| Author |
Thread: Which amp??? |
    
New member Username: Goinglow
Post Number: 5
Registered: Jan-06
|
| Posted on Wednesday, February 08, 2006 - 08:27 pm: |
|
I'm looking at getting 2 Diamond Audio 12s D612D2/D612D4 (ohms depending on what amp im getting) But these are 600 watt RMS subs, and from what I've heard these should be an excellent choice. Anyway I get really good deals on Alpine MRD-M605 which puts out 600x1 RMS @ 2ohms, so I would run 1 to each sub. The thing is I MUST have 2 amps, 1 running to each sub, for design purposes. But let me know of my amp options here and what you think about this setup. Thx. |
|
|
|
Gold Member Username: Rovin
Trinidad & T...
Post Number: 5378
Registered: Jul-05
|
| Posted on Wednesday, February 08, 2006 - 08:35 pm: |
|
well if u have 2 use that MRD-M605 then its simple buy (2) 4ohms dvc subs & run 1 with each of that amp.
but i'd prolly buy (2) 4ohms dvc subs & use 1 amp like a PPI dcx 1500 or a Diamond D61000.1 , each does 1500wrms @ 1 ohm . Would sound even better & amp would have headroom so it'll run cooler ...... |
New member Username: Goinglow
Post Number: 6
Registered: Jan-06
|
| Posted on Wednesday, February 08, 2006 - 08:43 pm: |
|
Any other amps you might recommend since I need to run 2...and these dimensions on these amps are incredible...im going to be doing some hella fiberglass work |
Gold Member Username: Rovin
Trinidad & T...
Post Number: 5384
Registered: Jul-05
|
| Posted on Wednesday, February 08, 2006 - 09:04 pm: |
|
why must u have to run 2 amps ???......... |
New member Username: Goinglow
Post Number: 7
Registered: Jan-06
|
| Posted on Wednesday, February 08, 2006 - 09:20 pm: |
|
show/design purposes...going to mount them on my rear doors need to keep everything consistent |
Gold Member Username: James1115
Ct
Post Number: 4932
Registered: Dec-04
|
| Posted on Wednesday, February 08, 2006 - 09:26 pm: |
|
jl 500/1's |
Gold Member Username: Rovin
Trinidad & T...
Post Number: 5390
Registered: Jul-05
|
| Posted on Wednesday, February 08, 2006 - 09:44 pm: |
|
uh ok - then might as well match
2 Diamond D3600.1 amps with 2 4ohms dvc D6 subs ...... |
Gold Member Username: Rovin
Trinidad & T...
Post Number: 5391
Registered: Jul-05
|
| Posted on Wednesday, February 08, 2006 - 09:46 pm: |
|
Whoooops - mistake above
i meant (2) 2ohms dvc subs with 2 of those amps ..... |
New member Username: Goinglow
Post Number: 8
Registered: Jan-06
|
| Posted on Thursday, February 09, 2006 - 01:31 am: |
|
thanks man i must of overlooked that amp on their site..now i jsut gota find out how many pairs of mids/highs to run |
