| Author |
Thread: 2xcerwin vega... which amp??? |
    
New member Username: Mattyj33
Liverpool
UK
Post Number: 6
Registered: Sep-06
|
| Posted on Sunday, March 18, 2007 - 08:37 am: |
|
I have 2 x Cerwin Vega 124 rated at 400RMS each (800 Peak) and need an amp to power them. I was thinking the Cerwin Vega EXL 1000D. Is this to powerfull for the speakers seeing how the rating is 1 x 1000 @ 2ohms? If so what would you recommend?
Thanks |
|
|
|
Bronze Member Username: Jeromebaker
Post Number: 88
Registered: Dec-05
|
| Posted on Sunday, March 18, 2007 - 02:54 pm: |
|
MAn I haven't seen any CV's in like 10 years.
Damn good subs, even the ones they made out of paper. I don't know about their amps. |
Silver Member Username: Sheriff
Post Number: 143
Registered: Jan-07
|
| Posted on Sunday, March 18, 2007 - 03:21 pm: |
|
Kicker 06ZX850.2 if you have the money. |
Gold Member Username: 420alldaylong
Post Number: 1061
Registered: Sep-06
|
| Posted on Sunday, March 18, 2007 - 05:04 pm: |
|
Matthew Jones
How much do you want to spend on a amp? |
New member Username: Mattyj33
Liverpool
UK
Post Number: 7
Registered: Sep-06
|
| Posted on Monday, March 19, 2007 - 09:16 am: |
|
I am looking to spend about £200($300). I had a look at the kicker amp. How would i wire it up to my head unit which has 3 pre outs, 2 going to my 4 channel amp and 1 spare, the sub out. Would i connect the sub out to the amp and still bridge it? |
Gold Member Username: Juliob
Santo Domingo
Dominican Re...
Post Number: 4285
Registered: Dec-05
|
| Posted on Monday, March 19, 2007 - 02:48 pm: |
|
i heard their amps are good. Try them if you want man. If you need 1k at 2 ohms, buy kicker zx 750.1 if you're not sure. |
New member Username: Mattyj33
Liverpool
UK
Post Number: 8
Registered: Sep-06
|
| Posted on Tuesday, March 20, 2007 - 05:58 pm: |
|
so basically anything with around 800wrms at 2ohms and a lower feq will do the job? |
Gold Member Username: Juliob
Santo Domingo
Dominican Re...
Post Number: 4294
Registered: Dec-05
|
| Posted on Wednesday, March 21, 2007 - 09:42 pm: |
|
basically yeah if they're DVC 2 ohm.
If they're DVC 4 ohm then look for 800w rms at 1 ohm |
|
