| Author |
Thread: Anyone Need Wiring Help!!!! |
    
New member Username: Fryeguy1967
Post Number: 3
Registered: Nov-06
|
| Posted on Monday, November 27, 2006 - 08:58 pm: |
|
I still need the stereo color wires codes for a 1993 Ford Explorer with a square black 8 pin connector and a flat grey 8 pin connector. The MORON who owned it before me cut the black connector off which is the speaker connector. I would just run wires to the speakers, but the vehicle has a built in amp, so I want to wire it up as well. HELP ME SOMEONE PLEASE !!!!! |
|
Relevant Product Info
|
|
New member Username: Doraemon
Post Number: 1
Registered: Nov-06
|
| Posted on Thursday, November 30, 2006 - 11:38 pm: |
|
Hello everyone, I am looking for the factory radio wiring color codes for a 1994 Cadillac Fleetwood. I am trying to put the original radio back in. Can anyone help me? Thanks! |
Silver Member Username: Leew
XXXX!!WWWW,
Yokosuka, ...
SPESNAZ. ...
Post Number: 980
Registered: Jan-06
|
| Posted on Friday, December 01, 2006 - 09:31 am: |
|
Take it here! Click me! |
New member Username: Emo_kid38034
Friendship,
Tennessee
Usa
Post Number: 4
Registered: Dec-06
|
| Posted on Friday, December 01, 2006 - 02:51 pm: |
|
hey i need help with a 1990 ford taurus stock radio wiring.i need the details on the stock wire order. |
Silver Member Username: Leew
XXXX!!WWWW,
Yokosuka, ...
SPESNAZ. ...
Post Number: 986
Registered: Jan-06
|
| Posted on Friday, December 01, 2006 - 03:52 pm: |
|
1990 ford taurus with JBL, Premium or Base radio system??? |
New member Username: Randall_h
Post Number: 1
Registered: Dec-06
|
| Posted on Tuesday, December 05, 2006 - 10:41 pm: |
|
This is going to sound nuts, but I'm trying to put a stock AM FM cassette cd player out of a 2003 Ford F-150 into a 2006 chevy 1500 and I need wiring diagrams for both, can someone PLEASE help me, Thanks |
New member Username: Alaria
Post Number: 1
Registered: Dec-06
|
| Posted on Wednesday, December 06, 2006 - 06:25 pm: |
|
Hi, Looking for some help please...I have a factory toyota tape/radio/cd deck, says it was made in '92, I took it out of a 4Runner. I have the plug, it has 15 pins as follows:
pin 1 - Pink w/ blue stripe
pin 2 - purple
pin 3 - grey w/ black stripe
pin 4 - blue w/ black stripe
pin 5 - brown
pin 6 - blue
pin 7 - black
second row pin 8 - black w/ red stripe
pin 9 - light green
pin 11 - black w/ white stripe
pin 12 - white
pin 13 - red
pin 14 - yellow
pin 15 - green
What does it mean? It also says anti-theft on it. Any chance someone can decipher this? Thank you thank you thank you... |
Gold Member Username: Leew
XXXX!!WWWW,
Yokosuka, ...
Holla Back Y...
Post Number: 1059
Registered: Jan-06
|
| Posted on Friday, December 08, 2006 - 08:28 pm: |
|
Click me! I am a lift for the schema  ! |
New member Username: Tanders
Post Number: 1
Registered: Dec-06
|
| Posted on Friday, December 08, 2006 - 09:24 pm: |
|
Hi There,
Was just about to hook up a Kenwood DPX-301 and ran into a doubtful wire labeled Amp ground on my harness. It's not listed and I do have an amplifier in my 2005 Frontier. Should I just ground it with the other ground wire? |
|
|
New member Username: Cashmack
Post Number: 1
Registered: Dec-06
|
| Posted on Saturday, December 09, 2006 - 11:36 pm: |
|
Hello everyone. Can someone please post the stereo wiring diagram for a 2004 GMC Yukon XL Bose system?
Thanks in advance. |
New member Username: Alaria
Post Number: 2
Registered: Dec-06
|
| Posted on Sunday, December 10, 2006 - 12:30 am: |
|
Jennifer, I can't log in. Is it possible to e-mail the schematic to me directly? alariata@gmail.com Thanks! |
New member Username: Fyau
Sydney,
NSW
Australia
Post Number: 7
Registered: Sep-06
|
| Posted on Sunday, December 17, 2006 - 08:46 pm: |
|
Hi Jennifer my superstar. I have bought a camera system for rear/reversing parking and want to install to my Honda CRV 2002 sport model. Have you got the schematics to extract the indication wire for reversing from the front control units? Many thanks in advance. |
New member Username: Reckless92490
Post Number: 4
Registered: Dec-06
|
| Posted on Sunday, December 17, 2006 - 10:48 pm: |
|
wiring diagram for a hyudai accent gl please |
Gold Member Username: Leew
XXXX!!WWWW,
Yokosuka, ...
YAKUDZA JAP...
Post Number: 1131
Registered: Jan-06
|
| Posted on Monday, December 18, 2006 - 09:14 am: |
|
for you, Honda CRV 2002 backup circuit
Just in case: I connected my navigation unit (reverse wire) direct to right rear taillight back up ( + )light bulb... |
New member Username: Fyau
Sydney,
NSW
Australia
Post Number: 8
Registered: Sep-06
|
| Posted on Monday, December 18, 2006 - 08:19 pm: |
|
Many thanks, Jennifer. |
Gold Member Username: Leew
XXXX!!WWWW,
Yokosuka, ...
YAKUDZA JAP...
Post Number: 1136
Registered: Jan-06
|
| Posted on Monday, December 18, 2006 - 09:26 pm: |
|
Anytime Freddy! |
New member Username: Noreflection
Post Number: 1
Registered: Dec-06
|
| Posted on Tuesday, December 19, 2006 - 03:49 pm: |
|
well after searching and searching I havent found any thing, I would like to have the diagram from a 05 malibu classic and posably pin locations? I got a harness from best buy and it clips in but the unit wont power on and I noticed the the 4 pins to the side that cary power are in differnt locations. He gave me a harness for 98+ so that could be the problem.
Thanks |
New member Username: Asleon
Post Number: 1
Registered: Dec-06
|
| Posted on Tuesday, December 19, 2006 - 11:16 pm: |
|
Hi, I have a '93 Toyota Corolla with a Factory AM/FM Tape deck, Model #A56403. I want to replace it with a Sanyo AM/FM/Tape/CD unit, but I can't find pinouts for the two plugs that go into the Factory deck. Do you have any info I can use? Is it worth looking for an adapter plug?
Thanks |
New member Username: Smrts82
Post Number: 4
Registered: Dec-06
|
| Posted on Wednesday, December 20, 2006 - 06:20 pm: |
|
I am trying to find the easiest(and safest) power source to supply power to a dvd player and 2 headrest monitors in a 2004 chevy suburban. I don't know if I can power it off of the wires running to the power source on my dash without overloading it or whay the best solution is. |
New member Username: Daviddaddy
Santa Maria,
Ca
U.S.A.
Post Number: 1
Registered: Dec-06
|
| Posted on Thursday, December 21, 2006 - 09:16 pm: |
|
Hi I need Help i need an wiring diagram for a 89 dodge caravan i just bought a nice cd player for it and i dont want to mess it up ive installed cd players before with no problem but i also had the diagram so any help you could give me would be nice thank you so much |
New member Username: D~m~a~n
Post Number: 1
Registered: Dec-06
|
| Posted on Friday, December 22, 2006 - 04:25 pm: |
|
Hello Everybody,
Im new here to this website and I need some help with my wiring. I have a 96 Pontiac Sunfire 2 Door Convertible I just recently took out the stock cd player because I wanted to install a new one.
Now I had to buy a harness for my new radio and a kit so that my radio would fit. I need to know what colors coming in from my car go with the radio. There are no labels except on the harness and the harness dosent even fit the clip on the wires coming from my car. But the harness does fit my cd player and says its suppose to fit my car. I think I neead a wiring diagram.
Not only that but the inside of my car lights wont come on. My keypad that I had no longer works for some reason. Does this have to do with the wires not being connected....?
Desperate please help..... |
Gold Member Username: Leew
XXXX!!WWWW,
Yokosuka, ...
YAKUDZA JAP...
Post Number: 1161
Registered: Jan-06
|
| Posted on Friday, December 22, 2006 - 09:41 pm: |
|
Click here! |
New member Username: Jgelp7
Post Number: 4
Registered: Dec-06
|
| Posted on Monday, December 25, 2006 - 10:37 pm: |
|
I'm installing a new head unit in my 2000 Jeep Grand Cherokee Limited with the Infinity Gold system with no cd changer. I got a Scosche wiring harness and am having trouble finding any wire with constant power. I found the ignition power (red). There is also a mystery wire (yellow w/ violet) which plugged in seperate from the rest into the factory radio. Do you think you could help? |
Gold Member Username: Leew
XXXX!!WWWW,
Yokosuka, ...
YAKUDZA JAP...
Post Number: 1167
Registered: Jan-06
|
| Posted on Tuesday, December 26, 2006 - 07:50 pm: |
|
quote: a mystery wire (yellow w/ violet)
do not toch that wire,it's PSI BUS wire (for diagnostic)
This is what you have to use it:
RED/WHT = Constant + 12V
WHT/RED = Acc wire. |
New member Username: Farlie
Post Number: 1
Registered: Dec-06
|
| Posted on Wednesday, December 27, 2006 - 01:55 am: |
|
Hi,
I have a 06 Mitsubishi Lancer and i want to replace the head deck, can anyone please help me locate on the web a wiring diagram for this model. I just need to determine what the coloured wires are.
thanks |
Gold Member Username: Leew
XXXX!!WWWW,
Yokosuka, ...
YAKUDZA JAP...
Post Number: 1168
Registered: Jan-06
|
| Posted on Wednesday, December 27, 2006 - 08:40 am: |
|
Jason Refalo
Do you have 4 speakers or 6 speakers and your mitsubishi model trim is a "evolution" ? |
New member Username: Jgelp7
Post Number: 9
Registered: Dec-06
|
| Posted on Wednesday, December 27, 2006 - 11:58 am: |
|
Jennifer, I dont know if this has anything to do with the wiring but after I installed the head unit, with not exactly flawless wiring (The only way it worked was when the yellow and the red wires from the installation harness were all together), my dome lights will not go off unless I turn the dash/interior lights completely off. They won't go off when being pushed. Also, my keyless entry on the keychain won't work. When I click lock or unlock, nothing happens. Did I blow a fuse or screw up the wiring? I don't see how the ehad unit installation could have done this, but it happened right after it was installed. |
Gold Member Username: Leew
XXXX!!WWWW,
Yokosuka, ...
YAKUDZA JAP...
Post Number: 1170
Registered: Jan-06
|
| Posted on Wednesday, December 27, 2006 - 12:57 pm: |
|
well this is a power side from your car (sound system)...but I cannot get it: why need the GRN/WHT wire from the trunk relay...What I think ,it's need for the alarm or for a power door control module
anyway:
ACC aka switched is = BLUE/Yellow
Power aka Constant is = +12V Red/Black
Try to connect like that and then try the doors(I mentioned remote control). I wiil check for you the dash light! |
Gold Member Username: Leew
XXXX!!WWWW,
Yokosuka, ...
YAKUDZA JAP...
Post Number: 1171
Registered: Jan-06
|
| Posted on Wednesday, December 27, 2006 - 01:06 pm: |
|
Hah,I got it....Alright ,the GRN/Wht wire it's a power side from illumination and the blk/yellow wire it's a reverse wire( like the ground !). you have to connect both wires to illum.! This mitsubishi does not have a illumination control unit...they use for that a relay! (simple but crazy) |
New member Username: Farlie
Post Number: 2
Registered: Dec-06
|
| Posted on Wednesday, December 27, 2006 - 02:43 pm: |
|
Do you have 4 speakers or 6 speakers and your mitsubishi model trim is a "evolution" ?
It's a four speaker system.
I tried to wire it up as per the instruction above, no luck. Relay box makes clicking sound when car is switched on to accessories.
Thanks |
Gold Member Username: Leew
XXXX!!WWWW,
Yokosuka, ...
YAKUDZA JAP...
Post Number: 1174
Registered: Jan-06
|
| Posted on Wednesday, December 27, 2006 - 03:04 pm: |
|
Something is no right. Tell me,from my picture all wires match to your car?
P.S. Check all fuses! and don't connect the illumination wires yet. |
Gold Member Username: Leew
XXXX!!WWWW,
Yokosuka, ...
YAKUDZA JAP...
Post Number: 1175
Registered: Jan-06
|
| Posted on Wednesday, December 27, 2006 - 03:29 pm: |
|
check out all fuses! |
Bronze Member Username: Jgelp7
Post Number: 11
Registered: Dec-06
|
| Posted on Wednesday, December 27, 2006 - 03:33 pm: |
|
So could wiring the head unit have any effect on making my dome lighst stay on? And thank you for all your help. |
Gold Member Username: Leew
XXXX!!WWWW,
Yokosuka, ...
YAKUDZA JAP...
Post Number: 1176
Registered: Jan-06
|
| Posted on Wednesday, December 27, 2006 - 04:10 pm: |
|
quote:my dome lighst stay on?
No, I do remember, all chrysler cars got special switch for dome light: if you turn that switch all the way up then the light will stay on...but if you make all the way down then it's compl. off.
BTW. Make it step by step...before connect all speakers, power +12 and switched wires. Try if it works ok.If ok, then connect illumination ,if you get problems with light...then we will start dig it diper! |
Bronze Member Username: Jgelp7
Post Number: 14
Registered: Dec-06
|
| Posted on Wednesday, December 27, 2006 - 08:23 pm: |
|
Jennifer, I installed the new head unit and had all these problems so I put the stock one back in and the radio did not come on with it wired exactly how it was before we touched it. The radio fails to come on, the dome lights stay on unless you turn the dash and interior lights completely off, the keyless entry doesnt work, and the driver's door power lock only works for the driver's door now and not for the entire car. I'm going to have to bring it into the dealership to have it checked out. Has anyone else ever tried installing an aftermarket head unit into a Jeep Grand Cherokee '00 Lmtd and had the same problems? What is going on? |
Gold Member Username: Leew
XXXX!!WWWW,
Yokosuka, ...
YAKUDZA JAP...
Post Number: 1178
Registered: Jan-06
|
| Posted on Wednesday, December 27, 2006 - 08:54 pm: |
|
hey Jgelp7 ,do not panic...You shorted something, check all fuses,that is all! Ok, remove your headunit and try if everything work without the hu... ,maximum you blew couple fuses...just check all fuse boxe (under hood,under dash)...First time always hard...but I am here ,I'll help you out! |
New member Username: Rescue207
Post Number: 1
Registered: Dec-06
|
| Posted on Wednesday, December 27, 2006 - 08:55 pm: |
|
I am installing a pioneer DEH-P6500 In a 1993 Chevy full size pickup the problem I am having when I hooked everything up The CD player comes on but no sound Any Help apprecatied Thanks
Rescue207 |
Gold Member Username: Van_man
Boston South,
MA
Post Number: 1564
Registered: Mar-06
|
| Posted on Wednesday, December 27, 2006 - 09:04 pm: |
|
1996 chevy Lumina factory radio wiring please. |
Gold Member Username: Leew
XXXX!!WWWW,
Yokosuka, ...
YAKUDZA JAP...
Post Number: 1179
Registered: Jan-06
|
| Posted on Wednesday, December 27, 2006 - 09:21 pm: |
|
I'll give you later!
Jgelp7!, do not go to the dealership,they will tell ya that it's you killed body control module (BCM)and it's cost you $1000...just in case rebuild BCM $500...the radio circuit does not depend of the power lock circuit...check all fuses,every box with tester or DMM ! |
Gold Member Username: Leew
XXXX!!WWWW,
Yokosuka, ...
YAKUDZA JAP...
Post Number: 1180
Registered: Jan-06
|
| Posted on Wednesday, December 27, 2006 - 09:25 pm: |
|
Duane Rush ,I just checked your car but I didn't see any speakers..you forgot to buy it! |
New member Username: Rescue207
Post Number: 2
Registered: Dec-06
|
| Posted on Wednesday, December 27, 2006 - 09:29 pm: |
|
Nope they are factory 2 on the dash and 2 behind the seats it is a pickup truck thanks |
Gold Member Username: Leew
XXXX!!WWWW,
Yokosuka, ...
YAKUDZA JAP...
Post Number: 1181
Registered: Jan-06
|
| Posted on Wednesday, December 27, 2006 - 09:38 pm: |
|
for you click here! |
Gold Member Username: Leew
XXXX!!WWWW,
Yokosuka, ...
YAKUDZA JAP...
Post Number: 1182
Registered: Jan-06
|
| Posted on Wednesday, December 27, 2006 - 09:43 pm: |
|
Duane Rush! what is exactly...K1500 or? and what was before Amp,EQ...? |
New member Username: Rescue207
Post Number: 3
Registered: Dec-06
|
| Posted on Wednesday, December 27, 2006 - 09:45 pm: |
|
I had to take the Eq / cassette player out and put the pioneer in |
Gold Member Username: Leew
XXXX!!WWWW,
Yokosuka, ...
YAKUDZA JAP...
Post Number: 1183
Registered: Jan-06
|
| Posted on Wednesday, December 27, 2006 - 10:01 pm: |
|
Duane,Clik here!
You will get two schemas with amp and without amp,just check them and I am sure you will find your problem! |
Bronze Member Username: Jgelp7
Post Number: 15
Registered: Dec-06
|
| Posted on Wednesday, December 27, 2006 - 10:09 pm: |
|
I've checked the fuses and they're all good. If it was a short, then why would the interior lights stay on? Something with the radio removal has effected my power locks, windows, keyless entry, and interior lights. I'm utterly confused. |
New member Username: Rescue207
Post Number: 4
Registered: Dec-06
|
| Posted on Wednesday, December 27, 2006 - 10:11 pm: |
|
Jennifer I also took the recever out from under dash should I have done that cause the wires that was on top of the recever was what I was needing for the wireing harness |
Gold Member Username: Leew
XXXX!!WWWW,
Yokosuka, ...
YAKUDZA JAP...
Post Number: 1185
Registered: Jan-06
|
| Posted on Wednesday, December 27, 2006 - 10:12 pm: |
|
without radio> power locks, windows, keyless entry, and interior lights working or not? |
Bronze Member Username: Jgelp7
Post Number: 19
Registered: Dec-06
|
| Posted on Wednesday, December 27, 2006 - 10:20 pm: |
|
I installed the aftermarket head unit and the power locks, windows, and keyless entry did not work and the interior lights stayed on unless completely shut off(dash lights and all). I removed the aftermarket and put the stock back in just as it was, but it did not power up. I'm thinking there might be some sort of anti-theft on it to keep it from working right now. Any ideas on how to sort out this mess and have everything work properly, whether the car have the stock or aftermarket head unit? |
New member Username: Longbonger22
Post Number: 1
Registered: Dec-06
|
| Posted on Thursday, December 28, 2006 - 09:13 am: |
|
Replacing the speakers in my 2001 Jeep Cherokee, and I'm looking for a wiring diagram. It's the 60th Anniversary Sport Edition. Thanks! |
|
|
Closed: New threads not accepted on this page
Upload