| Author |
Thread: Help Please!!!!!!!!!!!!!!!!!!!!!!!!!!! |
    
New member Username: Clark09_5hotmailcom
McCook,
Nebraska
Post Number: 4
Registered: Mar-07
|
| Posted on Monday, March 26, 2007 - 11:09 am: |
|
ok so i just hooked up my subs and amp and if i turn the bass up any louder than ten notches on my stock head unit it makes my subs cut out and about 5 seconds later they start bumpin again which if i turn the bass down than it wont do that. It should be hitting a lot harder than it is. any suggestions? also i have 4 guage wire |
|
|
|
Gold Member Username: Carguy
Post Number: 6033
Registered: Nov-04
|
| Posted on Monday, March 26, 2007 - 01:30 pm: |
|
You need to set the gain/level on the amp properly. If not, you'll the same problem repeating over and over till the amp dies. |
New member Username: Clark09_5hotmailcom
McCook,
Nebraska
Post Number: 8
Registered: Mar-07
|
| Posted on Monday, March 26, 2007 - 03:58 pm: |
|
I honestly dont know what that is |
Gold Member Username: Juliob
Santo Domingo
Dominican Re...
Post Number: 4304
Registered: Dec-05
|
| Posted on Monday, March 26, 2007 - 04:14 pm: |
|
well, then read the manual and learn a lil bit |
Gold Member Username: Carguy
Post Number: 6035
Registered: Nov-04
|
| Posted on Monday, March 26, 2007 - 05:24 pm: |
|
Look at the amp. It should have some buttons and dials. One of them will say "gain" or "level". Adjust that according to your HU's preout voltage. If you're not sure, most HUs are around 4v, older ones were 2v, and newer ones are up to 8v. |
Platinum Member Username: Glasswolf
Wisteria,
Lane
USA
Post Number: 11704
Registered: Dec-03
|
| Posted on Monday, March 26, 2007 - 06:20 pm: |
|
3 threads for the same damned problem you culd have fixed yourself by RTFM?
lovely. |
Silver Member Username: Djbeanpole
Naptown,
Indiana
USA
Post Number: 356
Registered: Nov-05
|
| Posted on Monday, March 26, 2007 - 06:21 pm: |
|
Is this the original post? |
|
