|
rca's connected?
get a 9v batt and touch the speaker wires from the sub to the connections on top and see if it pops. just tap it dont hold it!!! |
Bronze Member Username: That_guy_u_dont_know
Kaplan,
Louisiana
United States
Post Number: 60
Registered: Dec-08
|
| Posted on Friday, January 02, 2009 - 04:40 pm: |
|
rcas or connected and that sounds like it will mess up something rather not risk that
and paul im not that stupid |
Gold Member Username: Talon01
Team Revolution ,
Pa
Usa
Post Number: 1948
Registered: Jun-07
|
| Posted on Friday, January 02, 2009 - 04:43 pm: |
|
do you have any way to test the sub? new or used? it wont hurt it btw i do it all the time.
correct rca connect from hu? |
Bronze Member Username: That_guy_u_dont_know
Kaplan,
Louisiana
United States
Post Number: 63
Registered: Dec-08
|
| Posted on Friday, January 02, 2009 - 04:52 pm: |
|
i had my L7 15 hooked up to it and it worked fine took it out cause i sold it and i had a old JL 10 layin around so i decided to hook it up and well nothing happens (i took the amp out with the L7 then put it back in when i wanted to put the 10 in)used sub i have it hooked up in my room and its workin so i dont think its the sub yea the rcas or connected right i havent changed anything since the last time the amp was in |
Platinum Member Username: Wingmanalive
A pic is worth
1000 posts!!
Post Number: 19548
Registered: Jun-06
|
| Posted on Friday, January 02, 2009 - 05:08 pm: |
|
"and paul im not that stupid"
Well sometimes I am so it never hurts to ask.
Take a close look at the tinsel leads. |
Gold Member Username: Somedonniedude
Illinois
Braaap MX
Post Number: 2241
Registered: May-07
|
| Posted on Friday, January 02, 2009 - 05:11 pm: |
|
Test your amps output with a multi-meter and your box terminals to see if everything is hooked up. |
Bronze Member Username: That_guy_u_dont_know
Kaplan,
Louisiana
United States
Post Number: 64
Registered: Dec-08
|
| Posted on Friday, January 02, 2009 - 05:13 pm: |
|
no terminal straight to sub..... tinsel leads? that would be and yes i know stupid question |
Silver Member Username: Tylersliva
St.Ignace,
Mi
U.S.
Post Number: 120
Registered: Oct-08
|
| Posted on Friday, January 02, 2009 - 07:08 pm: |
|
u know what i would do i would find someone that will let you try and hook their sub to it and see if it works... if it dont work somthin is wrong with amp... check all fuses and connections |
Platinum Member Username: Wingmanalive
A pic is worth
1000 posts!!
Post Number: 19550
Registered: Jun-06
|
| Posted on Friday, January 02, 2009 - 07:27 pm: |
|
Tinsel leads. You know, the thin silvery wires that connect the coil to the terminals? Check to see if one of them jarred loose. It happens. |
Bronze Member Username: That_guy_u_dont_know
Kaplan,
Louisiana
United States
Post Number: 65
Registered: Dec-08
|
| Posted on Saturday, January 03, 2009 - 01:57 am: |
|
i got it guys i changed the rcas to a diffrent one and it seems to work now lol |
