| Author |
Thread: Power to head |
    
Silver Member Username: Homegrowncam
Funky Town,
TX
United States
Post Number: 364
Registered: Jan-05
|
| Posted on Tuesday, December 26, 2006 - 04:48 pm: |
|
so i had posted last week about how my head unit wasnt working though I had all the wires correctly wired. Well had some time today and ripped it apart and realized that the power coming from the cars harness to the head units harness did have any power. so i just connected it to the power side of my 4channel amp and the head worked. now i cant just connect the power from the head to that because the head will be on all the time. is there any other way to rig this? |
|
|
|
Silver Member Username: Homegrowncam
Funky Town,
TX
United States
Post Number: 367
Registered: Jan-05
|
| Posted on Tuesday, December 26, 2006 - 05:26 pm: |
|
bump |
Silver Member Username: Homegrowncam
Funky Town,
TX
United States
Post Number: 368
Registered: Jan-05
|
| Posted on Tuesday, December 26, 2006 - 10:59 pm: |
|
any suggestions on getting power to my head unit? |
Gold Member Username: Leew
XXXX!!WWWW,
Yokosuka, ...
YAKUDZA JAP...
Post Number: 1169
Registered: Jan-06
|
| Posted on Wednesday, December 27, 2006 - 09:00 am: |
|
The ignition lock could be your problem.Because the blue wire(acc wire) going from ignition to the fuse number 9(10Amp) and then coming to the hu...You have to check that fuse if it's get any power from the lock!!! (check it with ignition "ON")
BTW, You need a DMM for that.
or you have to make a new power line (just two wire,one for constant +12,the other one ACC aka switched) |
Silver Member Username: Homegrowncam
Funky Town,
TX
United States
Post Number: 370
Registered: Jan-05
|
| Posted on Wednesday, December 27, 2006 - 11:17 am: |
|
if i had a dmm how owuld i even check it? |
Bronze Member Username: Jesse59672
OK
Post Number: 67
Registered: Feb-07
|
| Posted on Friday, March 02, 2007 - 12:08 am: |
|
get a tester and test all of the power wires that plug into the deck. also you could have undid your ground or something it could be alot of things. check your fuses and stuff and if you still dont know go to your local audio store and tell them to fix it lol. say youll give them 5 bucks |
New member Username: Kendee587
Lynchburg,
VA
USA
Post Number: 1
Registered: Mar-07
|
| Posted on Monday, March 12, 2007 - 08:59 pm: |
|
Need HELP !!! Insignia NS-C5111, Faceplate buttons stay illuminated all the time, even with ign. switch off. With Ign. sw. on the unit will not power on. Does any one know which components control the power on-off functions on the circuit board? If the yellow input wire is disconnected the buttons extenguish. There is definitely a bad component. |
|
