| Author |
Thread: Set up advice needed! *Cross overs... |
    
Bronze Member Username: Mythy225719
Post Number: 73
Registered: Apr-06
|
| Posted on Tuesday, May 23, 2006 - 12:55 pm: |
|
Hi, I have a Pioneer 880 premier HU and a JL 500/1 amp... I am having
some trouble setting it up right and was wondering if you could help
me out...
I have a decent LPF on both my amp and HU... But which one should I
use? Or should I use both? When I have the Amps turned off and the
HU's to 200Hz I can hear voices coming out of my sub...
What Hz should I set the LPF to? Also which one should I use... My
decks (rear fill)are set to a HPF of 63 Hz, My doors are at 50Hz...
Thanks for your advice guys... |
|
|
|
Silver Member Username: Winn
Santa Ana,
California
US
Post Number: 128
Registered: Jun-05
|
| Posted on Wednesday, May 24, 2006 - 05:44 pm: |
|
Should use the LPF on the Amp.
LPF frequency settings on the amp is depended on what's kind of the sub and enclosure that you have. |
Bronze Member Username: Bobimpact
Danbury,
CT
US
Post Number: 25
Registered: May-06
|
| Posted on Thursday, June 01, 2006 - 08:54 am: |
|
Set the LPF on the amp to no more than 125Hz at the maximum. From there play around with it between 80-125 and see what sounds best. That will also allow you to pull your interior speakers up closer to 80 with a nice gentle rolloff (12dB/Octave or less) |
|
