| Author |
Thread: Awesome sq amp? |
    
Platinum Member Username: Bestmankind
Http://www.rdaudio.net...
Post Number: 19642
Registered: Oct-05
|
| Posted on Thursday, March 27, 2008 - 01:49 pm: |
|
Zapco REF350.2 - Zapco Reference 2 Ch. 350 Watt Amplifier
Stereo, 4 ohms: 2x100 Watts
Stereo, 2 ohms: 2x175 Watts
Bridged, 4 ohms: 1x350 Watts
T.H.D. + Noise: <0.015%
S/N Ratio: >95dB
Slew Rate: >29V/uS
Damping Factor: >200@4 ohms
Dimensions: 15"L x 7.5"W x 2"H
-SymbiLinkﾙ Balanced Inputs
-RCA Unbalanced Inputs
-2 ohm stereo stable
-18 dB variable bass boost
-Built in variable electronic crossover
-Bridgeable
-Three channel capable
-High Current Bi-Polar output devices
-Optically isolated MOSFET power supply
-Switch for use as stereo, single L ch. or R ch. bridge
-L+R Sum Mono switch for use as bass amp
-Surface mount technology w/1% resistors,
precision caps, and massive ground planes
or should i try out a dls amp? |
|
Relevant Product Info
|
|
Gold Member Username: Th3pwn3r
Post Number:...
Post Number: 7598
Registered: Jul-06
|
| Posted on Thursday, March 27, 2008 - 01:51 pm: |
|
I thought you wanted all matching amps Chad? |
Platinum Member Username: Bestmankind
Http://www.rdaudio.net...
Post Number: 19644
Registered: Oct-05
|
| Posted on Thursday, March 27, 2008 - 01:52 pm: |
|
its just an idea. the rd amps are awesome for bass but i need a bit more than 55wrms for my comps. 150 is too much. |
Gold Member Username: Insearchofbass
Post Number: 8664
Registered: Jun-04
|
| Posted on Thursday, March 27, 2008 - 01:57 pm: |
|
you could try a mcintosh
http://mcintoshstore.com/Home-Audio/McIntosh-Car-Audio |
Platinum Member Username: Bestmankind
Http://www.rdaudio.net...
Post Number: 19645
Registered: Oct-05
|
| Posted on Thursday, March 27, 2008 - 01:59 pm: |
|
too expensive sean. the zapco can be bought for 400 bux. |
Gold Member Username: Philly306
New quote coming soon,
North carolina
Post Number: 1004
Registered: Apr-07
|
| Posted on Thursday, March 27, 2008 - 02:05 pm: |
|
if i had a choice i would choose a dls amp, just for thier reputation and the fact they are from Sweden |
Gold Member Username: Denali_on_22s
I get Bucks like Milwa...
Post Number: 4882
Registered: Feb-06
|
| Posted on Thursday, March 27, 2008 - 02:13 pm: |
|
dls just to match the comps  |
Platinum Member Username: Bestmankind
Http://www.rdaudio.net...
Post Number: 19647
Registered: Oct-05
|
| Posted on Thursday, March 27, 2008 - 02:14 pm: |
|
if i get the dls this is the one.
Ultimate TA2 - Tube amplifier 2 x 100 W
Specifications
Number of channels 2
Amplifier class AB
Output power in 4 ohm 2 x 100 W
Output power in 2 ohm 2 x 200 W
Mono bridge mode 4 ohm N/A
Damping factor >240
S/N ratio, A-weighted >102 dB
Frequency range 10 Hz - 50 kHz
Input sensitivity 0,5 - 7V
Input impedance > 10 kohm
Input impedance, high level N/A
High pass filter 20 - 200 Hz, 12 dB slope
Dual DC inputs 1
Power consumption (idle) 1,5 A
Power consumption (max) 40 A
Dimension (W x D x H) 410 x 240 x 73 mm (16,15 x 9,45 x 2,87 inch)
Rec. power cable Minimum 5AWG / 16 mm2 for each channel / kanal
Fuses 2 x 20 A
ULTIMATE series TA2 is a HiFi two-channel amplifier with 2 x 100 Watts output power. This is an extremely well-sounding amplifier for car use. We did not compromize in any section of the construction when we designed the electronic circuits. The TA2 is using the very best components in all sections of the amplifier, from the input circuitry, through the whole amplifier to the final output stage. Two pieces of CV4010 pentodes is used in the signal path. These tubes are made by VALVE Electronics in England during 1982 - 1984. The Valve Electronics company produced best sounding tubes in the tube industry before they closed. The tubes are spare parts for military equipment so they fulfil military specifications. We use silver wire Capacitors in signal path and power supply for a focused sound image. Special designed DLS Audio capacitors in key points and WIMA polypropylene capacitors. Four pieces of 4700 uF on each channel for a deep and wide sound stage. Dual mono power system design plus separate power supply for tube and pre-amp stage for clear sound reproduction.
- RMS output per channel at 13,8 volts, 20 Hz - 20 kHz , < 0,04% distortion. Separate level controls for each channel. |
Gold Member Username: Nd4spd18
Northwest PA
Post Number: 7047
Registered: Jul-06
|
| Posted on Thursday, March 27, 2008 - 02:22 pm: |
|
Take two good quality amps rated at low THDs. Would somebody like to tell me what makes one an "SQ amp" and another one not. haha.
I dare you to try and tell the difference between those amps. |
|
|
Gold Member Username: Philly306
New quote coming soon,
North carolina
Post Number: 1006
Registered: Apr-07
|
| Posted on Thursday, March 27, 2008 - 02:23 pm: |
|
one is DLS and one is Zapco
|
Platinum Member Username: Bestmankind
Http://www.rdaudio.net...
Post Number: 19648
Registered: Oct-05
|
| Posted on Thursday, March 27, 2008 - 02:23 pm: |
|
m.s. the title is a figure of speech. lol. just trying to get the best possible amp. |
Gold Member Username: Th3pwn3r
Post Number:...
Post Number: 7603
Registered: Jul-06
|
| Posted on Thursday, March 27, 2008 - 02:24 pm: |
|
Lol M.S. you got owned. |
Silver Member Username: Drant19
DUB-C,
TX
Post Number: 537
Registered: Aug-07
|
| Posted on Thursday, March 27, 2008 - 02:25 pm: |
|
what about audison? |
Silver Member Username: Drant19
DUB-C,
TX
Post Number: 538
Registered: Aug-07
|
| Posted on Thursday, March 27, 2008 - 02:26 pm: |
|
http://www.woofersetc.com/index.cfm?fuseaction=product.display&Product_ID=4287
got the power you need and an awesome amp |
Platinum Member Username: Bestmankind
Http://www.rdaudio.net...
Post Number: 19649
Registered: Oct-05
|
| Posted on Thursday, March 27, 2008 - 02:28 pm: |
|
audison looks good too. damn so many choices. lol.
as for subs and sub amps, i am sticking with rd audio. |
Silver Member Username: Drant19
DUB-C,
TX
Post Number: 539
Registered: Aug-07
|
| Posted on Thursday, March 27, 2008 - 02:29 pm: |
|
good call...
ya theres to many amps to choose just 1. why not get a kicker or alpine? just wondering why u want high$$$ equipment. |
Platinum Member Username: Bestmankind
Http://www.rdaudio.net...
Post Number: 19650
Registered: Oct-05
|
| Posted on Thursday, March 27, 2008 - 02:32 pm: |
|
for the bragging rights. lol. |
Gold Member Username: Nd4spd18
Northwest PA
Post Number: 7048
Registered: Jul-06
|
| Posted on Thursday, March 27, 2008 - 02:36 pm: |
|
Haha Chad I feel ya. |
Platinum Member Username: Bestmankind
Http://www.rdaudio.net...
Post Number: 19651
Registered: Oct-05
|
| Posted on Thursday, March 27, 2008 - 02:50 pm: |
|
lol yeah.
besides i've always wanted to try out a zapco. |
Platinum Member Username: Rovin
4 10 Pioneer...
Post Number: 13433
Registered: Jul-05
|
| Posted on Thursday, March 27, 2008 - 02:59 pm: |
|
i would go DLS - after all they wouldnt make a shiddy amp for their speakers right !? .....& like u i would prefer my sh1t to match ...... |
Platinum Member Username: Bestmankind
Http://www.rdaudio.net...
Post Number: 19652
Registered: Oct-05
|
| Posted on Thursday, March 27, 2008 - 03:01 pm: |
|
ima go talk to the dealer this saturday about the dls. if i can get it for around the price of the zapco then dls it is. |
Gold Member Username: Jakeyplaysbass
St. Louis,
MO / ASU
Post Number: 2528
Registered: Jul-05
|
| Posted on Thursday, March 27, 2008 - 03:03 pm: |
|
If you get zapco get the comp series. The refs are good, dont get me wrong but the competition are crazy. Maybe try and find a used C2K 3.0x?
For the price I would probably go with the DLS though. I cant see myself spending $650+ on the zapco that does 75x2 @4ohm... its pretty stupid if you think about it. |
Platinum Member Username: Bestmankind
Http://www.rdaudio.net...
Post Number: 19653
Registered: Oct-05
|
| Posted on Thursday, March 27, 2008 - 03:06 pm: |
|
you have a good point jake.
here are some pics of the dls insides. not bad of an inside for an amp that does 100 x 2 @ 4ohms.
 |
Gold Member Username: Denali_on_22s
I get Bucks like Milwa...
Post Number: 4888
Registered: Feb-06
|
| Posted on Thursday, March 27, 2008 - 04:20 pm: |
|
if you've always wanted zapco then get it chadly. hell you have tried everything else, haha. |
Platinum Member Username: Bestmankind
Http://www.rdaudio.net...
Post Number: 19655
Registered: Oct-05
|
| Posted on Thursday, March 27, 2008 - 04:58 pm: |
|
yeah the dls i post up there goes for $2000+. i don't think i'll get that. lol. |
Gold Member Username: Jakeyplaysbass
St. Louis,
MO / ASU
Post Number: 2529
Registered: Jul-05
|
| Posted on Thursday, March 27, 2008 - 05:11 pm: |
|
Haha yeah... You would have to get the DLS Ult A2.
I didnt even notice you put the TA2...that things crazy. Mobilesq has the A2 for 440+shipping, but they go for like 550 in shops. Id almost rather paying the extra 100 tho...never know what could happen.
You could also do the DLS Ref RA20...rated at 100x2@4 but its really closer to 140-150. |
Gold Member Username: Jakeyplaysbass
St. Louis,
MO / ASU
Post Number: 2530
Registered: Jul-05
|
| Posted on Thursday, March 27, 2008 - 05:18 pm: |
|
I hate to throw another amp into the mix...but i have to.
Helix B2 Precision 80x2@4ohm@12volts. I would put it above the DLS A2 and Zapco ref but not quite as good as the zapco comp 3.0x. I think they are close to 800 new...but if you can get one used it would be awesome. |
Platinum Member Username: Bestmankind
Http://www.rdaudio.net...
Post Number: 19657
Registered: Oct-05
|
| Posted on Thursday, March 27, 2008 - 05:30 pm: |
|
ok i am only thinking of spending 500 or less. the shop where i got my dls speakers gave it to me for less than mobilesq so i am sure the amp will be less too. if i can get the Ult A2 for around 400 bux it would be sweet.
the zapco c2k is just too pricey for me though. i can't be spending that much money on component amps. no matter how much i want to brag. lol. |
Gold Member Username: Frkkevin
¤ Resonant Engineering...,
¤ Fort Worth...
Email
Post Number: 4842
Registered: Nov-05
|
| Posted on Thursday, March 27, 2008 - 05:36 pm: |
|
chad run all dls .. matching comp/sub amp
if you didn't need soo much power for your sub i'd say get a dls 5 channel |
Gold Member Username: Jakeyplaysbass
St. Louis,
MO / ASU
Post Number: 2532
Registered: Jul-05
|
| Posted on Thursday, March 27, 2008 - 05:42 pm: |
|
Good call on that one Jack. Think about doing that Chadly. |
Platinum Member Username: Bestmankind
Http://www.rdaudio.net...
Post Number: 19659
Registered: Oct-05
|
| Posted on Thursday, March 27, 2008 - 06:27 pm: |
|
that would be awesome but no. i am more than happy with rd audio. |
Gold Member Username: Frkkevin
¤ Resonant Engineering...,
¤ Fort Worth...
Email
Post Number: 4845
Registered: Nov-05
|
| Posted on Thursday, March 27, 2008 - 06:46 pm: |
|
how can you say that if you've never tried a dls amp |
Gold Member Username: Van_man
Boston South,
MA
Post Number: 3741
Registered: Mar-06
|
| Posted on Thursday, March 27, 2008 - 08:06 pm: |
|
The C2k is nice, the dc line is more affordable, and a killer line of amps. I do like the tubes in the DLS tho. Tough choice chad. But if your going tube, look at Butler and Helix too. |
Gold Member Username: Safe_cracker
Chicago,
IL
US
Post Number: 4322
Registered: Jan-06
|
| Posted on Thursday, March 27, 2008 - 08:16 pm: |
|
I like my Kicker SX900.4, but finding a spot for it is tough. Polo.. |
Gold Member Username: Big_edge_head
Milwaukee,
Wisconsin
MY SUBS GET ...
Post Number: 1771
Registered: Mar-07
|
| Posted on Friday, March 28, 2008 - 12:16 am: |
|
I can think of a spot to put it... |
Gold Member Username: Philly306
New quote coming soon,
North carolina
Post Number: 1012
Registered: Apr-07
|
| Posted on Friday, March 28, 2008 - 12:18 am: |
|
Straight up your gäy äss polo |
Gold Member Username: The_image_dynamic
San Diego, California
Post Number: 3633
Registered: Dec-06
|
| Posted on Friday, March 28, 2008 - 12:19 am: |
|
x2 |
Gold Member Username: Tatonka
-[Team Audib...
Post Number: 1570
Registered: Mar-07
|
| Posted on Friday, March 28, 2008 - 12:20 am: |
|
x3 |
Gold Member Username: Joebruce
15 AQ HD3
Post Number: 1872
Registered: May-04
|
| Posted on Friday, March 28, 2008 - 12:27 am: |
|
x4 |
Gold Member Username: Nyyfan13
15 MAG
USA
Post Number: 9062
Registered: Jul-06
|
| Posted on Friday, March 28, 2008 - 12:29 am: |
|
x5 |
Silver Member Username: Wolf_hound
Phoenix,
AZ
Post Number: 606
Registered: Sep-05
|
| Posted on Friday, March 28, 2008 - 12:32 am: |
|
x6 |
Platinum Member Username: Rovin
4 10 Pioneer...
Post Number: 13436
Registered: Jul-05
|
| Posted on Friday, March 28, 2008 - 12:39 am: |
|
wow - what did polo ever do to u guys !?
get the matching DLS amp ! ........ |
Platinum Member Username: Bestmankind
Http://www.rdaudio.net...
Post Number: 19663
Registered: Oct-05
|
| Posted on Friday, March 28, 2008 - 10:14 am: |
|
they are all messing around rovin. polo is one of the coolest guy here and i doubt they would be serious about what they are saying. lol.
ima order the dls amp today. |
Gold Member Username: Frkkevin
¤ Resonant Engineering...,
¤ Fort Worth...
Email
Post Number: 4850
Registered: Nov-05
|
| Posted on Friday, March 28, 2008 - 10:21 am: |
|
nothing against rd but i dont see your rd amps hanging with zapco/dls in the sq department |
Platinum Member Username: Bestmankind
Http://www.rdaudio.net...
Post Number: 19664
Registered: Oct-05
|
| Posted on Friday, March 28, 2008 - 10:24 am: |
|
i know what your saying kev. but for sub and sub amp i am more than happy with what i have. |
Gold Member Username: Frkkevin
¤ Resonant Engineering...,
¤ Fort Worth...
Email
Post Number: 4851
Registered: Nov-05
|
| Posted on Friday, March 28, 2008 - 10:26 am: |
|
but matching amps FTW chad |
Platinum Member Username: Bestmankind
Http://www.rdaudio.net...
Post Number: 19665
Registered: Oct-05
|
| Posted on Friday, March 28, 2008 - 10:27 am: |
|
lets see what happens.
btw kev, i ordered the mmats eq this past monday and the shop just got it in yesterday. ima go pick it up tomorow. its a basic 5 band eq/10v line driver. i am very curious to see how that will work out. will have pics and stuff tomorow or sunday. |
Platinum Member Username: Bestmankind
Http://www.rdaudio.net...
Post Number: 19666
Registered: Oct-05
|
| Posted on Friday, March 28, 2008 - 10:29 am: |
|
the dls ultimate A6 amp does look awesome though |
Gold Member Username: Frkkevin
¤ Resonant Engineering...,
¤ Fort Worth...
Email
Post Number: 4852
Registered: Nov-05
|
| Posted on Friday, March 28, 2008 - 10:30 am: |
|
yea.. A6 = secks |
Platinum Member Username: Rovin
4 10 Pioneer...
Post Number: 13445
Registered: Jul-05
|
| Posted on Friday, March 28, 2008 - 12:01 pm: |
|
''''''its a basic 5 band eq/10v line driver'''''
hey that 10v is pretty good - only other pre i can think of right now is soundstream 5x0 & 6x0 ...that 10v makes a really noticable difference & its convenient too .... |
Platinum Member Username: Bestmankind
Http://www.rdaudio.net...
Post Number: 19673
Registered: Oct-05
|
| Posted on Friday, March 28, 2008 - 12:44 pm: |
|
its done. i just ordered the amp. its the dls ultimate A3. check out the specs on this thing. at 1ohm mono it can do 1200wrms. lol.
RMS output per channel at 13,8 volts, 20 Hz - 20 kHz , < 0,1% distortion.
Mode : AB
Number of channels : 2
Nominal power in 4 ohm : 2 x 100 Watt
Typical power in 4 ohm : 2 x 150 watt
Typical power in 2 ohm : 2 x 270 Watt
Typical power in 1 ohm : 2 x 425 Watt
Typical power in 4 ohm bridge mode : 550 Watt
Typical power in 2 ohm bridge mode : 870 Watt
Typical power in 1 ohm bridge mode : 1200 watt
S / N ratio, A-weighted : > 100 dB
Damping factor : > 200
Input impedance : > 10 kohm
Input sensitivity, variable : 0,2 - 7 V
Filter, highpass, variable : 20 - 200 Hz
Filter lowpass, variable : 50-125 Hz
Terminal for external cooling fan : Yes
Double DC-inputs : Yes
Phase shift button : Yes
Current draw, idle : 1,1 A
Current draw, maximum : 140 A
Dimensions W x D x H : 410 x 240 x 73 mm (16,15 x 9,45 x 2,87 inch)
Weight
: 6,2 kg ( 13,67 lb) |
Platinum Member Username: Rovin
4 10 Pioneer...
Post Number: 13447
Registered: Jul-05
|
| Posted on Friday, March 28, 2008 - 01:00 pm: |
|
shweeeeeeeet !
sure does suck alot of current since i think im seeing 2 power inputs there
noticed no rca outs too
but thats a awesome amp .... |
Gold Member Username: Jkidder
Gunshine ,
State
Flawda
Post Number: 3420
Registered: Nov-05
|
| Posted on Friday, March 28, 2008 - 01:02 pm: |
|
such a sweet amp. dual power supply right? |
|
|
