| Author |
Thread: Connecting remote wire...... |
    
Silver Member Username: Thomas_g
NM
Post Number: 290
Registered: Oct-05
|
| Posted on Sunday, April 30, 2006 - 11:38 pm: |
|
Where on my HU do i connect my remote wire too?? Thanx. |
|
|
|
Gold Member Username: Theelfkeeper
Stockbridge,
GA
USA
Post Number: 1926
Registered: Feb-05
|
| Posted on Monday, May 01, 2006 - 07:09 am: |
|
if its aftermarket, there should be a blue wire from the back. make sure you don't mix up the REM output wire with the antenna wire, or your amps will only turn on when you turn on the radio, lol.
for a stock unit. you'll need to hook a wire in the fuse box and put a switch on it so you can turn the amps on and off via switch. there is no REM wire on a stock unit. |
Silver Member Username: Thomas_g
NM
Post Number: 316
Registered: Oct-05
|
| Posted on Tuesday, May 02, 2006 - 02:01 am: |
|
kool brandon u da man. |
Gold Member Username: Theelfkeeper
Stockbridge,
GA
USA
Post Number: 1955
Registered: Feb-05
|
| Posted on Tuesday, May 02, 2006 - 07:12 am: |
|
no problem |
Bronze Member Username: Silverado_94
Hudson bay,
Saskatchewan
Canada
Post Number: 14
Registered: May-06
|
| Posted on Thursday, May 04, 2006 - 01:38 am: |
|
or you can just find a spot that has power with the key on only and hook to there. itd be easier than the switch cause u might forget and leave the amp on.use a test light to find which one to use. |
Silver Member Username: Thomas_g
NM
Post Number: 367
Registered: Oct-05
|
| Posted on Thursday, May 04, 2006 - 05:30 pm: |
|
yup yup thanx everyone..... |
|
