| Author |
Thread: 2006 Ford Factory Navigation |
    
New member Username: Fastcarguy
Post Number: 1
Registered: Nov-05
|
| Posted on Monday, November 21, 2005 - 05:28 am: |
|
Hello Everyone,
I just purchased and installed a 2006 Ford Explorer Factory Navigation unit into my 2005 Ford F150 Pickup. Does anyone have a diagram of the pin configuration for this unit. The Ford part number is: 6G1t-18k931-AD. It is made by pioneer and is similar in looks and operation as the Pioneer AVIC-D1. Everything works great except the map does not move. I have traced this problem down to the Speed Pulse Signal. I know what wire it is on the Ford Wiring harness but I'm not sure which pin it connects to on the back of my navigation unit. The back of the navigation unit has 3 plugs and is exactly the same as the new in dash 6 CD audiophile radios.
Any help would be greatly appreciated.
Thanks,
Fastcarguy |
|
|
|
New member Username: Dsturner
Post Number: 1
Registered: Jun-06
|
| Posted on Sunday, June 18, 2006 - 05:10 pm: |
|
Did you ever have any luck finding the location of the speed sensor pin on the 2006 Ford Factory Navigation radio. I am having the same problem. |
New member Username: Stangray
Post Number: 2
Registered: Aug-06
|
| Posted on Tuesday, August 22, 2006 - 06:17 pm: |
|
Here is your fix. The radio needs to be re-programmed for your vehicle. Contact Dominic at ARC 781-721-0092 Cost is $100 Tell them Stan sent you. |
Gold Member Username: Illuminator
USA
Post Number: 4324
Registered: Apr-05
|
| Posted on Tuesday, August 22, 2006 - 06:21 pm: |
|
Just curious, how did you obtain the new unit (as old as this thread is)? I would have preferred to just buy the Pioneer model and completely bypass the ford logo unless the designated ford model was cheaper of course. |
New member Username: Stangray
Post Number: 3
Registered: Aug-06
|
| Posted on Tuesday, August 22, 2006 - 06:39 pm: |
|
I purchased off ebay. Unit, dvd and antenna was approx. $600.00 They can reprogram the radio to match the pinout for the specific ford vehicle.
So for me, it was cheaper than the Pioneer D1 and is pretty close to the same thing. |
Gold Member Username: Illuminator
USA
Post Number: 4338
Registered: Apr-05
|
| Posted on Tuesday, August 22, 2006 - 06:59 pm: |
|
Wow, not bad at all, then. Who services it if it dies? Do you send it to Ford who then in turn sends it to Pioneer? Or directly to Pioneer? |
New member Username: Stangray
Post Number: 4
Registered: Aug-06
|
| Posted on Tuesday, August 22, 2006 - 07:17 pm: |
|
Ford has repair centers in most large cities. ARC who is doing the re-programming can also repair units.. |
Gold Member Username: Illuminator
USA
Post Number: 4360
Registered: Apr-05
|
| Posted on Wednesday, August 23, 2006 - 10:06 am: |
|
Interesting  Thanks for the info. |
New member Username: Berg
Stratford,
CT
Post Number: 1
Registered: Sep-06
|
| Posted on Monday, September 11, 2006 - 07:23 pm: |
|
Does this unit have a video input for a back up cam? |
New member Username: Stangray
Post Number: 5
Registered: Aug-06
|
| Posted on Monday, September 11, 2006 - 08:10 pm: |
|
There is no factory input for a cam. They do make an interface box that plugs between the harness and the radio. Do a google search for factory ford radio camera. |
New member Username: Mpullia
Post Number: 1
Registered: Nov-06
|
| Posted on Saturday, November 18, 2006 - 09:26 pm: |
|
I just got a unit out of a mecury for my licolin mark lt . does the controls on the steering wheel work and how did your antena hook up also the map does not move with me so i will need a reprogram. do they do that in the car or do you have to send the unit out to them at arc. any help would be great
mike |
New member Username: Stangray
Post Number: 6
Registered: Aug-06
|
| Posted on Saturday, November 18, 2006 - 09:44 pm: |
|
Yes, my steering wheel controls work.
They make an antenna adapter. I got mine at Circuit City. It takes the one for Chrysler vehicles. Cost is approx $12.00.
The reason the map does not move is because the speed sensor information is on a different pin in your Lincoln than it was in the Mercury. Domonic at ARC can reprogram your radio to work.
He will need your truck year, if it has a DVD player, and if it has the audiophile option (sub)
He can also change the logo on startup from Mercury to Lincoln.
Stan |
New member Username: Mpullia
Post Number: 2
Registered: Nov-06
|
| Posted on Saturday, November 18, 2006 - 09:47 pm: |
|
stan thanks for the info can they program over the phone or ? Mike |
New member Username: Stangray
Post Number: 7
Registered: Aug-06
|
| Posted on Saturday, November 18, 2006 - 09:55 pm: |
|
Sorry i missed that part of your question.
No, you would have to mail them the unit, unless you live in the Boston area.
It takes about a week to get it back. |
New member Username: Beartrapper
Rural Hall,
NC
United States
Post Number: 1
Registered: Dec-06
|
| Posted on Monday, December 04, 2006 - 04:16 pm: |
|
Anyone know if a factory navigation system out of a 2005 expedition will fit a 2004 expedition. It was took out at the dealer & replaced with a eclipse. It is new, never been used.Can get it for about 400.00. No wireing or antenna. Can i get the wireing & antenna anywhere? |
Silver Member Username: Cadillacdb
Houston ,
TX
Post Number: 926
Registered: Aug-05
|
| Posted on Wednesday, December 06, 2006 - 04:17 am: |
|
i have a built in navigation too.. its my brain |
New member Username: Richards212
Post Number: 1
Registered: Dec-06
|
| Posted on Saturday, December 09, 2006 - 01:15 am: |
|
will that same unit work in my 05 explorer? It has the double din radio. |
New member Username: Mr_ford
Post Number: 1
Registered: Dec-06
|
| Posted on Saturday, December 09, 2006 - 07:06 pm: |
|
I have a 2006 mustang and I have installed a 2007 mountaineer nav radio. It was programed for me by ford dealer and everything is working fine however I have a speed error fault code U2473. The only issue I am having as a result of this code is that my position on the display is always 100 feet late. I have tried recalibrating position but it just returns shorthly to the late position. I have contacted dominic at ARC and he is looking into it. Does anyone have any cure or remedys that would help clear this code. |
New member Username: Cc1999
Post Number: 1
Registered: Feb-07
|
| Posted on Tuesday, February 27, 2007 - 06:19 pm: |
|
Has anyone ever tried puting the factory nav radio for the 2006 F150 in a 2006 F250. I know there size and shape is identical, and the mounting points are all that is different, so i am told anyway. I mainly concerned about the mounting points and will the steering wheel controls work. |
New member Username: 06vistabluegt
West jordan,
Utah
Usa
Post Number: 2
Registered: Nov-06
|
| Posted on Tuesday, April 10, 2007 - 12:38 pm: |
|
just purchased and installed a 2007 Ford Factory Navigation unit into my 2007 Ford F150 Pickup but i cant get the steering wheel controls to work everything else works but the volume control and the seek control and they said that it was programmed for steering wheel controls anyone know what might be up ?? |
New member Username: Stangray
Post Number: 8
Registered: Aug-06
|
| Posted on Tuesday, April 10, 2007 - 06:48 pm: |
|
Cindy,
The steering wheel controls is vehicle specific. I would guess that the radio you have came out of a vehicle that did not having steering wheel control.
It can be fixed, but it will require you to send it to Dominic to be re-programmed. |
New member Username: 06vistabluegt
West jordan,
Utah
Usa
Post Number: 3
Registered: Nov-06
|
| Posted on Tuesday, April 10, 2007 - 08:04 pm: |
|
Thank you |
New member Username: Witomskitom
Post Number: 1
Registered: May-07
|
| Posted on Friday, May 04, 2007 - 09:57 pm: |
|
hello everyone
I just purchased a 2006 ford navigation (from mercury) and installed into my 2007 f 150
-I dont know where I should install gps antena
( inside dash or on roof)
-i dont know where i can reprogramed this unit in chicago area ( change logo , set gps map, time, date)
-also i dont know where i can finded user manual for 2006 ford navigation
THANKS
TOM |
New member Username: 06vistabluegt
West jordan,
Utah
Usa
Post Number: 4
Registered: Nov-06
|
| Posted on Friday, May 04, 2007 - 10:25 pm: |
|
you put it inside the dash somewhere where it will clip on and not rattle
check on ebay for a manual |
New member Username: Lewpoberezny
Post Number: 1
Registered: May-07
|
| Posted on Wednesday, May 09, 2007 - 08:36 am: |
|
Call Chicago parts and sound. 630-350-1500 Ask for Ray. I paid 100.00 for reprogramming. I suggest you take vehicle with you. That is where I had mine done. |
New member Username: Schimshack
Post Number: 2
Registered: May-07
|
| Posted on Friday, May 11, 2007 - 08:03 pm: |
|
I bought a ford navagation radio out of a 2004 to put in my 2006 expedition but the plugs do not match is a harness avable for this. |
New member Username: Jayguy
Post Number: 1
Registered: Jun-07
|
| Posted on Tuesday, June 05, 2007 - 05:22 pm: |
|
I've got a co-worker who saw my factory nav in my '07 Mustang and he's wondering if it'll work in his '04 Ranger. Looks like a double-din unit will fit, the big question is programming and the connectors, will he need adapters? |
New member Username: Docm
Post Number: 1
Registered: Jun-07
|
| Posted on Friday, June 15, 2007 - 01:34 pm: |
|
Can a ford dealership reprogram a navigation unit or do I need to send it to someone like Dominic above. Also, the nav. system (2007 navigator) I bought didn't come with a disk. Will any of the new FLM disks work in it or does it have to be specific for my vehicle? Thanks |
New member Username: Jayguy
Post Number: 2
Registered: Jun-07
|
| Posted on Friday, June 15, 2007 - 02:05 pm: |
|
A Ford dealership SHOULD be able to re-program it. I'd call and ask their service department about it.
The nav disks are not vehicle specific, you can just buy the latest version and install it into your system. I don't know if there's a newer version out yet, the latest I have seen is 4P.
This is an example:
http://cgi.ebay.com/ebaymotors/Ford-Lincoln-Mercury-NAVTEQ-Navigation-DVD-NIP-RE L-4P_W0QQcmdZViewItemQQcategoryZ38653QQihZ016QQitemZ260127508017QQrdZ1QQsspagena meZWDVW |
New member Username: Esim1983
New Iberia,
Louisiana
U.S.
Post Number: 1
Registered: Jun-07
|
| Posted on Friday, June 29, 2007 - 03:48 am: |
|
Last week I purchased a 2007 Ford Navigation System for my F-150, it is a 2007 also. I connected everything to the back of it except for a pink connection that was on the unit, yet I had nothing to connect to it. Everything is working; steering wheel controls, Sirius sat radio, CD player, and radio. The only thing that is wrong is that my GPS is not working correctly. When I put in a POI my starting point is from Michigan. Could someone give me some advice please? I'm thinking that the pink connection on the back of the unit is for a GPS antenna, when I'm traveling the screen shows me roads that I have never scene before. The dealership that I bought the truck from told me that my truck is Navigation Ready, they say I shouldn't have to do anything. Also I can access the DVD player but can't put one in, what’s up with that? Also my Date/Time settings won't let me change them either. If the problem is an antenna where should I go about getting one? Any help is much appreciated!!! Thanks, Elliot |
New member Username: Stangray
Post Number: 9
Registered: Aug-06
|
| Posted on Friday, June 29, 2007 - 10:23 am: |
|
Elliot,
That connector is for a gps antenna. I purchased mine from a local Mercury dealer. I think I paid around $30.00. The antenna is very small. I wire tied mine to the cable loom, right under the pad in the middle of the dash.
If you are refering to the DVD player in the unit, that is for navigation only. If you are seeing maps on the screen, it sounds like there is one in there already.
Date and time settings come from the GPS. Install your antenna, and that will correct that problem. |
New member Username: Esim1983
New Iberia,
Louisiana
U.S.
Post Number: 4
Registered: Jun-07
|
| Posted on Friday, July 20, 2007 - 05:03 am: |
|
The person I bought my navigation system from says that it has Bluetooth capabilities but he or I do not know how to set it up. Does anyone know how to use this function? Thanks again, Elliot |
New member Username: Brettb
Kent City,
Michigan
Post Number: 1
Registered: Jul-07
|
| Posted on Sunday, July 22, 2007 - 11:00 pm: |
|
I recently bought a ford navigation system. And found that if I push the mute button twice that a hands free phone interface comes up. If I install the ford mobile-ease kit will this enable me to use this feature. As I currently am not able to do.
Thank you if anyone can help. |
New member Username: Wmckay
Fayetteville,
NC
US
Post Number: 7
Registered: Aug-07
|
| Posted on Friday, August 31, 2007 - 12:24 pm: |
|
First of all, the 2005 F150, coes not have MS-Can to communicate with your naviagation radio, so no matter what you do, It will not work on a 2005 F150, you can get them to work real good on the 2006, but not the 2005. If you want to sell the nav Radio, I'll take it off your hands. How to test your nav radio for compatibility -- with your can on and in park, press down on present 3 and 6 at the same time and you will access the software settings, also it will give you the codes and tell you this readi will not work in your truck. Fir more info wmckay@nc.rr.com |
New member Username: Stangray
Post Number: 10
Registered: Aug-06
|
| Posted on Friday, August 31, 2007 - 12:58 pm: |
|
William,
I am not sure who your comment is directed at, but since I have a 2005 F-150 I will respond.
I have a working Ford factory navigation system in my 2005 F-150. I do not know where your information is comming from, but I can assure you my system has been running great for 9 months.
Stan |
New member Username: Johnpw
Post Number: 1
Registered: Sep-07
|
| Posted on Tuesday, September 25, 2007 - 03:38 pm: |
|
Hello everyone,
I got my self a 2008 ford mustang with a factory installed navigation system and since I will be moving to Europe in a few months I have been trying to locate a "European Disc" compatible with my unit. Haven't done much yet, Ford tells me that they don't have a "European disc" and NAVTEQ hasn’t send me a response yet... |
New member Username: Jetmech7065
Seattle,
Wa
Usa
Post Number: 1
Registered: Oct-07
|
| Posted on Thursday, October 04, 2007 - 08:39 pm: |
|
Help I justt got a 2006 lincon nav system P/N 6H6T-18K931-AP (AVIC-1557ZFS3 /XHUC) for my 07 mustang. When I installed the NAV unit I got power could change radio stations and play cds but I cant turn up or down the volume but the valume indicator moves up and dwn on thee screen when I move the volume control I get sound but its to damm loud also I can't set the time/date and the gps don't show me in my state it shows me in MI on the American Road ?? any help would be great thanks } |
New member Username: Wmckay
Fayetteville,
NC
US
Post Number: 9
Registered: Aug-07
|
| Posted on Thursday, October 04, 2007 - 11:02 pm: |
|
Yes, I have, call me @ 910-864-0646 |
New member Username: Wmckay
Fayetteville,
NC
US
Post Number: 10
Registered: Aug-07
|
| Posted on Thursday, October 04, 2007 - 11:13 pm: |
|
It's a 2008 Nav Radio, there is a moudule you have tobuy from the ford dealer |
New member Username: Johnpw
Post Number: 2
Registered: Sep-07
|
| Posted on Friday, October 05, 2007 - 01:56 pm: |
|
Hi William, is you post a reply to my post or to Jonathan's post?
---John--- |
New member Username: Jb_brown
Post Number: 1
Registered: Dec-07
|
| Posted on Friday, December 14, 2007 - 04:36 pm: |
|
Have an 2007 Lincoln MKZ and want to install navigation from a 2006 Zepher. The screen is very scratched. Can screen be replaced, anyone know who could do this and approximate costs? |
New member Username: Jstrazz
Post Number: 1
Registered: Dec-07
|
| Posted on Sunday, December 23, 2007 - 07:00 pm: |
|
just saw this post and have a couple of questions. I picked up a factory nav. unit from an 07 expediton for my 07 f150 as a little present for myself. When I plug it in it will power up and display the ford symbol then shut down. do you guys think this could be a programing issue or is the radio doa . thanks guys Jay |
Bronze Member Username: Wmckay
Fayetteville,
NC
US
Post Number: 12
Registered: Aug-07
|
| Posted on Sunday, December 23, 2007 - 07:21 pm: |
|
Sir, You need a 7L3T-18K93, the radio you have is 7L1T, will not work because of the power on configiration. It much easier to get the right one. |
New member Username: Jstrazz
Post Number: 2
Registered: Dec-07
|
| Posted on Sunday, December 23, 2007 - 07:25 pm: |
|
that bites. thank you for the fast reply. is there any way of rewiring it to get it to work.if not it should work in my wifes 05 expedition. thanks again Jason |
New member Username: Jstrazz
Post Number: 4
Registered: Dec-07
|
| Posted on Monday, December 24, 2007 - 11:33 am: |
|
I just looked at the radio it's a 8L1T-18K93. can this be reprogramed to work. thanks guys Jay |
Bronze Member Username: Wmckay
Fayetteville,
NC
US
Post Number: 13
Registered: Aug-07
|
| Posted on Tuesday, December 25, 2007 - 12:46 pm: |
|
Sir, the radio has two 12 volt input, one is continous and the other comes on with the acc. In some F150's, there is a relay in the power line to the radio --- when the processor recognize that the radio is not the right one, the relay cuts the radio off. I sent a radio to the ford service center and had it reprogrammed for an F150 and it never worked. The F150 still has old technology. You need to get the one made for you vehicle and move on! If you want to sell yours, I'll take it off your hand. |
New member Username: Jstrazz
Post Number: 5
Registered: Dec-07
|
| Posted on Thursday, December 27, 2007 - 03:59 pm: |
|
I live not to far from ARC they took care of it. they reprogramed the radio and all works great. |
New member Username: Beartrapper
Rural Hall,
NC
United States
Post Number: 2
Registered: Dec-06
|
| Posted on Friday, December 28, 2007 - 12:28 pm: |
|
Does anyone know if you have to take the dash out of a 2004 expedition to install a factory navigation sysyem? |
Bronze Member Username: Wmckay
Fayetteville,
NC
US
Post Number: 14
Registered: Aug-07
|
| Posted on Friday, December 28, 2007 - 02:44 pm: |
|
No, just remove your radio. Then there is a special dash plate for the Nav Radio in a 2004 Expedition to make it fit. You must must get the plate from the Ford dealer or the Salvage Yard. |
New member Username: Beartrapper
Rural Hall,
NC
United States
Post Number: 3
Registered: Dec-06
|
| Posted on Saturday, December 29, 2007 - 02:39 pm: |
|
Thanks for the info William, but a don't think i can remove the radio because of the woodgrain dash kit that i installed. See no way of getting it out . Don't want to remove the dash. Guess i will stick with the Garmin 650 that i have. |
New member Username: Jamjr3
Post Number: 1
Registered: Oct-07
|
| Posted on Wednesday, January 02, 2008 - 06:27 pm: |
|
I also have an f-150 with the audiophile and have the same problem as jstrazz did, it turns on and then turns off right away. The number on my nav unit is 8F9T-18K931-FA. Any recommendations. I live near Chicago. |
New member Username: Lewpoberezny
Post Number: 2
Registered: May-07
|
| Posted on Thursday, January 03, 2008 - 08:06 am: |
|
Contact Ray @ Chicago Parts and Sound 630-350-1500 I pd 100.00 to have it programmed to work in a 2004 F150. I drove there from Milwaukee |
New member Username: Swfrx
Post Number: 1
Registered: Jan-08
|
| Posted on Tuesday, January 08, 2008 - 06:58 pm: |
|
I have a 2006 F-150. How can I find out which factory navigation units will work?
thanks |
New member Username: Jamjr3
Post Number: 2
Registered: Oct-07
|
| Posted on Thursday, January 10, 2008 - 05:27 pm: |
|
My truck is a job2 2007 f-150. Lew does the price include a gps antenna? |
New member Username: Ljjmiller
Post Number: 1
Registered: Jan-08
|
| Posted on Tuesday, January 15, 2008 - 09:35 am: |
|
We just received a unit we bought on Ebay for our 2007 Ford Edge. The model number matches the Edge's model exactly. The radio functions work fine and so do all of the buttons. However, the dvd will not open and when we try to load a cd into the changer, it says that it is full. So when we try to eject, it tries but nothing happens and it gives a cd error message. We hear it making the noises like it is trying to work. Any thoughts?
The seller sent us pictures of it with the dvd being loaded the day he mailed it so I am wondering if it was broken in transit or if we are doing something wrong.
One other question, there are three plugs in the back but we only have two from our previous unit (not including the gps antenna). Anyone know what the third plug is for? Are we missing something?
Any help is appreciated. |
New member Username: Ljjmiller
Post Number: 2
Registered: Jan-08
|
| Posted on Tuesday, January 15, 2008 - 09:54 am: |
|
Never mind. We found the third plug and that seems to have fixed the problem. |
New member Username: Rdt
Post Number: 1
Registered: Mar-08
|
| Posted on Saturday, March 01, 2008 - 05:32 pm: |
|
I just bought an 08 ford nav unit and installed it in my 07 f150. A couple of questions. The new nav has 3 jacks in back (not counting antenna and gps). What's the third one by the antenna? Also, my nav unit turns on for about 4 seconds and then just powers off. Thanks in advance.
Rich |
New member Username: Data174
Post Number: 1
Registered: Apr-08
|
| Posted on Saturday, April 05, 2008 - 01:27 pm: |
|
I just installed the ford navigation radio in my 2006 mustang gt.It was programed from the seller for the mustang.However gps and the map are not in sync. anybody having the same problem. |
Bronze Member Username: Stangray
Post Number: 11
Registered: Aug-06
|
| Posted on Saturday, April 05, 2008 - 02:17 pm: |
|
Al, Do you have the GPS antenna hooked up? If so, does your factory radio have the speed compensated volume? If not, that could be the problem. Even though your radio is programmed for a mustang, you may not be getting a speed sensor pulse from the car. |
New member Username: Data174
Post Number: 2
Registered: Apr-08
|
| Posted on Saturday, April 05, 2008 - 02:34 pm: |
|
Hi Stan
The gps antenna is hooked up and the radio removed was a shaher 500 system that had the speed compensated program.
The sellers is going to send me a new gps antenna. |
New member Username: Jayguy
Post Number: 3
Registered: Jun-07
|
| Posted on Monday, April 07, 2008 - 11:39 am: |
|
What exactly do you mean by "not in sync"?
There will be a difference of about 100ft or so because you don't have a good speed sensor signal to the GPS system. Unfortunately there is no guaranteed fix for this.
I know one person has been able to get it fixed by getting a newer gauge cluster (where the speed signal originates from). He got a cluster with a build date newer than Jan '07 and says his nav now works perfectly. Others have tried this and still get the error screen every time they start the car and go to the map that says there is a problem. If you look at the codes it should tell you it's a speed sensor error. Apparently there is no way to reprogram the nav system to fix this.
Read through this thread for more information on this problem.
http://forums.bradbarnett.net/showthread.php?t=450875&highlight=installing+facto ry+nav |
New member Username: Rdt
Post Number: 2
Registered: Mar-08
|
| Posted on Monday, April 07, 2008 - 07:46 pm: |
|
Al, I don't think your antenna is the problem. I had the same thing happen to mine. It's actually a common problem I found out on the F150's and mustangs. Drop me an email at rdtrinkle@heartofiowa.net and I'll help you troubleshoot it. |
New member Username: Paulisantangelo
Post Number: 1
Registered: Apr-08
|
| Posted on Sunday, April 20, 2008 - 09:14 pm: |
|
Hey All, Not sure if this is the right place to post this, but for the moment I can find no other place.
Does anyone know if the nav system in the 2008 ford escape is the Pioneer D1, or if it is a 2 piece unit?
I would like to add a backup camera to it, but I am finding conflicting information and I'd like to do this on the first shot.
Thanks
-paul |
New member Username: Data174
Post Number: 3
Registered: Apr-08
|
| Posted on Monday, April 21, 2008 - 07:12 pm: |
|
Paul
The factory nav radio is made by Pioneer for Ford. It is a one piece unit.I have seen adapters available on the net to install a back camera. |
New member Username: Paulisantangelo
Post Number: 2
Registered: Apr-08
|
| Posted on Monday, April 21, 2008 - 09:43 pm: |
|
Hi There:
Thanks for writing back, would you know the model number of the unit?
Thanks so much for the help! |
New member Username: Data174
Post Number: 4
Registered: Apr-08
|
| Posted on Tuesday, April 22, 2008 - 08:47 am: |
|
Hi Paul
Are you asking for the model number for the ford navigation unit ?
If you need the exact model number for your escape, call radios and more at 1-877-888-2225. Hope this helps.
Al |
New member Username: Jayguy
Post Number: 4
Registered: Jun-07
|
| Posted on Tuesday, April 22, 2008 - 11:53 am: |
|
Paul,
If you're wondering if the Ford nav unit is an exact duplicate of the commercial Pioneer models, they're not. I'm sure they're based on a model from Pioneer, but changed according to what Ford determined they wanted to offer, and of course the faceplate (dials, buttons, etc) is unique to Ford. |
New member Username: Paulisantangelo
Post Number: 3
Registered: Apr-08
|
| Posted on Tuesday, April 22, 2008 - 05:56 pm: |
|
I see a couple of you have figured out what I'm attempting.
I mean Since you have this great screen right there in the dash, why is there no back up camera?
So, I am attepting to figure out if I can put a camera on the system. So far I havn't had much luck in finding a way to do it. I think that I'll have to pull the radio out to see excatly what connections are on the back and just see what I can come up with as far as an interface. |
New member Username: Data174
Post Number: 5
Registered: Apr-08
|
| Posted on Tuesday, April 22, 2008 - 08:16 pm: |
|
Paul
If you get a chance go to web site tvandnav2go.com. The only problem is it requires secondary dvd player.
Al |
New member Username: Stech20
Post Number: 1
Registered: Jun-08
|
| Posted on Tuesday, June 03, 2008 - 11:02 pm: |
|
Hello, I have an 08' milan and was wondering if the silver '06 zeypher unit will work in it? Will I need to have it reprogrammed? |
Bronze Member Username: Wmckay
Fayetteville,
NC
US
Post Number: 15
Registered: Aug-07
|
| Posted on Wednesday, June 04, 2008 - 12:31 am: |
|
Hello Sir:
What is the Ford product number on the nav radio? |
New member Username: Stech20
Post Number: 2
Registered: Jun-08
|
| Posted on Wednesday, June 04, 2008 - 01:03 am: |
|
6h6t-18k931-aj, that is the number on top
thank you |
New member Username: Stech20
Post Number: 3
Registered: Jun-08
|
| Posted on Wednesday, June 04, 2008 - 10:21 am: |
|
Did I give the right number? |
New member Username: Jcamacho97
Post Number: 1
Registered: Jun-08
|
| Posted on Thursday, June 05, 2008 - 01:51 pm: |
|
No, just remove your radio. Then there is a special dash plate for the Nav Radio in a 2004 Expedition to make it fit. You must must get the plate from the Ford dealer or the Salvage Yard.
All you need is a new bezel because the Nav unit is about 1/2 inch bigger. |
New member Username: Data174
Post Number: 6
Registered: Apr-08
|
| Posted on Sunday, June 08, 2008 - 11:56 am: |
|
Wmckay
Hi William
Has their been any new progress on the configuration errors on the Navigation units.
Thanks Al |
New member Username: Gjackson
Post Number: 1
Registered: Sep-08
|
| Posted on Thursday, September 18, 2008 - 03:36 pm: |
|
I have a 2005 expedition with a cd based navigation system, the gps and radio work great, but i have lost the screen is there anyplace you can get another screen?
thanks
gjackson |
New member Username: Stech20
Post Number: 4
Registered: Jun-08
|
| Posted on Wednesday, October 01, 2008 - 01:22 am: |
|
Hello I asked a question months ago does the unit from an 06 zephyer 6h6t-18k931-aj work with a sirius connect? Can it work in a 08 milan? |
New member Username: Greenasp
Post Number: 2
Registered: Jan-09
|
| Posted on Sunday, January 11, 2009 - 03:00 pm: |
|
I pulled the factory Navigation from my wife's 2007 expedition and tried to put it in my 2008 f150. Everything seems to plug in ok, but I can not get power to the new unit. Any ideas? |
New member Username: Carl357
FORT WORTH,
TEXAS
USA
Post Number: 1
Registered: Apr-09
|
| Posted on Tuesday, April 28, 2009 - 09:43 pm: |
|
Will a 9L1T-18K931 work in my 2008 king ranch expedition? It came out of a E 350 van. |
New member Username: Peterfriesen
Richmond,
BC
Canada
Post Number: 1
Registered: Apr-09
|
| Posted on Thursday, April 30, 2009 - 01:30 am: |
|
Does anyone know if I can install a factory nav 7L1T-18K931-AF into a 2005 f 350 lariat? |
New member Username: Gnt81
Post Number: 2
Registered: Jun-09
|
| Posted on Wednesday, June 10, 2009 - 10:49 pm: |
|
Hello all,
I just installed a ford navi in my 2006 mountaineer all works great except that I would like the Mercury Logo on start up...I know that you can send out the unit to be programmed but does anyone have someone in NYC area that can reprogram the logo? I would like to not take the unit out of the car if possile. |
New member Username: Toddlyon
Post Number: 1
Registered: Aug-09
|
| Posted on Tuesday, August 04, 2009 - 02:21 pm: |
|
I am looking for a knob for the toggle switch on a 2006 ford escape navigation system. Any sugestions?
Thanks,
Todd |
New member Username: Mac202
Post Number: 1
Registered: Oct-09
|
| Posted on Wednesday, October 07, 2009 - 08:35 pm: |
|
i have 06 ford f150 with pioneer nav system thats been program but on my location the nav shows my position incorrectly by about 1/4 mile form the address.
can anyone help me
thanks |
