| Author |
Thread: Cheap component set or reg speakers |
    
Silver Member Username: Dj_excite
Post Number: 153
Registered: May-04
|
| Posted on Thursday, March 20, 2008 - 11:34 pm: |
|
i was thinking of changing my front speakers in my mazda 3 but i don't know if i should go with a component set or just throw in some infinity 6x8's. I want a component set that has good mids good mid range bass and is pretty decent. I am trying to go cheap as possible so 100$ is my max i don't mind buying old models since i will be searching on ebay. |
|
Relevant Product Info
|
|
Gold Member Username: Adddisorder
Palm Beach,
Florida
Post Number: 6103
Registered: Jan-06
|
| Posted on Friday, March 21, 2008 - 12:34 am: |
|
go with phoenix gold RSD 6.5 comp set thats your best bet at that price point. |
Silver Member Username: Dj_excite
Post Number: 154
Registered: May-04
|
| Posted on Friday, March 21, 2008 - 12:51 am: |
|
will these fit the front because i have a choice of either putting in 6x8's or 5x7's would those fit.... |
Gold Member Username: Adddisorder
Palm Beach,
Florida
Post Number: 6110
Registered: Jan-06
|
| Posted on Friday, March 21, 2008 - 01:11 am: |
|
you can make or buy an adapter out of wood to fit the 6x8 stock hole and then cut a hole in that to fit the 6.5s. that is what most people do. |
Silver Member Username: Exige
Cincinnati
Post Number: 194
Registered: Nov-07
|
| Posted on Friday, March 21, 2008 - 12:35 pm: |
|
your gonna need an amp for those....can you budget for that? 100-150x2 is about what you'll need. if you're just looking to take out the stock speakers and put those in....running off the factory HU....don't expect very much from it. |
Silver Member Username: Dj_excite
Post Number: 155
Registered: May-04
|
| Posted on Friday, March 21, 2008 - 03:19 pm: |
|
yea an amp i can get no prob....my plan was to amp them anyways, they would sound like sht from the HU. |
Gold Member Username: Bnd_rulez
Phoenix,
AZ
USA
Post Number: 1726
Registered: Mar-05
|
| Posted on Saturday, March 22, 2008 - 10:44 am: |
|
Well if you got the 5 and 1/4s you could just buy a cheapo plastic conversion kit from eBay. I believe Metra makes one.
With 6.5's you might have to trim the door some. |
Silver Member Username: Dj_excite
Post Number: 157
Registered: May-04
|
| Posted on Saturday, March 22, 2008 - 03:05 pm: |
|
i don't want to trim at all i won't be putting in 6.5's unless they can mount in the 6x8 hole. |
Gold Member Username: Nd4spd18
Northwest PA
Post Number: 6922
Registered: Jul-06
|
| Posted on Saturday, March 22, 2008 - 03:16 pm: |
|
Then get 5 1/4 components and adapters.
And midbass depends on the installation, very little on the speaker. The speakers need an enclosure to perform properly. |
|
|
Gold Member Username: Adddisorder
Palm Beach,
Florida
Post Number: 6113
Registered: Jan-06
|
| Posted on Monday, March 24, 2008 - 06:19 pm: |
|
you can fit 6.5 in a 6x8 hole easy no trimming iv done it in several different cars. if you use MDF as a baffle use 1/2 or 3/4 if you got it laying around it depends on your door pannel but it will pace the speaker out enough and fit fine. |
