| Author |
Thread: RD sonance(pics) |
    
Silver Member Username: Kingtutus
Lincoln,
Nebraska
U.s.a
Post Number: 358
Registered: Dec-07
|
| Posted on Wednesday, July 16, 2008 - 04:15 pm: |
|
 |
|
|
|
Silver Member Username: Kingtutus
Lincoln,
Nebraska
U.s.a
Post Number: 359
Registered: Dec-07
|
| Posted on Wednesday, July 16, 2008 - 04:22 pm: |
|
it finely got here!!!! my 18" rd sonance. this thing is a beast it weights 32 pounds and it has woven thisels a double stack magnet. now i just need a box for it. ill have a review then when i get it in my car. hopefully will be soon you can get one for 350 shipped. (im the only one in the world besides competitors to have one of these)  |
Gold Member Username: Jakeyplaysbass
St. Louis,
MO / ASU
Post Number: 3121
Registered: Jul-05
|
| Posted on Wednesday, July 16, 2008 - 04:48 pm: |
|
Cute lil thing. |
Silver Member Username: Kingtutus
Lincoln,
Nebraska
U.s.a
Post Number: 360
Registered: Dec-07
|
| Posted on Wednesday, July 16, 2008 - 04:54 pm: |
|
thanks |
Gold Member Username: 04redmach1
Es DEALER,
GA
USA
Post Number: 2178
Registered: Mar-06
|
| Posted on Wednesday, July 16, 2008 - 06:22 pm: |
|
Good stuff. Glad you got it. They get loud and sound very well, so hurry and get a box built.
Kevin |
Silver Member Username: Gibsonguy
Storrs,
CT
USA
Post Number: 295
Registered: May-08
|
| Posted on Wednesday, July 16, 2008 - 10:01 pm: |
|
if i had a bigger trunk, i would go with something like that. let me know how it sounds. should be quite the ground pounder. |
Platinum Member Username: Rovin
1 15 = 149.5 DBs
Trinidad & T...
Post Number: 14012
Registered: Jul-05
|
| Posted on Wednesday, July 16, 2008 - 10:16 pm: |
|
that sh1t is gonna pound ! .... |
Silver Member Username: Kingtutus
Lincoln,
Nebraska
U.s.a
Post Number: 361
Registered: Dec-07
|
| Posted on Wednesday, July 16, 2008 - 10:35 pm: |
|
o yeah expectancy in a ford contour trunk |
Platinum Member Username: Wingmanalive
A pic is worth
1000 posts!!
Post Number: 17486
Registered: Jun-06
|
| Posted on Wednesday, July 16, 2008 - 10:40 pm: |
|
18"=deeeeeeeep. |
Gold Member Username: Jkidder
Worlds gunna end,
In
2012
Post Number: 3662
Registered: Nov-05
|
| Posted on Thursday, July 17, 2008 - 11:24 am: |
|
beast and it weighs 32 lbs hahahaha
the cisco kid |
Diamond Member Username: Bestmankind
Post Number: 21783
Registered: Oct-05
|
| Posted on Thursday, July 17, 2008 - 11:38 am: |
|
that is a sick looking sub KT. i see myself trying out a 15 soon. |
Silver Member Username: Kingtutus
Lincoln,
Nebraska
U.s.a
Post Number: 362
Registered: Dec-07
|
| Posted on Thursday, July 17, 2008 - 02:36 pm: |
|
lol chad. kevin says it is just like the alpha v1 |
Silver Member Username: Teamrevolution
ATLANTA,
GA
USA
Post Number: 313
Registered: May-07
|
| Posted on Thursday, July 17, 2008 - 02:58 pm: |
|
Only in size.
The Sonance V.2 boasts a 50+ mm tall coil and 19mm of Xmax. It is available in poly or paper cones. Except the 18" that is paper only.
The Subwoofer Goes in Very small sealed and ported boxes.
Like the 18" you have performs best in 5 cubes ported instead of many 18" that need 8-10 cubes.
the 15" goes in 3 cubes ported and 2 cubes sealed.
They are dead on in SQ and deliver low bass notes on point. |
Silver Member Username: Teamrevolution
ATLANTA,
GA
USA
Post Number: 314
Registered: May-07
|
| Posted on Thursday, July 17, 2008 - 03:08 pm: |
|
They begin shipping to our dealers next week. |
Silver Member Username: Gibsonguy
Storrs,
CT
USA
Post Number: 303
Registered: May-08
|
| Posted on Thursday, July 17, 2008 - 03:10 pm: |
|
sounds good steve. i look forward to trying out many of rd's products in the future. |
Silver Member Username: Kingtutus
Lincoln,
Nebraska
U.s.a
Post Number: 363
Registered: Dec-07
|
| Posted on Thursday, July 17, 2008 - 04:06 pm: |
|
i cant wait in till i get a box made and it installed |
Gold Member Username: Mgbcs
Maple Grove,
Minnesota
Post Number: 2583
Registered: Dec-06
|
| Posted on Thursday, July 17, 2008 - 05:36 pm: |
|
When/where are you doing a box? |
Silver Member Username: Kingtutus
Lincoln,
Nebraska
U.s.a
Post Number: 364
Registered: Dec-07
|
| Posted on Thursday, July 17, 2008 - 05:49 pm: |
|
i need a design first then i can say if i am going to make it or if im going to have someone else do it for me. im not sure just yet |
Gold Member Username: Mgbcs
Maple Grove,
Minnesota
Post Number: 2584
Registered: Dec-06
|
| Posted on Thursday, July 17, 2008 - 06:36 pm: |
|
If you and Quentin have a table saw I'd make it for/with you guys. But I only have mine here and won't be back to school for a month... |
Gold Member Username: Kingandsons07
Lincoln,
NE TEAM RD
U.S.A
Post Number: 1079
Registered: Feb-07
|
| Posted on Thursday, July 17, 2008 - 07:43 pm: |
|
i'll be gettin one soon then yep |
Gold Member Username: Mgbcs
Maple Grove,
Minnesota
Post Number: 2585
Registered: Dec-06
|
| Posted on Thursday, July 17, 2008 - 09:22 pm: |
|
Yeah just let me know if you need some help. |
Silver Member Username: Kingtutus
Lincoln,
Nebraska
U.s.a
Post Number: 366
Registered: Dec-07
|
| Posted on Thursday, July 17, 2008 - 09:57 pm: |
|
ok thanks bcs |
Gold Member Username: Kingandsons07
Lincoln,
NE TEAM RD
U.S.A
Post Number: 1080
Registered: Feb-07
|
| Posted on Friday, July 18, 2008 - 12:53 am: |
|
OK I'll be getting one of these
http://www.sears.com/shc/s/s_10153_12605_Tools_Bench+Power+Tools_Table+Saws?sbf= Brand&sbv=Craftsman&sLevel=2
but idk what one to get. I'm willing to spend 300 but if the lower cost one can do the same that's what i need to know thanks BCS |
