| Author |
Thread: Jensen UV8 Parking brake bypass????? |
    
New member Username: Dieselonez
Post Number: 1
Registered: Sep-07
|
| Posted on Sunday, September 09, 2007 - 08:29 am: |
|
Hey guys.... just had a jensen UV8 7" touch screen installed... the guy installed a toggle switch... but we couldnt figure out the sequence to get that blue screen off. does anyone know the sequence or factory code for the Jensen UV8????
thanks in advance!!! |
|
Relevant Product Info
|
|
New member Username: Brink133
Post Number: 1
Registered: Sep-07
|
| Posted on Sunday, September 23, 2007 - 09:14 pm: |
|
Did you ever find out the factory code to this unit??? If you do get it let me know. |
New member Username: Brink133
Post Number: 2
Registered: Sep-07
|
| Posted on Sunday, September 23, 2007 - 09:17 pm: |
|
The sequence however is turn the switch on for 2 sec then off for 2sec then back on and leave it on. This worked on my UV8 but i would prefer to bypass permenantly. |
New member Username: Bykelife
Chicago,
IL
USA
Post Number: 2
Registered: Dec-07
|
| Posted on Friday, December 28, 2007 - 10:35 am: |
|
I'll do ya one better. Do this and you will never have to mess with the E Brake or any toggle ever again...:
1: Go into AM/FM mode
2: Hit "setup" on the remote control
3: Enter 543210 on the remote, listening for the beep for each number entered
4: A new menu will appear. Touch the button that has the hammer/screwdriver on it in the upper left-hand part of the screen.
5: Select Brake bypass to "ON" and hit the "X" near the bottom of the screen.
6: Use the unit wisely and above all safely. A ticket is one thing, causing a fatal accident due to negligence is another. |
|
