| Author |
Thread: Archive through November 16, 2005 |
    
New member Username: Thegreatone
Post Number: 3
Registered: Sep-04
|
| Posted on Tuesday, November 02, 2004 - 01:01 pm: |
|
i have brought this off ebay and as i spent loads of time trying to find it on the net because i sure as hell wasnt paying a clifford installed 60£ an hour to do it,im offering it to any one that wants it free of charge just leave and email adress and ill send it |
|
|
|
Bronze Member Username: Ps1k0
Post Number: 28
Registered: Aug-04
|
| Posted on Thursday, November 04, 2004 - 01:04 am: |
|
sounds interesting. send a copy this way.
ri1212003@yahoo.com |
New member Username: Custom_sounds
BURY ST EDMUNDS ,
SUFFOLK
UNITED KINGDOM
Post Number: 1
Registered: Nov-04
|
| Posted on Sunday, November 07, 2004 - 08:04 am: |
|
I AM I NEED OF A WIRING DIAGRAM FOR A CLIFFORD XL-10 AND CAN'T SEEM TO GET HOLD OF ONE ANYWHERE! |
New member Username: Thegreatone
Post Number: 5
Registered: Sep-04
|
| Posted on Monday, November 08, 2004 - 07:41 am: |
|
http://s14.yousendit.com/d.aspx?id=72616D9DA2AB6BB141098DB46F96BC51
there we go for any one that wants it |
hondacrx Unregistered guest |
| Posted on Friday, December 03, 2004 - 12:39 pm: |
|
prelude_20032002@yahoo.com |
Unregistered guest |
| Posted on Wednesday, December 08, 2004 - 01:03 pm: |
|
Can someone help me with an installation/wiring diagram for a Clifford Bullet 4? I need it for a 94 Mustang. |
dbarkerjr Unregistered guest |
| Posted on Wednesday, December 08, 2004 - 01:05 pm: |
|
dbarkerjr@hotmail.com |
Unregistered guest |
| Posted on Thursday, December 09, 2004 - 06:52 pm: |
|
Im looking for a wiring diagram for a Clifford Matrix RS 3.5... Can anyone tell me where to get one at?? |
Unregistered guest |
| Posted on Monday, December 20, 2004 - 11:22 pm: |
|
sombody know where i can get wiring diagram to install remote starter for saturn sl1 2001 |
|
| Posted on Thursday, December 23, 2004 - 01:01 pm: |
|
LGBnitro@yahoo.com
Thanks. |
|
| Posted on Friday, December 24, 2004 - 07:44 am: |
|
The above address should read LGBnitro@yahoo.co.uk
Thanks. |
Devil666 Unregistered guest |
| Posted on Sunday, December 26, 2004 - 03:01 pm: |
|
Yea go for it thanks mate
adamstd@lycos.co.uk |
|
| Posted on Monday, December 27, 2004 - 09:04 pm: |
|
could you please send to xj4rocks a t excite.com
Thanks |
Unregistered guest |
| Posted on Wednesday, December 29, 2004 - 05:39 am: |
|
Can someone help me with an installation/wiring diagram for a Clifford concept 300 |
Unregistered guest |
| Posted on Friday, December 31, 2004 - 01:56 pm: |
|
dgregson69@hotmail.com thnks dude |
Unregistered guest |
| Posted on Wednesday, January 12, 2005 - 06:17 am: |
|
yes please |
Unregistered guest |
| Posted on Wednesday, January 12, 2005 - 06:17 am: |
|
yes please
lee99rich@hotmail.com |
Unregistered guest |
| Posted on Friday, January 14, 2005 - 07:52 pm: |
|
could you please send me the information? teh.pudding@gmail.com thanks! |
Unregistered guest |
| Posted on Friday, January 14, 2005 - 07:55 pm: |
|
could you please send me the information? teh.pudding@gmail.com thanks! |
Unregistered guest |
| Posted on Tuesday, January 18, 2005 - 10:20 am: |
|
can anyone please help with a clifford concept 650??? i have somehow disabled the proximity sensor and cant turn it back on. any info would be gratefully excepted (raylinlaw@ukonline.co.uk) |
Unregistered guest |
| Posted on Tuesday, January 18, 2005 - 10:21 am: |
|
can anyone please help with a clifford concept 650??? i have somehow disabled the proximity sensor and cant turn it back on. any info would be gratefully excepted raylinlaw@ukonline.co.uk |
Unregistered guest |
| Posted on Tuesday, January 25, 2005 - 08:09 pm: |
|
send it this way please barry@gccsystems.co.uk |
New member Username: Jong1
Post Number: 1
Registered: Jan-05
|
| Posted on Wednesday, January 26, 2005 - 04:10 am: |
|
Could you please send me a copy
jon.g1@btinternet.com |
Unregistered guest |
| Posted on Thursday, February 03, 2005 - 01:42 pm: |
|
could i please have a copy of this
marcell555@hotmail.com |
New member Username: S2turbo
Post Number: 1
Registered: Feb-05
|
| Posted on Friday, February 04, 2005 - 04:47 pm: |
|
could you send me a copy please
lee_summerill@hotmail.com |
New member Username: Y_u_revn
Post Number: 1
Registered: Feb-05
|
| Posted on Saturday, February 05, 2005 - 01:39 am: |
|
Can I have a copy of this please.
nick_harpold@msn.com |
Unregistered guest |
| Posted on Saturday, February 05, 2005 - 08:26 pm: |
|
hi could you please send me a wiring diagram for a clifford concept 300 please!!!!!!!!!!!!!! |
|
| Posted on Sunday, February 13, 2005 - 12:33 pm: |
|
please send a copy of this to:
johnfaulkner1985@hotmail.com
many thanks,
|
Wilrc2001 Unregistered guest |
| Posted on Saturday, February 19, 2005 - 05:47 pm: |
|
Can I get a copy too??? Thanx!!!
wilrc2001@hotmail.com |
Frederick Unregistered guest |
| Posted on Thursday, March 03, 2005 - 01:31 pm: |
|
Being in the middle of a G5 self-install, I would love a copy.
freddyog5@desertdrivel.com
Thanks!! |
|
| Posted on Thursday, March 03, 2005 - 03:15 pm: |
|
HAllo! Can you send me an installation guide/paper for a clifford matrix rs 3.5x!!
I hope you can help me
send it please to bleibanders2000@yahoo.com
THX for your help |
New member Username: Gisnunnie
Post Number: 1
Registered: Mar-05
|
| Posted on Friday, March 04, 2005 - 05:57 pm: |
|
I lost my instructions to program a second pager for Clifford Matrix 3.5. If this manual has the instructions please send to gisnunni@optonline.net |
New member Username: Hutchauto
Post Number: 2
Registered: Mar-05
|
| Posted on Sunday, March 06, 2005 - 07:09 pm: |
|
Hello, posting to this one as well. Used to install the older IPS and Polaris systems but need to move an Arrow 2 from one of my cars to another and can not locate a wireing diagram for it and as you know DEI is no help, and it it different from the older IPS 3 systems. If anyone has one can they send to me? hutchauto@aol.com Thanks!!! |
|
| Posted on Thursday, March 17, 2005 - 04:16 pm: |
|
hi i'm after a clifford concept 300 install manual if anyone can help. |
Unregistered guest |
| Posted on Thursday, March 17, 2005 - 04:22 pm: |
|
i,m after a concept 300 install manual as i only have the owners manual.
please send to sp4nner@hotmail.com |
Unregistered guest |
| Posted on Thursday, March 17, 2005 - 04:26 pm: |
|
i'm after a concept 300 install manual as i only have the owners manual and i need to change some settings.
please send to sp4nn3r@hotmail.com |
joknrok Unregistered guest |
| Posted on Wednesday, March 23, 2005 - 11:40 pm: |
|
I'd really appreciate a copy!
joknrok@yahoo.com
Thanks |
New member Username: Wimpie
Post Number: 1
Registered: Mar-05
|
| Posted on Wednesday, March 30, 2005 - 02:17 pm: |
|
Im searching for the install manual for the concept 300
does anyone have it for me Please ?
thnx wim-denhaag@wanadoo.nl
|
joeysivilla Unregistered guest |
| Posted on Monday, April 04, 2005 - 08:03 pm: |
|
joey_sivilla@hotmail.com for a bullet wiring manual thanks |
Unregistered guest |
| Posted on Monday, April 04, 2005 - 09:13 pm: |
|
if you have the time.. i would greatly appreciate a copy
khanhvo85@hotmail.com |
New member Username: Sketch
Post Number: 1
Registered: Apr-05
|
| Posted on Sunday, April 10, 2005 - 09:17 pm: |
|
Paul would love a copy of that installer cheers
eske9@hotmail.com
Sketch
Fucked off with Directechs for not having Clifford 650 info. |
FatSlag Unregistered guest |
| Posted on Friday, April 15, 2005 - 10:45 am: |
|
clifford concept 300 alarm install diagram here
http://www.dark.zen.co.uk/Clifford Concept 300 Wiring Diagram.pdf |
Unregistered guest |
| Posted on Friday, April 15, 2005 - 01:31 pm: |
|
please can any one send me an instalation manual for clifford concept 600 to sharon.longford@ntlworld.com thankyou |
New member Username: Xkusme
Post Number: 2
Registered: Apr-05
|
| Posted on Monday, April 18, 2005 - 09:36 am: |
|
Can you or someone send me one? link is long gone.
xkuzme@optusnet.com.au
|
monzablue16vgolf Unregistered guest |
| Posted on Wednesday, April 20, 2005 - 05:16 pm: |
|
http://www.dark.zen.co.uk/Clifford%20Concept%20300%20Wiring%20Diagram.pdf
try that and then
http://www.clifford.com/guides/ogs/concept300uk_owners.pdf
try that good luck dude!!!!!!!!! |
New member Username: Rg_120
Post Number: 1
Registered: Apr-05
|
| Posted on Friday, April 22, 2005 - 07:26 pm: |
|
Matrix 3.5 2004 Trailblazer
rg_120@hotmail.com
THANK YOU! |
New member Username: Tanya
Canada
Post Number: 1
Registered: Apr-05
|
| Posted on Monday, April 25, 2005 - 02:15 pm: |
|
I am looking for an installation guide for a clifford concept 100. Can anyone help? |
Unregistered guest |
| Posted on Thursday, April 28, 2005 - 07:02 pm: |
|
I need the wiring diagram for a clifford (Nova 400le). Can't find my book. Need Help. |
Unregistered guest |
| Posted on Saturday, April 30, 2005 - 06:52 am: |
|
I am looking for an installation/wiring guide for a clifford concept 650. Can anyone help? |
codeguy Unregistered guest |
| Posted on Sunday, May 08, 2005 - 01:47 pm: |
|
im looking for a schematic for a concept 30?
If you have one please send it to ilovetocode@gmail.com |
Unregistered guest |
| Posted on Sunday, May 08, 2005 - 08:36 pm: |
|
are you sending this program out?
I would like it please
jlsjsuee@dslextreme.com
thanks |
Unregistered guest |
| Posted on Monday, May 09, 2005 - 08:19 pm: |
|
Hello , i got a Clifford Super IPS alarm syster out of a Junk car (pick-n-pull)I pull/chop the wires "but" now i need wire dirgram ! ! It has 12 wires TOTAL and its on the top of unit. Red + Black - Yellow ? Purple ? Orange to Sensor BRN . White w/BRN stripe ? ect ect ?? Please send me 411 or tell me the cross refrence on this alam *Thanks |
Unregistered guest |
| Posted on Friday, May 13, 2005 - 12:41 pm: |
|
need wiring diagrame for clifford g4 polaris 2. please helP! |
Emc-Icon Unregistered guest |
| Posted on Monday, May 16, 2005 - 03:34 pm: |
|
i need a wiring diagram for a clifford concept 40
emc.icon@gmail.com |
Unregistered guest |
| Posted on Saturday, May 28, 2005 - 12:39 pm: |
|
does anyone have a wiring diagram for clifford smart windows 2 and the clifford consept 60? |
Unregistered guest |
| Posted on Wednesday, June 22, 2005 - 03:53 pm: |
|
can you send me the installation wiring diagram for clifford matrix rs 3.5 ?? thanks
vtspykez@yahoo.com |
Unregistered guest |
| Posted on Wednesday, June 29, 2005 - 09:25 am: |
|
i Am looking for a wiring diagram for a Clifford Matrix Can Any One Help Please Send To blackspor123@aol.com |
Unregistered guest |
| Posted on Friday, July 01, 2005 - 10:20 am: |
|
If you are still sending yes please.
Also has anyone got a copy of the user guide for the "G5 - CLIFFNET WIZARD" got the rs232 lead but it will not save any new setting to the alarm? Big Thanks
pemptage@hotmail.co.uk |
Spectre-Josh Unregistered guest |
| Posted on Sunday, July 10, 2005 - 04:53 pm: |
|
kgmelen@vermontel.net |
Unregistered guest |
| Posted on Monday, July 11, 2005 - 01:46 pm: |
|
Hello,
can anyone help me out: I need a wiring diagram for a clifford concept 40. after dropping the remote control to the ground, the system is completely dead. what happened?
i do not want leave my fiat barchetta unsecured anywhere.
please mail to hgnschmdt@aol.com
best
regards
hubert
|
Unregistered guest |
| Posted on Tuesday, July 12, 2005 - 05:12 am: |
|
Can any one please resend me a copy of the Clifford pro installer software again please.
Thanks people
peteremptage@hotmail.co.uk |
Unregistered guest |
| Posted on Wednesday, July 27, 2005 - 10:00 am: |
|
Please could u send me a copy of the wiring diagram for clifford concept 300 please
Rebecca18holly@aol.com |
Unregistered guest |
| Posted on Wednesday, July 27, 2005 - 11:14 am: |
|
could i have a copy please
andrewcottam@aol.com |
S2boost Unregistered guest |
| Posted on Saturday, July 30, 2005 - 11:59 am: |
|
Can someone plese email me a wiring diagram for the concept 650(G5)
mr.h83@tiscali.co.uk |
Unregistered guest |
| Posted on Thursday, August 18, 2005 - 06:48 am: |
|
I would really appreciate a copy especially for the concept 600..I need the non essential stuff like power windows etc
the_lummocks@hotmail.com
Thanks in advace! |
tony16V Unregistered guest |
| Posted on Tuesday, August 23, 2005 - 09:34 am: |
|
Pleae could someone email me this aswell.
anthony_small@lineone.net
Thanks Tony |
Bronze Member Username: Paradroid
Post Number: 13
Registered: Jul-05
|
| Posted on Tuesday, August 23, 2005 - 07:35 pm: |
|
If someone could email it to me I could host it with my collection of alarm manuals. |
|
| Posted on Thursday, September 01, 2005 - 05:05 pm: |
|
Clifford is a product fitted by experts. It is not a "home fit" alarm. If you want one of those, go to halfords, if not put up the cash to pay for a clifford trained fitter to help you out. |
Unregistered guest |
| Posted on Thursday, September 01, 2005 - 10:29 pm: |
|
I NEED A STEREO WIRING DIAGRAM FOR 96 SATURN SL-2. COULD ANYONE PLEASE HELP ME?! |
|
| Posted on Thursday, September 01, 2005 - 11:59 pm: |
|
Hi Folks,
It sounds like some of you are very security savy. I am not -and would appriciate some counsel on the best car alarm available. I think I want a 2 way type with keyless entry.
I guess I should also ask if you could suggest a second alarm within my current budget -lets say $350.00.
Thanks in advance!!
-SLEEPY |
Unregistered guest |
| Posted on Wednesday, September 07, 2005 - 12:31 am: |
|
Can anybody help me to have all the information needed to install a clifford concept 60 on a protege 2002. I just have de owner's manual. I would appreciate your help 'cause nobody in my country can install this alarm.
thanks |
Unregistered guest |
| Posted on Saturday, September 10, 2005 - 12:57 am: |
|
Vanessa, drop me an email and I'll send you the installation diagrams and car info. |
Unregistered guest |
| Posted on Saturday, September 10, 2005 - 01:02 am: |
|
Looking for information on Clifford systems? Email me. I can help! |
Unregistered guest |
| Posted on Monday, September 12, 2005 - 08:53 pm: |
|
could anybody resend me the pro installer clifford concept 60?
thanks in advance |
Unregistered guest |
| Posted on Thursday, September 15, 2005 - 02:09 pm: |
|
looking for a clifford 300 full wiring diagram i have one but ont all the parts please can anyone help
Cheers
|
New member Username: Rsharpe03
Texas
Usa
Post Number: 1
Registered: Sep-05
|
| Posted on Thursday, September 15, 2005 - 08:01 pm: |
|
Does anyone still have a copy of this? Clifford pro installer version Please email to rsharpe03@yahoo.com or post a link thanks Randall |
Unregistered guest |
| Posted on Tuesday, September 20, 2005 - 08:26 pm: |
|
What is this "Clifford Pro Installer" I keep hearing about? I might have it but I've never heard it call that before. |
New member Username: Rsharpe03
Texas
Usa
Post Number: 3
Registered: Sep-05
|
| Posted on Tuesday, September 20, 2005 - 09:22 pm: |
|
I was told it was a program that gives you vehicle wiring diagrams to ease in alarm installations. I used to have the DEI version but it was lost during an emergency hard drive reformat. thanks Randall |
Unregistered guest |
| Posted on Saturday, September 24, 2005 - 02:13 am: |
|
Ah, I see. I can get you a copy but it seems to only last 6 months. I think they do that so you update your software for the next model year. I'll send it to you. |
New member Username: Rsharpe03
Texas
Usa
Post Number: 4
Registered: Sep-05
|
| Posted on Saturday, September 24, 2005 - 06:26 pm: |
|
Thanks Skater Bum, i really appreciate the help. Just what I was looking for. thanks Randall |
Unregistered guest |
| Posted on Sunday, September 25, 2005 - 06:27 am: |
|
i'd love a copy of this |
nousername Unregistered guest |
| Posted on Tuesday, October 04, 2005 - 10:53 pm: |
|
Can someone send this to me??
Thanks!!!!
xenu@tampabay.rr.com |
gold ol me Unregistered guest |
| Posted on Tuesday, October 04, 2005 - 11:34 pm: |
|
jwangy84@gmail.com
|
Unregistered guest |
| Posted on Monday, October 10, 2005 - 06:37 pm: |
|
can you please send a copy to imabuttmunch@hotmail.com as it would be much appreciated
Thanks |
Unregistered guest |
| Posted on Thursday, October 13, 2005 - 12:17 pm: |
|
I have the Clifford Matrix Rs 3 and need the install guide. Please if anyone can help? my e-mail is lakers_20@msn.com thank you too who ever can help! |
Unregistered guest |
| Posted on Saturday, October 15, 2005 - 09:14 pm: |
|
I need to know what color the rear speaker output wires are for my 03 Saturn L series. i am trying to install a power Line converter for my amp. Someone please help.. |
Unregistered guest |
| Posted on Thursday, October 20, 2005 - 05:38 pm: |
|
Can someone send me the wiring guide for the Matrix Rs3.5 I have a 1995 Thunderbird SC and this thing is tricky.
Hunter701@aol.com |
Unregistered guest |
| Posted on Wednesday, October 26, 2005 - 10:50 am: |
|
Hello, It would be a great help if somone could email this "Clifford Pro Installer". I could really use it.... thanks |
Unregistered guest |
| Posted on Wednesday, October 26, 2005 - 10:53 am: |
|
Hello, It would be a great help if somone could email this "Clifford Pro Installer". I could really use it.... thanks please send to novica@hotmail.com |
Unregistered guest |
| Posted on Wednesday, October 26, 2005 - 08:15 pm: |
|
Can someone help me i need a install guide so i can add a new remote to a clifford matrix 3.5 system please email me tglander@gmail.com thanks! |
Unregistered guest |
| Posted on Thursday, October 27, 2005 - 06:40 pm: |
|
hello any chance of sending it to me cheers
mikeyjp25@hotmail.com |
CLIFFORD PRO INSTALLER Unregistered guest |
| Posted on Monday, October 31, 2005 - 12:37 am: |
|
OK! FOR ALL OF YOU WHO ARE LOOKING FOR THE CLIFFORD PRO INSTALLER, YOU CAN DOWNLOAD IT HERE:
http://s47.yousendit.com/d.aspx?id=1G277GPJ67MLP2A883R7IXR8T3
THIS LINK WILL ONLY BE GOOD UNTIL NOVEMBER 6TH SO DOWNLOAD IT QUICK! THE SERIAL NUMBER IS:
530888065622 |
|
| Posted on Thursday, November 03, 2005 - 08:45 pm: |
|
Can someone send me a installation diagram for a Concept 60? Thanks.
revlimit@gmail.com |
Unregistered guest |
| Posted on Tuesday, November 08, 2005 - 11:45 am: |
|
need install guide for an arrow 2 clifford alarm anyone help - yelloperil@tiscali.co.uk |
Bronze Member Username: Catalin
Surrey,
BC
Canada
Post Number: 29
Registered: Nov-05
|
| Posted on Tuesday, November 08, 2005 - 11:32 pm: |
|
Clifford.. !? I mssed the download by a day, any other place to find it? |
Skater Bum Unregistered guest |
| Posted on Thursday, November 10, 2005 - 11:55 pm: |
|
yelloperil and Anonymous at revlimit@gmail.com, you've both got mail! |
Unregistered guest |
| Posted on Tuesday, November 15, 2005 - 11:39 am: |
|
anyone got an installation guide for a Clifford Concept 600uk
I managed to download the user manual, but an install manual will allow me to iron out some faults.
Thanks in advance |
Skater Bum Unregistered guest |
| Posted on Tuesday, November 15, 2005 - 10:18 pm: |
|
jaybo, you've got mail! |
the ball Unregistered guest |
| Posted on Wednesday, November 16, 2005 - 07:44 am: |
|
G5 Concept 650, all i need to do is set up the proximity settings.
Do i need the pro installer?
if i do then could someone e-mail it to me at backoftheque@yahoo.com
Ta |
Skater Bum Unregistered guest |
| Posted on Wednesday, November 16, 2005 - 11:53 am: |
|
Hey "the ball",
There's a Concept 550 and a Concept 600 but i couldn't find a Concept 650. Here's the programming information for the Concept 600 which shouldn't be much different than the model you have.
1. Turn off any fluorescent lights that may interfere with the sensitivity testing of the Concept 600’s radar sensor.
2. Disarm the system with the remote control.
3. Transmit channel 16 on the master remote (LevelShift three times, then button 4). You will hear one chirp and the LED will turn on.
4. Test the Proximity Sensor’s primary zone by rapidly leaning through an open window into the passenger compartment. You will
hear a siren chirp when the primary zone is triggered. This should not occur near the window, but instead when you would be in a
position to touch the car stereo.
To change the sensitivity of the primary zone, press and release button 2 to increase sensitivity or button 4 to decrease sensitivity.
To rapidly increase or decrease several steps, press and hold the button. For each sensitivity increase, you will hear a higher and
higher pitched confirmation chirp. For each sensitivity decrease, you will hear a lower and lower pitched confirmation chirp. Two
LoudChirps indicate minimum and maximum settings of the 32-step range of settings. You may now press button 3 to adjust the
warning zone, or press button 1 to fully exit the Proximity Sensor adjustment mode (you will hear 3 chirps).
To change the sensitivity of the warning zone, press button 3 (you’ll hear 1 chirp). Then use the same procedure as above, but this
time, rapidly bring your hands and face to the window as a thief would to see what’s inside. The sensitivity of the warning zone
should be set so that it is triggered when your face and hands are within a few inches of the window, no further. When done, press
button 1 to reselect the primary zone (you will hear 2 chirps), then button 1 again to fully exit Proximity Sensor adjustment mode
(you will hear 3 chirps).
5. Repeat the preceding steps as required. An improperly adjusted sensor will cause the Concept 600 to false alarm or not respond
properly to a genuine threat. Keep in mind that you may need to reposition the sensor, possibly after the customer has had the
system for several days.
I hope this helps. |
