| Author |
Thread: Making box for 12" type r how big should the hole cutout be |
    
Bronze Member Username: Dirtrider125
Post Number: 70
Registered: Apr-07
|
| Posted on Saturday, May 03, 2008 - 06:02 pm: |
|
how big is the cutout supposed to be where you put the sub in its a 12" |
|
|
|
Bronze Member Username: Dirtrider125
Post Number: 72
Registered: Apr-07
|
| Posted on Saturday, May 03, 2008 - 06:23 pm: |
|
its going in a 0.85 cubic foot sealed box powered by a kicker kx450.2 gettin 500 rms how will that sound good or should i get a ported box |
Silver Member Username: Waresgaragestereo
Fort Valley,
GA
Post Number: 136
Registered: Mar-08
|
| Posted on Monday, May 05, 2008 - 11:17 pm: |
|
flip the speaker over on the box and trace around it, drill a hole in the middle of the circle on the wood that you traced. cut it out with a jigsaw and stay about 3/4 of an inch INSIDE the circle. trim where needed. |
Silver Member Username: Waresgaragestereo
Fort Valley,
GA
Post Number: 137
Registered: Mar-08
|
| Posted on Monday, May 05, 2008 - 11:17 pm: |
|
it no rocket science. |
Gold Member Username: Nyyfan13
15 MAG
USA
Post Number: 9523
Registered: Jul-06
|
| Posted on Monday, May 05, 2008 - 11:23 pm: |
|
http://www.crutchfield.com/App/Product/Item/Main.aspx?g=520&i=500SWR1222&tp=111& tab=features_and_specs |
Silver Member Username: Dsmith07
NC
Http://com4....
Post Number: 799
Registered: Jun-06
|
| Posted on Monday, May 12, 2008 - 12:16 pm: |
|
10 13/16" |
|
