| Author |
Thread: Cant get from door to battery with power cable for amp |
    
New member Username: Hendry91
Leatherhead,
Surrey
United Kingdom
Post Number: 3
Registered: Apr-08
|
| Posted on Wednesday, April 16, 2008 - 05:33 am: |
|
Hi, i have just got all my audio system and a wiring kit but the only problem is i cant access the battery to power the amp, i have a peugeot 206 1.1 lx. I cant even get the dashboard out. Any help would be gratefull thanks.
Dom |
|
Relevant Product Info
|
|
Silver Member Username: Kaerfpl
Spencerport,
NY
USA
Post Number: 890
Registered: Jun-06
|
| Posted on Thursday, April 17, 2008 - 04:10 am: |
|
Check near the steering column in the firewall for any pre-drilled holes to access. If not, then you will have to do some drilling! |
New member Username: Chaosofthemasses
Edwardsburg,
Michigan
Usa
Post Number: 2
Registered: May-08
|
| Posted on Tuesday, May 13, 2008 - 11:22 pm: |
|
joe S is correct if you look under neath the driver side dash and look in the the top right corner underneath there you may see a pre drilled hole if not be sure to look on the other side (on the engine side) to make sure you dont penetrate any thing as you drill. BE sure to use 4 AWG wire this is all you need for your pwer for your amp 8 awg works fine but the more power the more you need to upgrade wire size or you wont get as much efficiency out of your amp and may deplete your car more since it will take more power to feed the same thing so 4 gauge is most preferable with amp power wires! |
Gold Member Username: Safe_cracker
Chicago,
IL
US
Post Number: 4514
Registered: Jan-06
|
| Posted on Wednesday, May 14, 2008 - 12:23 am: |
|
Duhhh, run that sh!t under the car just stay away from the exhaust and make sure it is all fused. Make the entrance at the bottom of the trunk, away from the gas tank and use a grommet.. Polo. |
|
