| Author |
Thread: Archive through August 03, 2006 |
    
Bronze Member Username: Skater_bum
Milwaukee,
Wisconsin
USA
Post Number: 15
Registered: Mar-06
|
| Posted on Tuesday, April 25, 2006 - 08:37 pm: |
|
Concept 600 installation guide:
http://www.directeddealers.com/manuals/ig/clifford/concept600_install.pdf |
|
|
|
New member Username: Silentnoise713
US
Post Number: 1
Registered: Apr-06
|
| Posted on Wednesday, April 26, 2006 - 04:37 pm: |
|
Hi. Can you please provide the installation guide for Clifford Intelliguard 750 and Intellistart 4 to silentnoise713@yahoo.com. I am somewhat new to alarms so this would help greatly! I would like to get a copy of the Clifford Wizard Pro also.
TIA!
Bobby |
Bronze Member Username: Skater_bum
Milwaukee,
Wisconsin
USA
Post Number: 16
Registered: Mar-06
|
| Posted on Wednesday, April 26, 2006 - 07:14 pm: |
|
Bobby W, check your mail.
And for those of you who are looking for the CliffNet Wizard Pro, here's a link:
http://beta.yousendit.com/transfer.php?action=download&ufid=F4D7467A2244DAD6 |
New member Username: Silentnoise713
US
Post Number: 2
Registered: Apr-06
|
| Posted on Wednesday, April 26, 2006 - 10:39 pm: |
|
Got it. Thanks! |
New member Username: Raaja
Post Number: 1
Registered: Apr-06
|
| Posted on Thursday, April 27, 2006 - 05:11 pm: |
|
hi guys,I am after all installation info for a clifford matrix rs 3.5
please email to rajlobban@yahoo.com
thanks |
Bronze Member Username: Skater_bum
Milwaukee,
Wisconsin
USA
Post Number: 17
Registered: Mar-06
|
| Posted on Thursday, April 27, 2006 - 07:11 pm: |
|
Raj Lobban, check your mail.
As for anyone else looking for the Clifford Matrix RSX 3.5 installation guide, here's a link:
http://www.directeddealers.com/manuals/ig/clifford/N919564_07-05.pdf |
New member Username: Loum0411
Sherbrooke,
Quebec
Canada
Post Number: 1
Registered: May-06
|
| Posted on Tuesday, May 02, 2006 - 01:02 pm: |
|
Could you please send me the installation guide for the concept 40.
Thanks!
loum0411@hotmail.com |
Bronze Member Username: Skater_bum
Milwaukee,
Wisconsin
USA
Post Number: 21
Registered: Mar-06
|
| Posted on Tuesday, May 02, 2006 - 08:13 pm: |
|
Martin, check your mail. |
New member Username: Cossiedoc
Post Number: 1
Registered: Apr-06
|
| Posted on Wednesday, May 03, 2006 - 04:53 pm: |
|
anyone got cliffnet wizard pro v2.20 cheers bigboybundy@hotmail.com |
New member Username: Nickc
Surbiton,
SURREY
UK
Post Number: 1
Registered: May-06
|
| Posted on Friday, May 12, 2006 - 06:56 am: |
|
Hi am also looking for cliffnet pro v2.20. a link would be great
regards
nick |
Bronze Member Username: Skater_bum
Milwaukee,
Wisconsin
USA
Post Number: 24
Registered: Mar-06
|
| Posted on Friday, May 12, 2006 - 07:39 pm: |
|
GET YOUR COPY OF CLIFFNET WIZARD PRO VERSION 2.20 HERE TODAY!!!!
http://download.yousendit.com/98A267061531C751 |
New member Username: Nickc
Surbiton,
SURREY
UK
Post Number: 2
Registered: May-06
|
| Posted on Saturday, May 13, 2006 - 05:01 am: |
|
Thats great thanx. luv this site already ;-) |
New member Username: Miyagi4q
Post Number: 2
Registered: May-06
|
| Posted on Wednesday, May 17, 2006 - 09:30 pm: |
|
clifford g5 650 installation guide needed anybody help?? |
New member Username: Marlonesq
Post Number: 4
Registered: May-06
|
| Posted on Wednesday, May 17, 2006 - 09:59 pm: |
|
I have the Clifford Matrix 3.5 and I cant get it off of Silent Mode. When I ARM and DISARM its silent. when I press and hold the ARM button and engage the PANIC it doesn't sound either. Can some one assist me in making the Siren sound again. Thanks. |
Bronze Member Username: Skater_bum
Milwaukee,
Wisconsin
USA
Post Number: 25
Registered: Mar-06
|
| Posted on Wednesday, May 17, 2006 - 10:23 pm: |
|
zahid iqbal,
what's your email address?
Marlon Esq,
Your siren should activate during PANIC reguardless of silent mode. Hence the term "Panic." Your siren driver is probably defective. |
Bronze Member Username: Sweepdoggy
Post Number: 17
Registered: Mar-06
|
| Posted on Wednesday, May 17, 2006 - 10:35 pm: |
|
i need that diagram as well, g5 650 if any 1 can help, skater bum plz |
New member Username: Marlonesq
Post Number: 5
Registered: May-06
|
| Posted on Wednesday, May 17, 2006 - 11:40 pm: |
|
Ok, I figured that. Thanks. I will take it to the DEALER where I installed it then. Thanks again ! |
New member Username: Cossiedoc
Post Number: 2
Registered: Apr-06
|
| Posted on Thursday, May 18, 2006 - 03:15 am: |
|
i have concept 650 install guide. put post with email and i will send cossiedoc. |
New member Username: Sparkse17
London
Uk
Post Number: 4
Registered: Mar-06
|
| Posted on Thursday, May 18, 2006 - 04:20 am: |
|
Cossiedoc please can you send me a copy of the 650 install guide
my email is ian.lawrence13@ntlworld.com
many thanks
|
Bronze Member Username: Sweepdoggy
Post Number: 18
Registered: Mar-06
|
| Posted on Thursday, May 18, 2006 - 08:46 am: |
|
can you send me the diagram for the 650, cheers thx, send it to sweepdoggy@hotmail.com |
New member Username: Miyagi4q
Post Number: 5
Registered: May-06
|
| Posted on Thursday, May 18, 2006 - 02:52 pm: |
|
You alrite mate SKATER BURN my email address is miyagi944@hotmail.com if you or anyone else can help me get hold of a CLIFFORD G5 650 ALARM installation guide????
appreciate it |
Bronze Member Username: Skater_bum
Milwaukee,
Wisconsin
USA
Post Number: 26
Registered: Mar-06
|
| Posted on Saturday, May 20, 2006 - 12:23 am: |
|
Actually it's S K A T E R B U M.
By the way, zahid iqbal, Scott adams and Ian Lawrence, you've all got mail! |
New member Username: Miyagi4q
Post Number: 6
Registered: May-06
|
| Posted on Sunday, May 21, 2006 - 09:16 pm: |
|
Nice 1 skaterbum your a star got the guide thanks mate. |
New member Username: Fizz
Post Number: 1
Registered: May-06
|
| Posted on Sunday, May 28, 2006 - 05:12 am: |
|
I desperatly need a copy of version 2.2 of the Pro Installer anyone help? and a copy of the clifford 650 install guide would be handy..
skater bum?
|
New member Username: Miniman12
Post Number: 2
Registered: May-06
|
| Posted on Monday, May 29, 2006 - 12:57 pm: |
|
Could you send me the 650 installation manual as well please? Been looking for it for a while now!
steventate12@hotmail.com
Thanks |
New member Username: Zerobug3000
Post Number: 1
Registered: May-06
|
| Posted on Monday, May 29, 2006 - 01:30 pm: |
|
could some one please send copy of 650 install guide to zerobug3000
@hotmail.com |
New member Username: Leon1111
Post Number: 2
Registered: May-06
|
| Posted on Tuesday, May 30, 2006 - 11:52 am: |
|
could some one please send me a copy of clifford concept 650 install guide with wiring diagram??? desparatly needed, thanks a lot in advance, much appreciated. mike - leon111@hotmail.co.uk |
Bronze Member Username: Skater_bum
Milwaukee,
Wisconsin
USA
Post Number: 29
Registered: Mar-06
|
| Posted on Tuesday, May 30, 2006 - 04:03 pm: |
|
Darren Hughes, cooper steve, jason gould, and mike hrbac,
I will send you the information you need once I get home from work today! |
Bronze Member Username: Skater_bum
Milwaukee,
Wisconsin
USA
Post Number: 30
Registered: Mar-06
|
| Posted on Tuesday, May 30, 2006 - 09:13 pm: |
|
cooper steve, jason gould, and mike hrbac, you've got mail! As for Darren Hughes, I need your email address. |
New member Username: Fizz
Post Number: 2
Registered: May-06
|
| Posted on Wednesday, May 31, 2006 - 02:55 am: |
|
Sorry mate... darren.hughes@blueyonder.co.uk |
New member Username: Internets
Post Number: 1
Registered: May-06
|
| Posted on Wednesday, May 31, 2006 - 02:58 am: |
|
Skater Bum, any chance of a copy of Cliffnet Wizard Pro 2.2 ? Many Thanks |
New member Username: Internets
Post Number: 2
Registered: May-06
|
| Posted on Wednesday, May 31, 2006 - 03:03 am: |
|
Skater Bum, my email addy is internets_99ATyahoo.co.uk Thanks |
Bronze Member Username: Skater_bum
Milwaukee,
Wisconsin
USA
Post Number: 31
Registered: Mar-06
|
| Posted on Wednesday, May 31, 2006 - 10:35 pm: |
|
Darren Hughes and paul smith,
My email is down so I sent the files via www.yousendit.com. |
New member Username: Internets
Post Number: 3
Registered: May-06
|
| Posted on Thursday, June 01, 2006 - 03:52 am: |
|
Skater Bum, thanks for that |
New member Username: Fizz
Post Number: 3
Registered: May-06
|
| Posted on Thursday, June 01, 2006 - 12:24 pm: |
|
I only got the installation PDF not the Cliffnet Wizard Pro 2.2? |
Bronze Member Username: Skater_bum
Milwaukee,
Wisconsin
USA
Post Number: 32
Registered: Mar-06
|
| Posted on Friday, June 02, 2006 - 01:23 am: |
|
Oops, sorry Darren Hughes, I had two requests for it and forgot to CC you on the email. Check your mail, you should have it now. |
New member Username: Mke
Post Number: 1
Registered: Jun-06
|
| Posted on Friday, June 02, 2006 - 09:44 am: |
|
Cliffnet Wizard Pro please?
netmike1@Hotmail.com |
Bronze Member Username: Skater_bum
Milwaukee,
Wisconsin
USA
Post Number: 33
Registered: Mar-06
|
| Posted on Friday, June 02, 2006 - 08:47 pm: |
|
michael, check your mail. |
New member Username: Mikey007
Post Number: 1
Registered: Jun-06
|
| Posted on Monday, June 05, 2006 - 07:29 am: |
|
any chance of Cliffnet wizard Pro Please?
mike_0402@yahoo.com |
New member Username: Cossiedoc
Post Number: 3
Registered: Apr-06
|
| Posted on Tuesday, June 06, 2006 - 04:25 am: |
|
ANY CHANCE OF INSTALLGUIDE FOR CONCEPT 50 UK CHEERS COSSIEDOC |
Bronze Member Username: Skater_bum
Milwaukee,
Wisconsin
USA
Post Number: 34
Registered: Mar-06
|
| Posted on Tuesday, June 06, 2006 - 11:32 pm: |
|
Concept 50UK, I've got wiring information but no email address to send it to, stephen bundy! |
New member Username: Cossiedoc
Post Number: 4
Registered: Apr-06
|
| Posted on Thursday, June 08, 2006 - 02:03 am: |
|
to skaterbum sorry bigboybundy@hotmail.com cheers have you got full install manual cheers steve for clifford concept 50 uk |
New member Username: C20let
Post Number: 1
Registered: Jun-06
|
| Posted on Thursday, June 08, 2006 - 12:40 pm: |
|
Can i have a copy of the Clifford Concept 50 wiring diagram aswell plz!! t4ylor@gmail.com |
Bronze Member Username: Skater_bum
Milwaukee,
Wisconsin
USA
Post Number: 36
Registered: Mar-06
|
| Posted on Thursday, June 08, 2006 - 09:17 pm: |
|
stephen bundy and Mark Taylor, you've got mail!
Since the Concept 50UK is such an old model, the only support that I have for it is the wiring diagram and the owner's manual. |
New member Username: Rubens_gielow
Indaial,
Santa Catarina
Brazil
Post Number: 1
Registered: Jun-06
|
| Posted on Saturday, June 10, 2006 - 06:00 am: |
|
Hi, is installing a Cifford Matrix RS3.5 in Mitsubishi Pajero 2800 and it would like a diagram for installation. Here in Brazil it is difficult to get technical information. Does some installation manual exist in Portuguese from Brazil?
Thank you
rubensgielow@terra.com.br
|
Bronze Member Username: Skater_bum
Milwaukee,
Wisconsin
USA
Post Number: 37
Registered: Mar-06
|
| Posted on Saturday, June 10, 2006 - 09:43 pm: |
|
Rubens Eduardo Gielow, you've got mail! |
New member Username: Rubens_gielow
Indaial,
Santa Catarina
Brazil
Post Number: 2
Registered: Jun-06
|
| Posted on Tuesday, June 13, 2006 - 08:15 pm: |
|
Thank you very much, with that material I should be capable to apply the equipment like him it deserves. |
New member Username: Cossiedoc
Post Number: 5
Registered: Apr-06
|
| Posted on Wednesday, June 14, 2006 - 04:47 am: |
|
to skaterbum have you got installer manual for concept 50 i thouhgt it was 50x but not cheers bigboybundy@hotmail.com |
New member Username: Kin6
Post Number: 1
Registered: Jun-06
|
| Posted on Wednesday, June 14, 2006 - 09:15 am: |
|
could someone please send me a wiring diagram for the g4 concept 500 many thanks
daffythking@hotmail.com |
New member Username: Project_e30
Post Number: 1
Registered: Jun-06
|
| Posted on Thursday, June 15, 2006 - 05:42 am: |
|
Please could someone send me an installation diagram and user manual for a Clifford Concept 500.
Bobbaxtor@hotmail.com |
New member Username: Rossylee
Post Number: 1
Registered: Jun-06
|
| Posted on Thursday, June 15, 2006 - 03:15 pm: |
|
Hi
Anyone got a wiring diagram of a clifford Concept 40?
If so can they please email me at rossylee01@yahoo.co.uk
Many thanks in advance |
Bronze Member Username: Skater_bum
Milwaukee,
Wisconsin
USA
Post Number: 38
Registered: Mar-06
|
| Posted on Friday, June 16, 2006 - 04:24 pm: |
|
Rossy Lee, you've got mail! |
New member Username: Rossylee
Post Number: 2
Registered: Jun-06
|
| Posted on Friday, June 16, 2006 - 05:59 pm: |
|
Excellent stuff
Much appreciated |
New member Username: Rossylee
Post Number: 3
Registered: Jun-06
|
| Posted on Saturday, June 17, 2006 - 05:18 pm: |
|
I did not get the valet code with my alarm. Have tried the default code but that does not work. Is there any way to recode the ecu back to factory code. Or do i need to send the unit into clifford. Any help on this would be greatly appreciated.
Oh yeah its a concept 40
Cheers |
New member Username: Compaq19772
Liverpool
Uk
Post Number: 4
Registered: Jun-06
|
| Posted on Tuesday, June 20, 2006 - 05:35 am: |
|
hello as eny 1 got a wiring diagram for a clifford g5 550 across74@hotmail.com |
New member Username: Jimjam
Post Number: 1
Registered: Jun-06
|
| Posted on Tuesday, June 20, 2006 - 06:13 pm: |
|
Hi just wondering if there is any chance i could get the Cliffnet Wizard Pro 2.2
Many thanks
jj |
New member Username: 83_blazer
Post Number: 1
Registered: Jun-06
|
| Posted on Tuesday, June 20, 2006 - 08:44 pm: |
|
Anyone got a wiring diagram for a Concept 20. Any help would be appreciated. |
Bronze Member Username: Skater_bum
Milwaukee,
Wisconsin
USA
Post Number: 39
Registered: Mar-06
|
| Posted on Tuesday, June 20, 2006 - 10:11 pm: |
|
Rossy Lee - The default code is 2. If the code has been changed and you don't know it, you'll need to send it to Clifford to be reset.
andrew cross - You've got mail!
janjosko and Rick Dawson - I'll need your email addresses if I am going to send you the information you requested.
My email address is: skaterbum@skaterbum.com |
New member Username: Compaq19772
Liverpool
Uk
Post Number: 5
Registered: Jun-06
|
| Posted on Wednesday, June 21, 2006 - 05:20 am: |
|
thanx for that skater bum |
New member Username: Jimjam
Post Number: 2
Registered: Jun-06
|
| Posted on Friday, June 30, 2006 - 05:52 am: |
|
Cheers got it now..
many thanks. |
Bronze Member Username: Skater_bum
Milwaukee,
Wisconsin
USA
Post Number: 43
Registered: Mar-06
|
| Posted on Wednesday, July 05, 2006 - 07:49 pm: |
|
Due to popular demand, here's another 7-day link to the CliffNet Wizard Pro Version 2.20:
http://www.yousendit.com/transfer.php?action=download&ufid=0D01075868104322 |
New member Username: Sahar01
Post Number: 1
Registered: Jul-06
|
| Posted on Wednesday, July 05, 2006 - 10:22 pm: |
|
I need help with the Clifford Matrix RS3 Programming. We had to disable the alarm because I dropped the remote and it fell out of programming. We're trying to re-program it (standard configuration) but I must be missing something.
We turned the car to ON, then pressed the Valet button once and it chirped once. Then we pressed the buttons on the remote but nothing happens! HELP! |
Bronze Member Username: Skater_bum
Milwaukee,
Wisconsin
USA
Post Number: 44
Registered: Mar-06
|
| Posted on Friday, July 07, 2006 - 12:06 am: |
|
Sahar Higgs,
Here's a link to the installation guide for the Matrix RS3:
http://www.directeddealers.com/manuals/ig/clifford/N909554_2-03.pdf
On page 30 and 31, it walks you through the transmitter learning process. There is more to it than what you described.
Simply put: Open a door, turn the key on, push the valet switch 9 times HOLDING ON THE 9TH PUSH, the system will chirp 8 times and the LED will flash, while CONTINUING TO HOLD the valet switch, press the arm/disarm button on the remote, the system will chirp, release the valet switch and turn the key off. |
New member Username: Blacknblue
Tulsa,
OK
Post Number: 1
Registered: Jul-06
|
| Posted on Friday, July 07, 2006 - 11:54 am: |
|
Thanks for the link Skater Bum!!!!
I have a similar issue with the IG8000,,, it is a used system, and I am trying to get into the programming mode, but I only have the unit on my bench until I can verify functionality. I have tried all things I can think of, but I cannot get it to enter programming. So far, I have only tried turning key on, enter pin code, then hold the * for 10 seconds. I see on the RS3 system, you mentioned opening a door,,, do I need to open and close a door sensor as well before it will let me in to program it? I ordered my Cliffnet cable, but I don't have it just yet, but I may have to wait for it to get here... Thanks in advance for any assistance! |
Bronze Member Username: Skater_bum
Milwaukee,
Wisconsin
USA
Post Number: 46
Registered: Mar-06
|
| Posted on Monday, July 10, 2006 - 01:01 am: |
|
Kenneth Leake,
No, you do not have to open a door with the IG8000. Since the unit is used, the previous owner might have changed the valet code from the default. If this is the case, then you WILL need the CliffNet cable inorder to program the system. |
New member Username: Blacknblue
Tulsa,
OK
Post Number: 2
Registered: Jul-06
|
| Posted on Saturday, July 15, 2006 - 01:20 am: |
|
Got my cable today, and you are right, the valet code had been changed.... Thanks again,,, looks like I will be installing this system tomorrow!!! |
New member Username: Ergman
Post Number: 1
Registered: Jul-06
|
| Posted on Saturday, July 15, 2006 - 02:27 am: |
|
Skater Bum,
Can I get added to the list for the Cliffnet Wizard Pro software. I will also check back dailey to see if you post the yousendit link. Thanks man.
Nosperated@hotmail.com
Anyone,
I am having some issues programming my smartwindows 4 to roll up upon arming the system. I can get it to Roll down when disarming the system. if anyone has some tricks or tips on programming the Smartwindows 4 and Intellistart 4 that would be awesome. |
Bronze Member Username: Skater_bum
Milwaukee,
Wisconsin
USA
Post Number: 50
Registered: Mar-06
|
| Posted on Saturday, July 15, 2006 - 02:05 pm: |
|
Ricky Grasso,
Did you program the Smartwindows 4 with the windows down or up? You have to start with them in the down position first. Here's a link to the installation guide for the Smartwindows 4:
http://www.directeddealers.com/manuals/ig/clifford/N903010_10-05.pdf
AND FOR ALL OF YOU LOOKING FOR CLIFFNET WIZARD PRO VERSION 2.20, HERE'S A 7-DAY LINK:
http://www.yousendit.com/transfer.php?action=download&ufid=7A3152D604A1CCF1 |
New member Username: Thewishmaster
Post Number: 3
Registered: Jul-06
|
| Posted on Saturday, July 15, 2006 - 03:24 pm: |
|
Skater Bum You,re my hero (I hope)
Can you please sent me a wiring diagram/install manual for a clifford avantguard 5 and the wizard pro version.............
To GTI_FREAK@hotmail.com
Thanx allready mischa b |
New member Username: Ergman
Post Number: 2
Registered: Jul-06
|
| Posted on Sunday, July 16, 2006 - 04:15 pm: |
|
Thanks Skater Bum. I am all over it.
Ricky |
New member Username: Thewishmaster
Post Number: 4
Registered: Jul-06
|
| Posted on Monday, July 17, 2006 - 11:36 am: |
|
HHmm got the cliffnet wizard pro version from the download..
But now I can,t install it...
It says it,s not a ms-dos or windows application
Did I do something wrong???
I,ve got a laptop with windows xp home edition..
greets mischa b |
New member Username: Ergman
Post Number: 3
Registered: Jul-06
|
| Posted on Monday, July 17, 2006 - 01:49 pm: |
|
When PK unzip opens try unzipping it to a directory on the desktop and then manually running the shell.exe from that folder. I also believe XP Pro is required but don't quote me on that as I am not 100% sure. |
New member Username: Thewishmaster
Post Number: 5
Registered: Jul-06
|
| Posted on Monday, July 17, 2006 - 02:18 pm: |
|
I,ve tryed it allready and that also won,t help..
Is it maybe because it,s a dutch xp home edition???
PLEASE HELP ME OUT.......
Greets mischa b |
New member Username: Blacknblue
Tulsa,
OK
Post Number: 3
Registered: Jul-06
|
| Posted on Monday, July 17, 2006 - 05:06 pm: |
|
Skater Bum, thanks for all of your help so far... I installed my IG8000 system over the weekend and all is working great, but I do have a couple of questions you may be able to answer better than my local dealer.
1. I have the dual zone proximity sensor, but does the main unit have any tilt or shock sensor in it? I have read that it does, but wanted to know for sure.
2. What is the difference in the proximity, omni, peizo and radar sensors, and is one better than the others?
3. Should my local dealer transfer a warranty into my name? They said they wouldn't because the IG8000 isn't sold any more, but if it has a lifetime warranty, I would think they should? He even said that if he had sold it to me in the first place, that he couldn't honor it because clifford is now owned by DEI..
Thanks in advance for your help, so far I love this system! |
New member Username: Cajoeter
The Netherlands
Post Number: 2
Registered: Jul-06
|
| Posted on Monday, July 17, 2006 - 05:59 pm: |
|
Can anyone tell me how to get an Avantguard 4 in installer programming mode? I need to set the idle RPM for the Intellistart.
Thanks for your help! |
New member Username: Ergman
Post Number: 4
Registered: Jul-06
|
| Posted on Monday, July 17, 2006 - 10:38 pm: |
|
Mischa Boomstra,
I have heard that XP Pro is a requirment. Don't quote me as I am not 100% sure. You may also want to try and unzip the package to a manually created folder on the desktop. Once the package has been unzipped run the Shell.exe manually. Give that a shot and I hope it helps.
Michel,
You need the Cliffnet Wizard Pro software. Skater Bum has posted a link you can download it from. The link can be found 8 posts above this one. Hurry I belive you only have a fe days left.
Ricky |
New member Username: Thewishmaster
Post Number: 6
Registered: Jul-06
|
| Posted on Tuesday, July 18, 2006 - 01:20 am: |
|
"Quote" Mischa Boomstra,
I have heard that XP Pro is a requirment. Don't quote me as I am not 100% sure. You may also want to try and unzip the package to a manually created folder on the desktop. Once the package has been unzipped run the Shell.exe manually. Give that a shot and I hope it helps. "Quote"
@Ricky Grasso
I think that that,s the problem that I don,t have the xp pro version but the home edition 
I allready try the manual way but even that won,t help
Greets mischa b |
New member Username: Blacknblue
Tulsa,
OK
Post Number: 6
Registered: Jul-06
|
| Posted on Wednesday, July 19, 2006 - 05:55 pm: |
|
Is there a part of the installation books that have door trigger/parking light hookups? My manual says I can set up my IG8000 to remind me if I leave my lights on, but I can't find any information on how to hook it up?
Thanks! |
New member Username: Phil1983
Post Number: 2
Registered: Jul-06
|
| Posted on Thursday, July 20, 2006 - 09:11 am: |
|
has any1 got a diagram 4 clifford concept 300 pls?????
e-mail phillip_eames@hotmail.co.uk thanks |
New member Username: Millenium_falcon
Post Number: 1
Registered: Jul-06
|
| Posted on Thursday, July 20, 2006 - 02:20 pm: |
|
Hello,
I'm in great need of an Installation guide or at least a wiring diagram for a Clifford Bullet II. Please click on my User Name to send me a copy. Thanks a bunch!
R |
New member Username: Millenium_falcon
Post Number: 2
Registered: Jul-06
|
| Posted on Thursday, July 20, 2006 - 02:38 pm: |
|
never mind the User Name, please send the copy of the Bullet II installation/wiring diagrams to:
ledno r1032 @aol.com
just remove the spaces.
Thanks again. |
Bronze Member Username: Skater_bum
Milwaukee,
Wisconsin
USA
Post Number: 51
Registered: Mar-06
|
| Posted on Saturday, July 22, 2006 - 07:01 pm: |
|
OK, I'M BACK FROM MY WEEK-LONG VACATION AND YOU GUYS FLOODED MY EMAIL BOX! BUT HERE GOES:
mischa boomstra, check your email! CliffNet Wizard Pro should work on Win95, 98, 98SE, ME, 2000, XP Pro and XP Home. Here's a link to the CliffNet Wizard Pro Version 2.20:
http://www.yousendit.com/transfer.php?action=download&ufid=1A0A0094103FD472
black-n-blue, 1. Your system only has a dual zone proximity sensor with it. You can add a digital tilt sensor or a Omni sensor but they are optional units that do not come with the unit. 2. The differences in sensors are: proxity is an invisible field that protects your car using radar. Omni sensor is a digital shock sensor. Peizo is a mechanical shock sensor and, radar sensor is basically the same as the proximity sensor. The best ones to have are the dual zone proximty and omni sensors. 3. As for the warranty, you're kinda screwed. Since Clifford got bought out by DEI, they only bought Clifford's assets and not the liabilty. They will, however, upgrade you to a new unit if you give them your old system and about $75 - $100 at their disgression. I just upgraded my friend's Avantguard 4 to an Avantguard 5 and it cost me the AG4 unit and $120. 4. As for the door trigger and parking lights what do you need to know? The parking light reminder should be automatic. What happens is when you turn the engine off and the parking lights are still on, the siren will chirp once to let you know that you left them on, that's it.
Michel, here's a link to the installation guide for the Avantguard 4:
http://www.directeddealers.com/manuals/ig/clifford/avantguard4_install.pdf
phil eames, Here's a link to the Concept 300 Holland: http://www.directeddealers.com/manuals/ig/clifford/concept300hol_install.pdf
Han Solo, check your email! |
New member Username: Phil1983
Southampton,
Hampshire
England
Post Number: 5
Registered: Jul-06
|
| Posted on Sunday, July 23, 2006 - 08:08 am: |
|
thanks skater bum, hopefully ur b able 2help out wiv anything else i need, u shud have mail  |
New member Username: Zac
London,
Enfield
England
Post Number: 1
Registered: Apr-06
|
| Posted on Saturday, July 29, 2006 - 12:44 pm: |
|
hello,can anyone help am after installation guide for clifford arrow 2.thanx |
Bronze Member Username: Skater_bum
Milwaukee,
Wisconsin
USA
Post Number: 52
Registered: Mar-06
|
| Posted on Saturday, July 29, 2006 - 01:12 pm: |
|
Zac daho,
I have the information that you need, but I need your email address in order to send it to you. |
New member Username: Troy65
Post Number: 2
Registered: Jul-06
|
| Posted on Sunday, July 30, 2006 - 09:17 pm: |
|
hi,
I'm new to this board. I just bought a 1995 Toyota 4Runner and it came with a Clifford alarm system. The previous owner did not have any information on it and he gave me 2 battery operated fobs. I don't even know the model number.
What can I do to find out what the model number is? I eventually want to be able to use the valet feature, but I don't know where to start.
Any help would be great.
Thanks,
Troy |
Bronze Member Username: Skater_bum
Milwaukee,
Wisconsin
USA
Post Number: 53
Registered: Mar-06
|
| Posted on Monday, July 31, 2006 - 03:01 pm: |
|
Troy, start by crawling under the driver's side of the dash. You are looking for a black plastic box roughly about 5" square. It should look out of place and have a bunch of wires coming out of the sides of it. The model number should be molded into the plastic or painted on the top of the unit. Once you have the model number/name I can help you out further. |
New member Username: Troy65
Post Number: 3
Registered: Jul-06
|
| Posted on Monday, July 31, 2006 - 03:34 pm: |
|
That's awesome! Thanks so much for replying. I'll look where you've asked me and then get back to you. |
New member Username: Troy65
Post Number: 4
Registered: Jul-06
|
| Posted on Monday, July 31, 2006 - 08:02 pm: |
|
Skater Bum, I just emailed you with a pic of the Clifford alarm that is installed in my 95 4Runner.
I'm hoping that I can get a manual for the alarm and some pointers on how to get more fobs with the code. I'm hoping that the previous owner left the default code intact.
Thanks, Troy
Here's what I have:
MODEL: Clifford, Polaris 2 with a magnetic resonance sensor
NUMBERS: PQC6020H5DC 60-077-G
AX 2255DC 50-077
03635 03636
 |
New member Username: Troy65
Post Number: 5
Registered: Jul-06
|
| Posted on Monday, July 31, 2006 - 08:08 pm: |
|
Here are some more pics of the Clifford Polaris II:
  |
Bronze Member Username: Skater_bum
Milwaukee,
Wisconsin
USA
Post Number: 54
Registered: Mar-06
|
| Posted on Wednesday, August 02, 2006 - 12:35 am: |
|
Troy C, I've got the wiring diagram for the Polaris II but that's all I can find. It's such an old unit you're probably better off replacing the whole system.
zac daho, did I ever send you that information for the Arrow II? |
New member Username: Troy65
Post Number: 7
Registered: Jul-06
|
| Posted on Wednesday, August 02, 2006 - 01:18 am: |
|
Thanks Skater Bum. If I take it to an installer to have them replace the unit, will they need to take everything out, or can they just "pop" a new unit in place of the old one, leaving all the wires intact?
Also, could you email me the wiring diagram to:
troy65@shaw.ca
Thanks,
Troy |
New member Username: Debx
Post Number: 1
Registered: Aug-06
|
| Posted on Wednesday, August 02, 2006 - 02:50 am: |
|
Hi,
if can any help mee to finding an wiring guid for my Clifford Intellistart (the old one).
I looking also for an link who i can donload the CliffNet Wizard Pro Version 2.20.
Many Thanks.
Kind regards
DX |
New member Username: Blacknblue
Tulsa,
OK
Post Number: 7
Registered: Jul-06
|
| Posted on Wednesday, August 02, 2006 - 09:45 am: |
|
Thanks Skaterbum,,, I noticed once in a while it chirped when I turn the key off, but wasn't exactly sure why as it only did it once or twice... Now that you mention this, it was at night and I was probably reaching for the lights at the same time I was turning it off.
I have a peizo sensor I haven't hooked up yet, but could use, and another unmarked radar type sensor. I'm thinking of buying a dual zone peizo or omni sensor to add instead of the single zone peizo that I have. I don't think I need the second radar type sensor as I finally have my proximity working perfectly.
I'll probably run with this system till it dies as I'm pretty happy with it, but it's good to know they should upgrade me for little money. I am assuming the IG 850 would be the best replacement if I did go that route.... Thanks again for all of your help!!! |
New member Username: Lucy
Post Number: 1
Registered: Aug-06
|
| Posted on Wednesday, August 02, 2006 - 04:22 pm: |
|
Hi i have a concept300 clifford alarm and for some reason today when i locked my car the chirps were quieter than usual can anyone help me please!! |
Bronze Member Username: Skater_bum
Milwaukee,
Wisconsin
USA
Post Number: 55
Registered: Mar-06
|
| Posted on Wednesday, August 02, 2006 - 11:49 pm: |
|
Lucy Palmer, this could be one of two things.
1. Your siren has water damage or
2. Your alarm system is telling you that your remote control batteries are getting low. Check your Owner's Manual to be sure.
If your siren starts chriping normally in the next couple of days, it's more than likely the first problem. If it continues to remain quiet, try replacing the battery in your remote control and see if that takes care of the problem. |
Bronze Member Username: Skater_bum
Milwaukee,
Wisconsin
USA
Post Number: 59
Registered: Mar-06
|
| Posted on Thursday, August 03, 2006 - 12:14 am: |
|
M.,
I need your email address so I can send the wiring diagram for the Intellistart. As for the CliffNet Wizard Pro Version 2.20, here's a link:
http://www.yousendit.com/transfer.php?action=download&ufid=FAEB51640CE763A7 |
New member Username: Debx
Post Number: 2
Registered: Aug-06
|
| Posted on Thursday, August 03, 2006 - 09:00 am: |
|
Hi Skater Bum,
thank you verry much. Heres my email addi.
msalafeem@hotmail.com
Kind reagrds
DX |
New member Username: Debx
Post Number: 3
Registered: Aug-06
|
| Posted on Thursday, August 03, 2006 - 09:04 am: |
|
@Skater Bum,
i forgotn, that i bought also the user manual, so how i programm it the Intellistart. I have use the Intellistart before 5 Years and i remember that i must tip 3 times with the white wire on the chasis ground...more i have forgotn. |
New member Username: Troy65
Post Number: 8
Registered: Jul-06
|
| Posted on Thursday, August 03, 2006 - 09:19 am: |
|
Skater Bum,
Thanks for sending the wiring diagrams of the Clifford Polaris II to me.
Question: I would like to disconnect the trigger for the doors. Can I just cut the wire or disconnect it from the computer?
TIA, Troy |
