| Author |
Thread: Best Amp! |
    
Bob Harris Unregistered guest |
| Posted on Tuesday, June 14, 2005 - 05:38 pm: |
|
What would be the BEST amp for 2 JL 10 w0's??? Let me know ASAP! |
|
|
|
Bob Harris Unregistered guest |
| Posted on Tuesday, June 14, 2005 - 05:44 pm: |
|
http://www.jlaudio.com/subwoofers/10w0.html
thats the specs for the w0's |
Gold Member Username: Jonathan_f
GA
USA
Post Number: 4104
Registered: May-04
|
| Posted on Tuesday, June 14, 2005 - 05:48 pm: |
|
JL 250/1 is a good match for them. If you want to go a little higher end you could get something from Zapco, Arc Audio, McIntosh, and the like, but it costs mucho dinero. |
Connor Heming Unregistered guest |
| Posted on Tuesday, June 14, 2005 - 06:02 pm: |
|
What about for 2 JL 12w3v2's what would be best for them? Would a JBL bp600.1 work good? |
Bronze Member Username: Thrushdtd
New York
Post Number: 68
Registered: May-05
|
| Posted on Tuesday, June 14, 2005 - 06:31 pm: |
|
a jbl 600.1 would work good |
Bob Harris Unregistered guest |
| Posted on Tuesday, June 14, 2005 - 07:21 pm: |
|
Anything else that would be really good for the 2 JL 10w0's? |
Bob Harris Unregistered guest |
| Posted on Wednesday, June 15, 2005 - 12:24 pm: |
|
I want them to hit hard... any ideas on the amp? |
Silver Member Username: Alias747
MN
Post Number: 230
Registered: Apr-05
|
| Posted on Wednesday, June 15, 2005 - 01:02 pm: |
|
No a JBL 600.1 will not work good. It is way overpowering those subs. If you look at the power chart on JL's site, you will see that if you hook 300 wrms up to each of those subs your gonna be voiding your warranty. In other words, it's not a good idea. Go with the JL 250/1, it is a perfect match for those subs. It's always nice to have matching brand subs and amp too.  |
Bob Harris Unregistered guest |
| Posted on Wednesday, June 15, 2005 - 10:21 pm: |
|
anything that will still hit really hard and be reliable... but will cost a little less then the jl 250/1??? |
Bob Harris Unregistered guest |
| Posted on Wednesday, June 15, 2005 - 10:22 pm: |
|
anything that will still hit really hard and be reliable... but will cost a little less then the jl 250/1??? |
Gold Member Username: Jonathan_f
GA
USA
Post Number: 4111
Registered: May-04
|
| Posted on Wednesday, June 15, 2005 - 10:33 pm: |
|
What impedance are the subs? They come in different coil configurations. |
Bob Harris Unregistered guest |
| Posted on Thursday, June 16, 2005 - 12:03 pm: |
|
not sure..is there a way to tell.. or does it say it on the sub somewhere? |
Gold Member Username: Jonathan_f
GA
USA
Post Number: 4113
Registered: May-04
|
| Posted on Thursday, June 16, 2005 - 06:05 pm: |
|
Should say it on the sub or the receipt from wherever you bought it. |
Gold Member Username: James1115
Wilton,
Ct
Post Number: 3397
Registered: Dec-04
|
| Posted on Thursday, June 16, 2005 - 07:13 pm: |
|
it should say it on the magnet like 12w0d4 or 12w0d2 something like that. we cant recomend a good amp besides the 250/1 due to its regulated power supply because we dont know the config of the vc's |
Bob Harris Unregistered guest |
| Posted on Saturday, June 18, 2005 - 05:42 pm: |
|
k will check hold on.. |
|
| Posted on Tuesday, June 21, 2005 - 07:40 am: |
|
no the W0s do not have dual voice coils only single
An Alpine MRD-M300/M301 will power them hard and be reliable all day long, and is very crisp in SQ it's a quality amp |
|
| Posted on Tuesday, June 21, 2005 - 07:40 am: |
|
no the W0s do not have dual voice coils only single
An Alpine MRD-M300/M301 will power them hard and be reliable all day long, and is very crisp in SQ it's a quality amp |
