| Author |
Thread: RD hw free aired pluged in the wall |
    
Silver Member Username: Teamrevolution
ATLANTA,
GA
USA
Post Number: 421
Registered: May-07
|
| Posted on Tuesday, November 11, 2008 - 02:28 pm: |
|
http://www.youtube.com/watch?v=F5hiX9eHBLk
this 12" was damaged in shipping with a broken basket and ripped surreound.
I did 20 mins in a box a 15+ min free air before the sub failed. It failed from the coil rocking from being free aired. Sub never smoked had only a very slight smell and besides were the coil rocked it was still perfect no black coils or anything.
this vid is part 8 when if finally went |
|
|
|
Gold Member Username: Loc_out
Team RE XXX
Post Number: 2650
Registered: Feb-05
|
| Posted on Tuesday, November 11, 2008 - 02:35 pm: |
|
sweet vid steve. |
Bronze Member Username: Wickedbass
Nashville,
Tn
Post Number: 89
Registered: Jan-08
|
| Posted on Tuesday, November 11, 2008 - 03:20 pm: |
|
Awesome vid.
Not to thread jack but what is the recommended box for a 15" hw? |
Silver Member Username: Teamrevolution
ATLANTA,
GA
USA
Post Number: 423
Registered: May-07
|
| Posted on Tuesday, November 11, 2008 - 03:33 pm: |
|
iT WAS 25 AMP CIRCUIT so approx 3k free air
5 cubes total, 60 sq port opening , kind of basic box if you want you can call me tomarrow morning to design one. |
Bronze Member Username: Wickedbass
Nashville,
Tn
Post Number: 90
Registered: Jan-08
|
| Posted on Tuesday, November 11, 2008 - 03:51 pm: |
|
Its no biggie man i was just wondering. I am wanting to upgrade from my current setup but don't have 10 cubes in my honda for 2 15" hws. Ive got about 6 cubes in there now and it is a really tight fit getting the box in the trunk.
Thanks for the reply. |
Gold Member Username: Southernrebel
Monroe,
Louisiana
Team Audible...
Post Number: 7039
Registered: Mar-04
|
| Posted on Tuesday, November 11, 2008 - 05:50 pm: |
|
what load was the sub wired to? |
Gold Member Username: 04redmach1
Es DEALER,
GA
USA
Post Number: 2431
Registered: Mar-06
|
| Posted on Tuesday, November 11, 2008 - 07:11 pm: |
|
1 ohm if not mistaken.
Kevin |
Bronze Member Username: Lms
Post Number: 26
Registered: May-08
|
| Posted on Tuesday, November 11, 2008 - 10:12 pm: |
|
Dude, next time flip da light switch.
Are all rd subs built that tough? |
|
