| Author |
Thread: Bass blockers |
    
New member Username: Ledzep
Post Number: 4
Registered: Nov-05
|
| Posted on Monday, February 27, 2006 - 12:04 am: |
|
does anyone know where i can buy bass blockers that cut from 85hz down? i have a amplified bazooka tube BTA8100 , and its built in crossover cuts at 85hz, yet all i can find in bass blockers to compliment this bass tube only go down to 200hz, which would leave a freq gap between 85hz and 200hz. i found some on ebay, but not impressed with the brand name, sorta generic. got any links that sell 85hz bass blockers ? |
|
|
|
Platinum Member Username: Glasswolf
Wisteria,
Lane
USA
Post Number: 11244
Registered: Dec-03
|
| Posted on Monday, February 27, 2006 - 06:21 am: |
|
get a bass blocker at about 100-120Hz.
leave the gap there.
the roll off will cover the gap. the XO point isn't a brick wall cut off. It's just the point where the volume starts to diminish from there on down.
|
New member Username: Ledzep
Post Number: 8
Registered: Nov-05
|
| Posted on Monday, February 27, 2006 - 08:21 pm: |
|
thanks glasswolf. do you know where i can get some middle of the road quality bass blockers at that spec? |
Platinum Member Username: Glasswolf
Wisteria,
Lane
USA
Post Number: 11260
Registered: Dec-03
|
| Posted on Tuesday, February 28, 2006 - 12:12 pm: |
|
FMOD makes RCA level ones you can order from partsexpress.com or try crutchfield.. or just build your own.
www.the12volt.com has diagrams for 2nd order high-pass filters.
|
New member Username: Nypdlapd
Post Number: 3
Registered: Feb-06
|
| Posted on Tuesday, February 28, 2006 - 04:48 pm: |
|
Crutchfield is a RIPOFF |
Platinum Member Username: Glasswolf
Wisteria,
Lane
USA
Post Number: 11271
Registered: Dec-03
|
| Posted on Tuesday, February 28, 2006 - 05:32 pm: |
|
that they are, but they stock the bass blockers.
I don't buy them pre-made, I make my own crossovers, so I really don't have a lot of info on where to buy the prefab jobs online other than there or other craptacular stores like CC and BB
|
|
