| Author |
Thread: So confused about gains still |
    
Silver Member Username: Surferdude9371
Im BTL Bumpin
Post Number: 531
Registered: Mar-07
|
| Posted on Friday, January 25, 2008 - 06:23 pm: |
|
i read something i thought that all the way turned clockwise is the lowest and turning it counter clockwise turns it up but that makes no sense pls help |
|
|
|
Gold Member Username: Big_edge_head
Milwaukee,
Wisconsin
IF IT DOESNT...
Post Number: 1244
Registered: Mar-07
|
| Posted on Friday, January 25, 2008 - 06:25 pm: |
|
Here you go...
http://www.bcae1.com/gaincon2.htm |
Silver Member Username: Surferdude9371
Im BTL Bumpin
Post Number: 532
Registered: Mar-07
|
| Posted on Friday, January 25, 2008 - 06:29 pm: |
|
so all the way left is more volts than all the way right? |
Gold Member Username: Big_edge_head
Milwaukee,
Wisconsin
IF IT DOESNT...
Post Number: 1245
Registered: Mar-07
|
| Posted on Friday, January 25, 2008 - 06:31 pm: |
|
no..... all the way left should be 0. at least every amp ive seen was like that. i think massive audio amps are reverse but im not sure. |
Gold Member Username: Nd4spd18
Northwest PA
Post Number: 5779
Registered: Jul-06
|
| Posted on Friday, January 25, 2008 - 06:36 pm: |
|
On all of my amps left is down (higher voltage) and right is up (lower voltage) |
Gold Member Username: Big_edge_head
Milwaukee,
Wisconsin
IF IT DOESNT...
Post Number: 1246
Registered: Mar-07
|
| Posted on Friday, January 25, 2008 - 06:42 pm: |
|
well yea u mean.......like if you had a high HU output voltage it would be to the left. and a lower preout voltage it would be to the right. .
iIt would be more to the right for lower volage from the HU.
and all the more to the left for a higher preout voltage from the HU.
Im gunna start confusing myself. lmao |
Silver Member Username: Surferdude9371
Im BTL Bumpin
Post Number: 533
Registered: Mar-07
|
| Posted on Friday, January 25, 2008 - 07:08 pm: |
|
like my hu is 2v rms should it b more left or right i have a kx2500.1 |
Gold Member Username: Van_man
Boston South,
MA
Post Number: 3283
Registered: Mar-06
|
| Posted on Friday, January 25, 2008 - 07:22 pm: |
|
If your HU is 2 volt, turn the gain to the 2 volt making. Match HU volts to amp gains.
Alternativly, Turn the gain all the way down, (Quite). Then turn the HU volume up to the maximum that you will ever turn it up. Like 3/4 or so. Then turn the gain clockwise till you reach the 2 volt mark, or you start to hear distortion. Tweek it back a hair and your set. |
Silver Member Username: Surferdude9371
Im BTL Bumpin
Post Number: 534
Registered: Mar-07
|
| Posted on Saturday, January 26, 2008 - 06:40 am: |
|
prob is my gain isnt marked in volts just numb 1 to 11 |
