| Author |
Thread: Archive through April 25, 2006 |
    
sean12345678 Unregistered guest |
| Posted on Thursday, November 17, 2005 - 03:37 am: |
|
Could you please send me the installation guide for the concept 100.
sean.of.to@gmail.com |
|
|
|
New member Username: Outrage_uk
Post Number: 1
Registered: Nov-05
|
| Posted on Friday, November 18, 2005 - 07:48 pm: |
|
Hello. I really need a copy of Cliffnet Wizard Pro (for G5 systems). If you have it, please, please, please e-mail me a copy of it. Thanks. Rick.
outrage_uk@hotmail.com |
Unregistered guest |
| Posted on Saturday, November 19, 2005 - 10:29 am: |
|
I NEED A COPY TOO.
VBAROUTES@HOTMAIL.COM |
Unregistered guest |
| Posted on Saturday, November 19, 2005 - 12:30 pm: |
|
I need a wiring diagram for a Clifford Matrix 3.5 digital89@yahoo.com |
|
| Posted on Tuesday, November 22, 2005 - 02:05 pm: |
|
hi guys,I am after all fitting info for a clifford matrix rs 3.5
please email to magneato26@hotmail.com
thanks |
New member Username: Vr6rallye
Post Number: 1
Registered: Nov-05
|
| Posted on Tuesday, November 22, 2005 - 02:08 pm: |
|
hi guys,I am after all fitting info for a clifford matrix rs 3.5
please email to magneato26@hotmail.com
thanks |
escalade123 Unregistered guest |
| Posted on Monday, November 28, 2005 - 05:11 pm: |
|
could someone please send me a copy of the pro installer? ubzcrowbar@yahoo.com |
Unregistered guest |
| Posted on Monday, November 28, 2005 - 05:36 pm: |
|
Hi guys,
I'm looking for the wiring diagram of the clifford arrow 3.
Cliffnet Wizard Pro would also be nice.
Thanks in advance
Remco_v@hotmail.com |
Unregistered guest |
| Posted on Tuesday, November 29, 2005 - 05:56 am: |
|
hey do anyone have, wiring diagram for Clifford Smart Remote Starter 3 ?
please send it to orix_xior@hotmail.com |
moe7777777 Unregistered guest |
| Posted on Wednesday, December 07, 2005 - 11:26 pm: |
|
im looking for concept 100 wiering diagrams please email me the link to or post here
immanuel__7 at hotmail.com |
New member Username: Etkinget
Post Number: 1
Registered: Dec-05
|
| Posted on Thursday, December 08, 2005 - 01:34 am: |
|
i need one for a matrix rs1.1 |
Silver Member Username: Ps1k0
Post Number: 245
Registered: Aug-04
|
| Posted on Thursday, December 08, 2005 - 02:03 am: |
|
links to install diagrams
remmie1973
http://www.directechs.com/guides/manuals/ig/clifford/arrow3_install.pdf
viddi
I don't have one for that model.
moe7777777
http://www.directechs.com/guides/manuals/ig/clifford/concept100_install.pdf
dawit woldeyohanes
http://www.directechs.com/guides/manuals/ig/clifford/N909429.pdf
ALSO
I am including a link to Clifford Wizard Pro
http://www.megaupload.com/?d=5CGUMGIL |
Remmie1973 Unregistered guest |
| Posted on Thursday, December 08, 2005 - 09:15 am: |
|
Thanks Ps1k0,
I already have that manual, i'm looking for a more advanced manual.
Getting the pro version now.....
Thanks again |
Unregistered guest |
| Posted on Monday, December 12, 2005 - 02:02 pm: |
|
ps1ko, cheers for the wizard pro link, ideal.
anyone got a wiring diagram for a concept 500?
Ez Bon |
Unregistered guest |
| Posted on Monday, December 12, 2005 - 03:57 pm: |
|
hi i just got a car.. but i dont no what type of alarm i have .. their two numbers on the alarm 60482 039774 their a switch in the car three way you can turn it back middle forward.. help how can i find what alarm it is
hope you can
cheers
matt |
Unregistered guest |
| Posted on Monday, December 12, 2005 - 03:57 pm: |
|
hi i just got a car.. but i dont no what type of alarm i have .. their two numbers on the alarm 60482 039774 their a switch in the car three way you can turn it back middle forward.. help how can i find what alarm it is
hope you can
cheers
matt |
Unregistered guest |
| Posted on Thursday, December 15, 2005 - 12:11 am: |
|
I hate to be a retard, but I too need a diagram or even a picture of the clifford G4 series car alarm w/ remote start. I ripped it out of my cousins car, and Im not sure if i grabbed it all Thanks for the assist. |
Unregistered guest |
| Posted on Friday, December 16, 2005 - 12:06 pm: |
|
hello i need to get a copy of a clifford concept 650 wiring diagram if any one can help please |
Unregistered guest |
| Posted on Saturday, December 17, 2005 - 01:40 pm: |
|
Bonney_GTI and shaggy41,
I checked DEI's tech site and I can find the owner's manuals for the Concept 500 and 650 but for some reason they are not posting the installation manuals for them. The closest that I could find is the Concept 550 and 600. If you two want those, I could send them to you.
Viddi,
Check your email, I'm sending you the wiring information for the Smart Remote Start III.
|
|
| Posted on Saturday, December 17, 2005 - 11:52 pm: |
|
ty for the concept 100
if any one would hapen to have the instaltion for a viper alram v402007 050 thats all the # i could find on this one,
thanks in andvance
moe7777777
|
Unregistered guest |
| Posted on Monday, December 26, 2005 - 07:49 pm: |
|
This is to Skater Bum. Am also looking for wiring/install manual for Clifford Smart Remote Starter III. Seems you have it and sent to Viddi.
Haven't used this site before so will include eAddress. ULCElectronics@earthlink.net or
BLaVeau@earthlink.net
Thnx, Bruce L [Anything you need ?] |
Unregistered guest |
| Posted on Sunday, January 01, 2006 - 11:32 am: |
|
Hi
Can any one help me in getting an Clifford Concept 650 User guide as the Proximity Sensor’s primary zone need to be retuned correctly. Please email me back on Jelavia@hotmail.com.
Thanks
|
|
| Posted on Tuesday, January 03, 2006 - 08:58 am: |
|
yes please
r0b85@hotmail.co.uk |
New member Username: Kevz
Post Number: 2
Registered: Jan-06
|
| Posted on Thursday, January 05, 2006 - 02:32 pm: |
|
kevz@hotmail.com
Thanks |
|
| Posted on Tuesday, January 10, 2006 - 01:59 pm: |
|
Hi,
Anyone know how to program a replacement remote for an old Clifford Super IPS alarm? If so, please reply to jsarge@flowcardia.com.
THANK YOU! |
littleaznkid Unregistered guest |
| Posted on Thursday, January 12, 2006 - 12:49 am: |
|
Hi could i have the manual of Clifford Bullet II or 2 =D Thank-You! |
Unregistered guest |
| Posted on Wednesday, January 18, 2006 - 06:44 pm: |
|
Hi. HELP!!Can anyone please help me out with a Clifford Concept 600 / 600UK Wiring Diagram!? Would be much appreciated.Keep up the good work everyone! THANKS.
anton55@btinternet.com |
mark.chard Unregistered guest |
| Posted on Thursday, January 19, 2006 - 12:51 pm: |
|
mark.chard2@btopenworld.com
cheers mate |
Quadchuck Unregistered guest |
| Posted on Thursday, January 19, 2006 - 07:31 pm: |
|
I bought a 2000 Dakota with a Clifford Intelliguard 6000. Not working, anybody have a wiring diagram so I can find the problem?
quadchuck@comcast.net Thanks |
Unregistered guest |
| Posted on Sunday, January 22, 2006 - 08:33 pm: |
|
Viddi!!!
Is it possible that you can mail me the wiring diagram for a Concept 600?? as I need some help.
Much Appreciated if you can.
Thanks
anton55@btinternet.com |
Unregistered guest |
| Posted on Sunday, January 22, 2006 - 08:57 pm: |
|
Vinnie Samra, VeeTwin and Quadchuck, you all have mail. If you need more Clifford information, email me. |
Unregistered guest |
| Posted on Sunday, January 22, 2006 - 09:17 pm: |
|
littleaznkid,
I have the installation diagram for the Bullet II but you didn't post your email address. |
Unregistered guest |
| Posted on Monday, January 23, 2006 - 12:56 pm: |
|
I would really appreciate a copy of the clifford pro wiring diagram I have a clifford XL500 with no diagram |
|
| Posted on Friday, January 27, 2006 - 11:05 am: |
|
hi, is it possible to have a copy of the wiring diagram for the clifford concept 650. thanks
curran3001@ntlworld.com |
Unregistered guest |
| Posted on Monday, January 30, 2006 - 12:56 pm: |
|
Oh sorry skaterbum. i forgot to put it. Its clarenceie@gmail.com Thanks!!! |
Unregistered guest |
| Posted on Monday, January 30, 2006 - 08:15 pm: |
|
realshow and littleaznkid, you've both got mail! |
New member Username: Dcevilone999
Post Number: 1
Registered: Feb-06
|
| Posted on Thursday, February 02, 2006 - 07:19 pm: |
|
clifford pro installer version please wedelsanger@aol.cm thanks |
New member Username: Dcevilone999
Post Number: 2
Registered: Feb-06
|
| Posted on Thursday, February 02, 2006 - 07:20 pm: |
|
clifford pro installer version please wedelsanger@aol.com thanks |
New member Username: Dcevilone999
Post Number: 3
Registered: Feb-06
|
| Posted on Thursday, February 02, 2006 - 07:50 pm: |
|
clifford pro please wedelsanger@aol.com thanks |
Unregistered guest |
| Posted on Monday, February 06, 2006 - 02:46 pm: |
|
hey,
could someone point me in the direction of a wiring diagram for a clifford concept 40? or the "clifford pro" software?
Any help appreciated
cheers
nath |
Unregistered guest |
| Posted on Wednesday, February 08, 2006 - 06:05 pm: |
|
Hi All, got a New G5 Concept 650 (UK). Please could someone help me get the CliffNet Wizard Pro Installer Version with Serial no???????? I got proximity sensor issues!!! Thanks very much all. filmbuff333@aol.com
|
Unregistered guest |
| Posted on Thursday, February 09, 2006 - 06:03 am: |
|
I am looking for the install guide for the Clifford 650. I am trying to link it up to my boot release and dont know which wire to connect. Also the clifford install grid info. Any help will be great.
Thanks in advance
the_j_foundation-clifford@yahoo.co.uk |
|
| Posted on Friday, February 10, 2006 - 05:42 am: |
|
could someone please email me the install guide for a clifford matrix rsx 3.5 and clifford matrix 10.5
email: truevietluv636@yahoo.com |
Unregistered guest |
| Posted on Friday, February 10, 2006 - 12:36 pm: |
|
i need a installation guide wiring diagram for a concept 300 clifford please email me |
Unregistered guest |
| Posted on Friday, February 10, 2006 - 12:36 pm: |
|
i need a installation guide wiring diagram for a concept 300 clifford please email me |
CLIFFORD INSTALLER Unregistered guest |
| Posted on Friday, February 10, 2006 - 04:04 pm: |
|
truevietluv636@yahoo.com and eddie.thomas, you've both got mail!
...And for those of you who are looking for the CLIFFNET WIZARD PRO VERSION 2.2 (the windows based program used with a special cable to program your Clifford system) is available here but only for 7 days.
Follow this link = http://s52.yousendit.com/d.aspx?id=10CMZ6IU0NTKY23ZQQQYQR6CJN |
Unregistered guest |
| Posted on Friday, February 17, 2006 - 02:48 pm: |
|
hi all
i need your help badly
i have a matrix remote start alarm posibly version 2 not sure maybe version 1. i need the wiring diagram urgently. does an nice kind person on here have one or access to one, i need to find a negative feed to put to a pager system. not sure if it has one or not. any help would be greatly appreciated. thanks jay |
Unregistered guest |
| Posted on Saturday, February 18, 2006 - 10:25 pm: |
|
i need a programming guide for a clifford g4 7000
i need to program double pulse unlock
|
maxima_on_21s Unregistered guest |
| Posted on Saturday, February 18, 2006 - 10:28 pm: |
|
e-mail at cutlas_on_22s@yahoo.com |
New member Username: Greenbeast
Post Number: 1
Registered: Feb-06
|
| Posted on Wednesday, February 22, 2006 - 04:28 pm: |
|
can someone send me the clifford wizard pro?
n_pitney@hotmail.com |
Unregistered guest |
| Posted on Wednesday, February 22, 2006 - 09:42 pm: |
|
Yea im looking for arrow 5 install guide, any help?? skatesoccerpro14@aol.com , thanks |
Unregistered guest |
| Posted on Saturday, February 25, 2006 - 04:53 pm: |
|
maxima_on_21s, Nickolas Pitney and ZacharyPope, you've all got mail! |
CLIFFORD INSTALLER Unregistered guest |
| Posted on Saturday, February 25, 2006 - 04:56 pm: |
|
For those of you who are looking for the CLIFFNET WIZARD PRO VERSION 2.2 (the windows based program used with a special cable to program your Clifford system) is available here but only for 7 days.
Follow this link = http://s49.yousendit.com/d.aspx?id=3D78H9JNL8BVF07YRCU1MKBWLD |
New member Username: Greenbeast
Post Number: 2
Registered: Feb-06
|
| Posted on Saturday, February 25, 2006 - 05:00 pm: |
|
thanks skaterbum and clifford installer
very handy |
Unregistered guest |
| Posted on Monday, February 27, 2006 - 12:42 am: |
|
I'm having trouble... i have an older Clifford Cyber 1 Alarm, i'd like to install it into my car, but have no diagram/pin-out for the alarm unit. Can someone help me out? email: ephyew@gmail.com |
Unregistered guest |
| Posted on Tuesday, February 28, 2006 - 04:53 am: |
|
please please please can some1 send me the install guide 4 a concept 50. just been given it for FREE and discovered you cant get install guides anywhere... exept here!!!!!!!!!!! cheers randombloke99@hotmail.com |
New member Username: Hoppy1
Post Number: 1
Registered: Mar-06
|
| Posted on Thursday, March 02, 2006 - 04:18 pm: |
|
Hi has any one got the wiring diagram for the concept 500 if so please could you send me a copy Ps also the installation guide
Thanks Pete |
projectvti Unregistered guest |
| Posted on Friday, March 03, 2006 - 04:58 pm: |
|
Hi,
Could really do with some help! Ive found the installation guide to my concept 600, (it was previously fitted to another car and professionally removed). Im planning to fit it to my new car, same make and model as my old one. Im confident with the instructions I have, but I have 2 small grey areas and was wondering if i could get some help.
[b]First question is....[/b]
There are 2 brown wires on the 14 pin connector, what are these used for? Not mentioned in any of the material i have found. Pin numbers are 1 and 3. Maybe something to do with the next question? (im assuming its not)
[b]Second question....[/b]
With the headlight wiring, it had the function to keep your headlights on for 10 seconds with the press of a button. Now, from the diagram, I seem to be missing 2 of the wires needed (the thick black ones). Instead theres a relay, with numbers 30, 85, 86, 87 and 87a. Nothing unusual about the relay, and i think ive figure out how it works. Does this diagram make sense?
http://img.photobucket.com/albums/v518/projectvti/Relay12.jpg
All i know is that 85 definately goes to the alarm, and that 86 and 87 are connected.
Can anyone help? I cant install without figuring this out so would really appreciate some help!
Many thanks in advance!!
|
StevengsND Unregistered guest |
| Posted on Friday, March 03, 2006 - 09:46 pm: |
|
Trying to install a Clifford Matrix rs3.5.
can tou email that Clifford pro installer version
to stevens at anyconnect.com
|
Unregistered guest |
| Posted on Saturday, March 04, 2006 - 11:41 am: |
|
eph, Paul999999999, peter hopkin and StevengsND, you've all got mail. As for projectvti, the brown wires are generally used for parking lights. The diagram that I have for the Concept 600 doesn't show them being in the connector. It might just be a basic connector that they use for multiple units. Be sure to meter them first before hooking them to anything.
As for the diagram, you've got it right. Pins 86 and 87 go to +12V constant, pin 85 goes to the grey/blue wire of the alarm and pin 30 goes to your headlights.
If you need more information, let me know. |
projectvti Unregistered guest |
| Posted on Saturday, March 04, 2006 - 06:27 pm: |
|
Thanks Skater! I was recently advised that the brown wires would be for the idicators, one for each side. Would this make sense? There doesnt seem to be any other wires going to them.
Also, i was looking at a concept 300 installation guide and think i remember the brown wires being used for the indicators. But i will definately meter them before i connect them up, thanks for that tip! Would probably have just connected them up and hoped for the best!
Thanks again for your help! Think im finally feeling confident enough to install the whole thing!! |
Unregistered guest |
| Posted on Sunday, March 05, 2006 - 11:48 am: |
|
projectvti,
Yes, it does make sense. There are usually two brown wires, one for left and one for right, that are diode isolated. If you only have one wire for the indicators, you can just put both of the brown wires together. If you have any more questions, let me know.
|
Unregistered guest |
| Posted on Sunday, March 05, 2006 - 12:29 pm: |
|
Hi, does anyone know if the RX3.5 works with manual transmission cars, and can you advise on where to get one fitted...thanks email-the1theonly002@hotmail.com |
Unregistered guest |
| Posted on Sunday, March 05, 2006 - 12:30 pm: |
|
Hi, does anyone know if the RX3.5 works with manual transmission cars, and can you advise on where to get one fitted...thanks email- the1theonly002@hotmail.com |
New member Username: Greenbeast
Post Number: 3
Registered: Feb-06
|
| Posted on Sunday, March 05, 2006 - 12:43 pm: |
|
the only thing which would matter whether it was manual or not is the remote start yes?
if so then yes it will work as i have a concept 600 with remote start on a manual car
|
Unregistered guest |
| Posted on Tuesday, March 07, 2006 - 08:04 pm: |
|
Actually, the Concept 600 is a G4 series Clifford and the Matrix RSX3.5 is a G5 series Clifford. The G4 series were designed for automatic and manual cars, the G5 series were not. In the installation guide for the RSX3.5 it states :
"IMPORTANT! This product is designed for fuel-injected, automatic transmission vehicles only.
Installing it in a standard transmission vehicle is dangerous and is contrary to its intended use."
It does not have any safty features like the G4 series did. In order to remote start a stick car you had to go through a sequence to enable the "manual transmission SafeStart" mode. The RSX3.5 doesn't have this option.
It is possible to install the RSX3.5 on a manual tranmission car but it will not prevent you from remote starting it in gear. You could hook it up so you have to engage the parking brake inorder to remote start it but if you leave it in gear, it may still lung forward before it stalls. (And, that is, IF you have a good working parking brake.)
You might have trouble finding a place to install it because it is not designed for a manual transmission.
|
Unregistered guest |
| Posted on Tuesday, March 07, 2006 - 08:10 pm: |
|
Actually, the Concept 600 is a G4 series Clifford and the Matrix RSX3.5 is a G5 series Clifford. The G4 series was designed for automatic and manual cars, the G5 series was not. In the installation guide for the RSX3.5 it states :
"IMPORTANT! This product is designed for fuel-injected, automatic transmission vehicles only.
Installing it in a standard transmission vehicle is dangerous and is contrary to its intended use."
It does not have any safety features like the G4 series did. In order to remote start a stick car you had to go through a sequence to enable the "manual transmission SafeStart" mode. The RSX3.5 doesn't have this feature.
It is possible to install the RSX3.5 on a manual tranmission car but it will not prevent you from remote starting it in gear. You could hook it up so you have to engage the parking brake inorder to remote start it but if you leave it in gear, it may still lung forward before it stalls. (And, that is, IF you have a good working parking brake.)
You might have trouble finding a place to install it because it is not designed for a manual transmission.
|
New member Username: Bash
Post Number: 1
Registered: Mar-06
|
| Posted on Wednesday, March 08, 2006 - 05:26 pm: |
|
Any ideas were i could get the RSX3.5 intstalled into my car? in or around London |
New member Username: Ricky_3dr
Post Number: 1
Registered: Mar-06
|
| Posted on Thursday, March 09, 2006 - 12:28 pm: |
|
I have just printed the instructions for my Arrow 3 ;)
Much appreciated |
New member Username: Markthespark
United kingdom
Post Number: 1
Registered: Mar-06
|
| Posted on Thursday, March 09, 2006 - 12:58 pm: |
|
anyone got cliffnet wizard pro installer please couldyou send a copy mmilburn1@btinternet.com |
New member Username: James7467
Post Number: 1
Registered: Mar-06
|
| Posted on Friday, March 10, 2006 - 03:02 am: |
|
I'm looking for the Clifford pro installer for a matrix rsx3.5 anyone got one. Send it my way thanks.
james7467@msn.com |
New member Username: Xsouljahx
Post Number: 3
Registered: Mar-06
|
| Posted on Saturday, March 11, 2006 - 01:19 am: |
|
i have a clifford matrix rsx 3.5. The one with 4 buttons.
Does anyone know how to turn on the lcd for the back light
on the remote? mine doesnt turn on anymore. thanks.
Please email me:
lbdeocampoiii@gmail.com |
New member Username: Philter74
Post Number: 1
Registered: Mar-06
|
| Posted on Sunday, March 12, 2006 - 12:59 am: |
|
Anyone know if there is a Clifford Alarm / Remote Start that has an auxillary input (either positive or negative) that will initiate the remote start? Thanks. |
New member Username: Sweepdoggy
Post Number: 2
Registered: Mar-06
|
| Posted on Sunday, March 12, 2006 - 04:38 pm: |
|
hi can i get a copy at
sweepdoggy@hotmail.com |
New member Username: Twelvoltz
Post Number: 1
Registered: Apr-05
|
| Posted on Monday, March 13, 2006 - 03:42 pm: |
|
If this is the wiring diagrams for clifford automotive alarms, I would love to obtain a copy! Twelvolt@hotmail.com
Thank You!!! |
New member Username: Skater_bum
Milwaukee,
Wisconsin
USA
Post Number: 1
Registered: Mar-06
|
| Posted on Wednesday, March 15, 2006 - 01:53 am: |
|
Bashaar - Sorry, can't help you there. I live in the USA.
mark milburn - You've got mail!
James Pemberton and Scott adams - If you are looking for the Cliffnet Wizard Pro Version 2.20, here's a link to it:
http://s43.yousendit.com/d.aspx?id=2MDYQGZ78VL7F0IRGXHB8KX6K
jon - Press the Program button on the back of the remote or hold the four remote control buttons on the front of the remote simultaneously until one long beep is heard. Programming Mode has now been entered. Use the unlock button to toggle selections between LCD backlight illumination On/Off.
william trotter - The Clifford Matrix RSX 3.5 has a white/blue auxillary input wire that is used to trigger the remote start with a negative pulse. There may be more units that offer this feature but that was the first one to cross my mind.
Steve Murphy - There is no program that has all of the Clifford alarm diagrams other than the DEI Dealers website itself. If you need a specific diagram, let me know.
Ah, my work here is done!
|
New member Username: Twelvoltz
Post Number: 2
Registered: Apr-05
|
| Posted on Wednesday, March 15, 2006 - 07:29 am: |
|
Thank You!!!!! |
New member Username: Markthespark
United kingdom
Post Number: 2
Registered: Mar-06
|
| Posted on Wednesday, March 15, 2006 - 06:17 pm: |
|
thanks for cliffnet wizard Skater Bum |
New member Username: Edfocus
Post Number: 1
Registered: Mar-06
|
| Posted on Tuesday, March 21, 2006 - 01:59 pm: |
|
Hi Could someone please send me a copy of Clifford pro installer software for the G5 Concept 650
Thanks
Ed
|
New member Username: Sparkse17
London
Uk
Post Number: 1
Registered: Mar-06
|
| Posted on Friday, March 24, 2006 - 08:37 am: |
|
Im looking for installers set up menu / wiring diagram for the clifford concept 650
also looking for the installers version of cliffnet pro for g5 please email to ian.lawrence13@ntlworld.com |
New member Username: Skater_bum
Milwaukee,
Wisconsin
USA
Post Number: 2
Registered: Mar-06
|
| Posted on Saturday, March 25, 2006 - 11:41 am: |
|
Here's a link to the CliffNet Wizard Pro Version 2.20
http://s45.yousendit.com/d.aspx?id=01XRFS2F9CA8A0UPF5722PRNZ
Once again, the link will expire 7 days from this posting. |
New member Username: Sparkse17
London
Uk
Post Number: 2
Registered: Mar-06
|
| Posted on Saturday, March 25, 2006 - 05:30 pm: |
|
Thanks for the for the wiring diagram and cliffnet wizard pro link skater bum but sorry they dont help me out have compared the user set up with my 650 one and it is different.
have a copy of cliffnet wizars pro but cant seem to get into installer menu anyone got any clues on this |
New member Username: Skater_bum
Milwaukee,
Wisconsin
USA
Post Number: 3
Registered: Mar-06
|
| Posted on Sunday, March 26, 2006 - 12:20 pm: |
|
Ian Lawrence, I checked their site and all I can find on the Concept 650 is the owner's manual. For some reason they don't have the installation manual available for download. Do you have the owner's manual? If not, I could send it to you. The 650 might be a UK only product but I'm not sure. |
New member Username: Skydi
Post Number: 1
Registered: Mar-06
|
| Posted on Monday, March 27, 2006 - 06:02 am: |
|
Hi can anyone send me an installation guide for a clifford G5 concept 650 alarm system with proximity sensors & total closure Many Thanks |
New member Username: Sparkse17
London
Uk
Post Number: 3
Registered: Mar-06
|
| Posted on Monday, March 27, 2006 - 06:22 am: |
|
skater bum many thanks i have sorted the problem (whitch was the timers on acessory outputs a and b) with the ciffnet wizard pro you sent me many thanks yes i do have th owners manual but would still be nice to get the install guide at some time |
New member Username: Skater_bum
Milwaukee,
Wisconsin
USA
Post Number: 4
Registered: Mar-06
|
| Posted on Monday, March 27, 2006 - 10:22 pm: |
|
For those of you who are looking for the installation guide for the Concept 650, I found out that its a UK only piece and that's why I have been having trouble locating it on the web site. I've got a friend on the inside checking on it for me and I should have the guide shortly. |
New member Username: Flagger
Post Number: 1
Registered: Apr-06
|
| Posted on Sunday, April 02, 2006 - 07:40 pm: |
|
I would really appreciate a copy of cliffnet wizard pro. Please e-mail:
david.flagg@sanofi-aventis.com
Thanks! |
New member Username: Comearunnin
Post Number: 1
Registered: Apr-06
|
| Posted on Friday, April 14, 2006 - 11:10 am: |
|
Could i also have a copy of this great software mines for a concept 350(uk) many thanks email me at waynekoston@hotmail.com with a copy |
Bronze Member Username: Skater_bum
Milwaukee,
Wisconsin
USA
Post Number: 11
Registered: Mar-06
|
| Posted on Saturday, April 15, 2006 - 10:26 pm: |
|
GET YOUR COPY OF CLIFFNET WIZARD PRO VERSION 2.20 HERE TODAY!!!!
http://beta.yousendit.com/transfer.php?action=download&ufid=45A24C5E3C8C5AD7 |
New member Username: Stemaddog
Liverpool,
Merseyside
Uk
Post Number: 1
Registered: Apr-06
|
| Posted on Sunday, April 23, 2006 - 06:43 am: |
|
Hi anyone got the wiring instructions for the blackjax on the concept 650 it wasn't wired when installed. Any other wiring instructions for it would be appreciated too. email me a themadsparky@aol.com
Anyone after cliffnet wizard can download it off the clifford website under G5 /wizard |
New member Username: Comearunnin
Post Number: 2
Registered: Apr-06
|
| Posted on Sunday, April 23, 2006 - 11:55 am: |
|
many thanks got it on and installed great to finally regain features i had previously lost through consumer version or valet switch only thing i need to reprogramme that i cant is the passive arming used to press two buttons on remote lights flashed four times and disabled the proximity sensor how do i set this any ideas would be apprieciated |
New member Username: Comearunnin
Post Number: 3
Registered: Apr-06
|
| Posted on Sunday, April 23, 2006 - 11:57 am: |
|
forgot to say on last post is clifford concept 300(uk) |
New member Username: Comearunnin
Post Number: 4
Registered: Apr-06
|
| Posted on Sunday, April 23, 2006 - 04:49 pm: |
|
many thanks to you steve (stemaddog) for your reply greatly apprieciated ONE more thing for users of this forum has anyone got a wiring diagram for the clifford concept 300(uk) as i have seen you can use accessory wire timed for headlight activation and i also need to see if i can find the smartwindows module if fitted.email me at waynekoston@hotmail.com |
New member Username: Matty_turbo
Coventry
United Kingdom
Post Number: 1
Registered: Apr-06
|
| Posted on Monday, April 24, 2006 - 05:06 pm: |
|
Can someone help me with an installation/wiring diagram for a Clifford concept 300 (thatcham)thanks |
New member Username: Matty_turbo
Coventry
United Kingdom
Post Number: 2
Registered: Apr-06
|
| Posted on Monday, April 24, 2006 - 05:12 pm: |
|
Can someone help me with an installation/wiring diagram for a Clifford concept 300 (thatcham)thanks minimatty_@hotmail.co.uk
|
Bronze Member Username: Skater_bum
Milwaukee,
Wisconsin
USA
Post Number: 13
Registered: Mar-06
|
| Posted on Monday, April 24, 2006 - 07:47 pm: |
|
The closest I can get to that is the Concept 300 Holand version here:
http://www.directeddealers.com/manuals/ig/clifford/concept300hol_install.pdf |
New member Username: Sweepdoggy
Post Number: 8
Registered: Mar-06
|
| Posted on Monday, April 24, 2006 - 08:42 pm: |
|
yeh i got a rough copy u can have mate, cheers |
New member Username: Comearunnin
Lincolnshire
United Kingdom
Post Number: 5
Registered: Apr-06
|
| Posted on Tuesday, April 25, 2006 - 02:25 pm: |
|
many thanks to you all great info should be a great help again all who helped THANKS |
New member Username: Sweepdoggy
Post Number: 9
Registered: Mar-06
|
| Posted on Tuesday, April 25, 2006 - 04:53 pm: |
|
if you need a copy of the diagram for the cocept 300 just msg me at sweepdoggy@hotmail.com |
New member Username: Pugracer285
Post Number: 1
Registered: Apr-06
|
| Posted on Tuesday, April 25, 2006 - 06:45 pm: |
|
Hi please may I have a copy of the Concept 600 wiring and installation guide. I have just been given one of these and need to work out what goes where!
james-lum@excite.com
Thanks james |
