| Author |
Thread: Big 3 upgrade |
    
Silver Member Username: Deadrabit
Post Number: 352
Registered: Jun-07
|
| Posted on Tuesday, April 22, 2008 - 12:27 am: |
|
i found the wire to the alt to the battery.
but the wire from the battery to the ground and the ground to the chasy seem to be like one wire
it goes from the ground on the battery to the chaise and has a soldered place that grounds it like half way to the wire.
is this right?
its a vw golf 2000 if that helps any one |
|
|
|
Gold Member Username: Nd4spd18
Northwest PA
Post Number: 7424
Registered: Jul-06
|
| Posted on Tuesday, April 22, 2008 - 02:47 pm: |
|
So? You don't have to run the new wires to the same place as the stock ones. In fact I never do. |
Silver Member Username: Deadrabit
Post Number: 353
Registered: Jun-07
|
| Posted on Tuesday, April 22, 2008 - 04:38 pm: |
|
i already got it. thanks! |
Silver Member Username: Clouduz
Post Number: 338
Registered: Jun-06
|
| Posted on Tuesday, April 22, 2008 - 06:50 pm: |
|
sorry to hijack the thread, but for engine ground can i just pick a screw and ground it? |
Silver Member Username: Kklagge
San Diego
Post Number: 542
Registered: Dec-04
|
| Posted on Tuesday, April 22, 2008 - 06:51 pm: |
|
I would use a bolt on the frame...the ground is the most important part...you're going to the effort so do it right the 1st time. |
Silver Member Username: Clouduz
Post Number: 339
Registered: Jun-06
|
| Posted on Tuesday, April 22, 2008 - 07:01 pm: |
|
lol well i meant bolt but ok thnx so basically any bolt will work got it |
Silver Member Username: Kklagge
San Diego
Post Number: 543
Registered: Dec-04
|
| Posted on Tuesday, April 22, 2008 - 07:05 pm: |
|
a bolt on THE FRAME...not just a bolt on a flimsy piece of wheel well or something is your best bet. |
Silver Member Username: Deadrabit
Post Number: 355
Registered: Jun-07
|
| Posted on Tuesday, April 22, 2008 - 11:50 pm: |
|
my car doesn't have a frame  |
|
