| Author |
Thread: I need advice a.s.a.p PLEASE |
    
Silver Member Username: Goatin
U.S.A
Post Number: 245
Registered: Jan-06
|
| Posted on Saturday, February 11, 2006 - 10:48 pm: |
|
I am getting 4 used 4ohm dual voice coil they were all hooked up in 2 ohm a impedance on the amp but the amp was putting out the power at 4 ohms will the subs be ok?? |
|
|
|
Silver Member Username: Lbeckner
Tulsa,
Ok
Usa
Post Number: 612
Registered: Oct-04
|
| Posted on Saturday, February 11, 2006 - 10:53 pm: |
|
wtf r u talkingabout? |
Silver Member Username: Goatin
U.S.A
Post Number: 247
Registered: Jan-06
|
| Posted on Saturday, February 11, 2006 - 10:59 pm: |
|
the subs are DVC 4 ohm and there is 4 of them they are wired to a 2 ohm load.
the amp being used is 1000 watts at 4 ohms because it is bridged to 4 ohms.
My Question:will that setup hurt the subs??? |
Gold Member Username: Rovin
Trinidad & T...
Post Number: 5471
Registered: Jul-05
|
| Posted on Saturday, February 11, 2006 - 11:01 pm: |
|
{which models of subs & amp r u talking about .
What price r u getting them for ?
Usually when subs r ran with wrong impedences the amp quicker gets damaged than the subs.} |
Silver Member Username: Goatin
U.S.A
Post Number: 248
Registered: Jan-06
|
| Posted on Saturday, February 11, 2006 - 11:07 pm: |
|
4 for 200 shipped kicker 12" CVR ran by a old scool 1000 watt kicker 2 ch bridged to one channel
so the subs will be ok just not the amp right ?(not getting the amp antway) |
Gold Member Username: Rovin
Trinidad & T...
Post Number: 5474
Registered: Jul-05
|
| Posted on Saturday, February 11, 2006 - 11:14 pm: |
|
those subs r 400wrms each right ?
where u getting it from - ebay or u know the guy personally , if u know him examine/listen 2 them 2 see if they run good still . If he never drived them too hard then it could still be fine ... |
Silver Member Username: Goatin
U.S.A
Post Number: 250
Registered: Jan-06
|
| Posted on Saturday, February 11, 2006 - 11:14 pm: |
|
 |
Silver Member Username: Goatin
U.S.A
Post Number: 251
Registered: Jan-06
|
| Posted on Saturday, February 11, 2006 - 11:17 pm: |
|
its off ebay and yes they are 400rms
should I go for it? |
Silver Member Username: Dustin3
Tigard,
Or
U.S.
Post Number: 429
Registered: Oct-05
|
| Posted on Saturday, February 11, 2006 - 11:20 pm: |
|
if you have 4 of them, you need an a 1500 watts amp |
Silver Member Username: Goatin
U.S.A
Post Number: 252
Registered: Jan-06
|
| Posted on Saturday, February 11, 2006 - 11:26 pm: |
|
I just want to know if I should get them??  |
Gold Member Username: Rovin
Trinidad & T...
Post Number: 5476
Registered: Jul-05
|
| Posted on Saturday, February 11, 2006 - 11:26 pm: |
|
12" right ?
If the buyer is giving u some kinda guaranty that its in good working condition & that u can return it if ur unsatified - then u can chance it .....
this is the price of a new 1
http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=14817
& is $200 including the amp too ?...... |
Silver Member Username: Goatin
U.S.A
Post Number: 253
Registered: Jan-06
|
| Posted on Saturday, February 11, 2006 - 11:51 pm: |
|
thank you [...Rovin...] for your help.
I Bought Them By The Way
Maaan I hope they work....
 |
Silver Member Username: Cadillacdb
Houston ,
TX
Post Number: 512
Registered: Aug-05
|
| Posted on Sunday, February 12, 2006 - 01:30 am: |
|
what u gonna do wit ur L5's ? |
Silver Member Username: Goatin
U.S.A
Post Number: 254
Registered: Jan-06
|
| Posted on Sunday, February 12, 2006 - 02:03 am: |
|
I already sold one .Why you wana buy the other I'll sell it to ya cheap $160+free ship if you want it. |
Silver Member Username: Goatin
U.S.A
Post Number: 256
Registered: Jan-06
|
| Posted on Sunday, February 12, 2006 - 02:07 am: |
|
I already sold one of them.Why do you want to buy the other I'll sell it to ya for $160+Freeship |
Gold Member Username: Tjmutlow
Post Number: 1426
Registered: Sep-05
|
| Posted on Sunday, February 12, 2006 - 07:30 am: |
|
first off, however the subs are wired is what the amp sees to play, if they are wired to 2 ohms, then that is what the amp sees, it won't read 4ohms. |
Silver Member Username: Goatin
U.S.A
Post Number: 259
Registered: Jan-06
|
| Posted on Sunday, February 12, 2006 - 10:11 am: |
|
even if it is a 2 channel amp that has been bridged to 4 ohms, running a 2 ohm load off of the subs the subs the amp will run in 2ohm anyway? |
Gold Member Username: Tjmutlow
Post Number: 1440
Registered: Sep-05
|
| Posted on Sunday, February 12, 2006 - 02:20 pm: |
|
the amp will see what ever the ohm load of the speakers are, and if it is a 2ohm load most 2 channels are not stable at that load.... |
