| Author |
Thread: Which amp for 2 L7s |
    
Bronze Member Username: Highstone
Post Number: 45
Registered: Mar-06
|
| Posted on Tuesday, March 21, 2006 - 06:32 pm: |
|
need an amp to push my 2 12" kicker L7s. i'm planning to use 1 (2channel amp). each sub is 750 watts RMS (1500 peak power) |
|
|
|
Gold Member Username: Southernrebel
Monroe,
Louisiana
USA
Post Number: 2491
Registered: Mar-04
|
| Posted on Tuesday, March 21, 2006 - 07:18 pm: |
|
what voice coils do they have? (DVC 2ohm or DVC 4ohm?)
you will be better off w/ a class-d amp. (1 channel) |
Silver Member Username: Juliob
Santo Domingo
Dominican Re...
Post Number: 243
Registered: Dec-05
|
| Posted on Tuesday, March 21, 2006 - 08:01 pm: |
|
if they're DVC 2 ohms, some will disagree but you can buy lanzar optidrive that is 1900w rms at 1/2 ohm, and if you have the dual 4 ohm version then you can buy a ED nine 1 or hifonics bx1605 if you're on a budget |
Gold Member Username: Southernrebel
Monroe,
Louisiana
USA
Post Number: 2499
Registered: Mar-04
|
| Posted on Tuesday, March 21, 2006 - 08:05 pm: |
|
even if they are DVC 2ohm subs...you can get class-d amps that put out 1500w+ at 2ohms.
(ex: MTX, kicker) |
Bronze Member Username: Highstone
Post Number: 48
Registered: Mar-06
|
| Posted on Tuesday, March 21, 2006 - 08:25 pm: |
|
it's 4 ohms.. and i really want 1 amp.. don't have place to put another one.. |
Gold Member Username: Rovin
Trinidad & T...
Post Number: 6804
Registered: Jul-05
|
| Posted on Tuesday, March 21, 2006 - 11:22 pm: |
|
PPI DCX1500
OR DIAMOND AUDIO
D61500.1 ..... |
Gold Member Username: Southernrebel
Monroe,
Louisiana
USA
Post Number: 2500
Registered: Mar-04
|
| Posted on Tuesday, March 21, 2006 - 11:29 pm: |
|
^i agree w/ rovin. |
Bronze Member Username: Highstone
Post Number: 49
Registered: Mar-06
|
| Posted on Tuesday, March 21, 2006 - 11:49 pm: |
|
guyzzz.. i wan 1 amp that has 2 channels. that can support 2 kicker 12" L7s. |
Gold Member Username: Rovin
Trinidad & T...
Post Number: 6806
Registered: Jul-05
|
| Posted on Tuesday, March 21, 2006 - 11:52 pm: |
|
thats gonna be expensive & draw more current
D class (MONO) amps r especially made to run subs ..... |
Bronze Member Username: Highstone
Post Number: 50
Registered: Mar-06
|
| Posted on Wednesday, March 22, 2006 - 12:14 am: |
|
well then how would i connect the two amps for the subs.. would the RCAs go to one amp and they will be connected by some wire.. so something else.. |
Bronze Member Username: Highstone
Post Number: 51
Registered: Mar-06
|
| Posted on Wednesday, March 22, 2006 - 12:15 am: |
|
or do u want me to connect both subs to 1 channel amp.. if so .. is that possible..
|
Gold Member Username: Rovin
Trinidad & T...
Post Number: 6807
Registered: Jul-05
|
| Posted on Wednesday, March 22, 2006 - 12:21 am: |
|
those amps i mentioned above
u onlt need 2 buy 1 of either ..... |
Gold Member Username: Rovin
Trinidad & T...
Post Number: 6808
Registered: Jul-05
|
| Posted on Wednesday, March 22, 2006 - 12:22 am: |
|
Only i meant ^.... |
Bronze Member Username: Highstone
Post Number: 52
Registered: Mar-06
|
| Posted on Wednesday, March 22, 2006 - 12:23 am: |
|
so how would i connect 2 subs to 1 one-channel amplifier? |
Silver Member Username: Nemen
Post Number: 651
Registered: Dec-05
|
| Posted on Wednesday, March 22, 2006 - 12:39 am: |
|
if they are single 4ohms wire them in parallel and youll have a 20hm load so you will need a amp stable at 20hms |
Bronze Member Username: Highstone
Post Number: 53
Registered: Mar-06
|
| Posted on Wednesday, March 22, 2006 - 12:43 am: |
|
if the subs are 4 ohms or amp is 4 ohm.. can u explain.. maybe a diagram.. sorry i'm very new at this..thanks |
