| Author |
Thread: Wiring help |
    
Silver Member Username: Homegrowncam
Funky Town,
TX
United States
Post Number: 338
Registered: Jan-05
|
| Posted on Wednesday, December 20, 2006 - 12:21 pm: |
|
Alright so I have an Alpine 9856. I installed it myself last January. When I installed it I hooked up all the wires with electrical tape. Well 2 nights ago I was at a buddys house and he had a set of Inifinity 6.1s laying around that we decieded to install. Doing so we switched RCAs in the baack of the head and the electircal tape slipped off and wires were exposed. The head unit wouldnt turn on so I just put it all back and decided to work on it this morning. My thing is I have checked wires and made sure all are connected accordingly and connected them with those wire connectors where you slide the stripped wires in and then twist the cap. Now it still isnt turning on and I was wanting to know what to look for? ANy help at all is apreciated. |
|
|
|
Gold Member Username: Tjmutlow
Post Number: 3383
Registered: Sep-05
|
| Posted on Wednesday, December 20, 2006 - 12:56 pm: |
|
need to see if your getting power at the constant and switched wires, use a test light, or see if you blew the fuse in the fuse panel. |
Silver Member Username: Homegrowncam
Funky Town,
TX
United States
Post Number: 340
Registered: Jan-05
|
| Posted on Wednesday, December 20, 2006 - 05:03 pm: |
|
So i am not getting power from my power wire and no fuses are blown. |
Gold Member Username: Tjmutlow
Post Number: 3394
Registered: Sep-05
|
| Posted on Wednesday, December 20, 2006 - 05:09 pm: |
|
fuse cannstill be blown and not able to be seen, you really need a test light or something to test them, they should have power on 2 sides of the fuse. |
Gold Member Username: Tjmutlow
Post Number: 3395
Registered: Sep-05
|
| Posted on Wednesday, December 20, 2006 - 05:09 pm: |
|
or you have another fuse box under the hood |
Silver Member Username: Homegrowncam
Funky Town,
TX
United States
Post Number: 341
Registered: Jan-05
|
| Posted on Wednesday, December 20, 2006 - 05:28 pm: |
|
i checked the fuse box under the hood and all the same. |
Gold Member Username: Leew
XXXX!!WWWW,
Yokosuka, ...
YAKUDZA JAP...
Post Number: 1143
Registered: Jan-06
|
| Posted on Wednesday, December 20, 2006 - 06:25 pm: |
|
if your car is Nissan Altima 1997,then could be this sh!t:
somehow you connected ACC wire to the RR (+) speaker,cause it's the same color,also +12 is the same color as LR (+) speaker!!! So, check this out:
-----------------------------------------
Check all connections with DMM or a light bulb |
New member Username: Smrts82
Post Number: 5
Registered: Dec-06
|
| Posted on Wednesday, December 20, 2006 - 06:35 pm: |
|
I need help finding a power source for a dvd player and 2 monitors in a 2004 suburban. I plan on leaving the factory stereo alone. Can someone help please? |
Bronze Member Username: King33
Post Number: 18
Registered: Nov-06
|
| Posted on Wednesday, December 20, 2006 - 07:07 pm: |
|
You probably otta start a new thread under a different toppic or you may not get any help.... I dont know anything about it. |
Silver Member Username: Homegrowncam
Funky Town,
TX
United States
Post Number: 342
Registered: Jan-05
|
| Posted on Wednesday, December 20, 2006 - 07:40 pm: |
|
no i onnected the powering right becuase i have a separate amp powering my speakers. the power is conected properly just not getting anything from it. |
New member Username: Swampthang
Post Number: 1
Registered: Dec-06
|
| Posted on Wednesday, December 20, 2006 - 08:06 pm: |
|
i need a wireing diagram or the color code for a 1989 f150 the previous owner cut up the wireing harness for the radio so i need to know what wire gose where
thanks
jason |
Silver Member Username: Homegrowncam
Funky Town,
TX
United States
Post Number: 344
Registered: Jan-05
|
| Posted on Wednesday, December 20, 2006 - 08:27 pm: |
|
bump |
Silver Member Username: Homegrowncam
Funky Town,
TX
United States
Post Number: 356
Registered: Jan-05
|
| Posted on Thursday, December 21, 2006 - 03:13 pm: |
|
any other suggestion. before i knew my power wire coming off the harness had power because i would touch it to my anntenna wire and teh antenna would rise but now it does nothing. |
Gold Member Username: Tjmutlow
Post Number: 3411
Registered: Sep-05
|
| Posted on Thursday, December 21, 2006 - 03:24 pm: |
|
did you use a test light on all the fuses, it really sounds like a fuse issue, due to the switched power is not working |
Silver Member Username: Homegrowncam
Funky Town,
TX
United States
Post Number: 366
Registered: Jan-05
|
| Posted on Tuesday, December 26, 2006 - 05:13 pm: |
|
i started a new thread about it
http://forum.ecoustics.com/bbs/messages/4/306771.html |
Silver Member Username: Homegrowncam
Funky Town,
TX
United States
Post Number: 369
Registered: Jan-05
|
| Posted on Wednesday, December 27, 2006 - 05:27 am: |
|
anybody? its lonely without a radio. |
Silver Member Username: Arande2
400dB could probably d...,
4000 isnt ev...
100,000dB FU...
Post Number: 384
Registered: Dec-06
|
| Posted on Wednesday, December 27, 2006 - 05:31 am: |
|
Agh I know the feeling. I wouldn't know though. |
New member Username: Billfl1
Post Number: 1
Registered: Mar-07
|
| Posted on Thursday, March 01, 2007 - 04:57 pm: |
|
Good afternoon!!! can anyone tell me how to obtain a wiring diagram for a 2000 ford windstar LX. I'm trying to install an after market radio. tks.. |
New member Username: Foodlion01
Post Number: 1
Registered: Mar-07
|
| Posted on Sunday, March 04, 2007 - 04:59 pm: |
|
i need a wiring diagram fo a 1990 blazer 1500 for a durabrand cd player |
New member Username: Strandman
Carlsbad,
Ca
Us
Post Number: 1
Registered: Mar-07
|
| Posted on Wednesday, March 07, 2007 - 03:45 pm: |
|
i need the radio wiring color codes for a 1989 ford clubwagon. please help! |
