| Author |
Thread: Help with set up please |
    
JustinT Unregistered guest |
| Posted on Wednesday, March 30, 2005 - 02:04 pm: |
|
I have 2 Apline 12" 4 ohm Type R's wired in Parallel to a Alpine MRD-M500 amp, they are in a vented box inside a 2003 ford explorer sport. I was wanting to know if anyone could tell me what to put all these settings at to get the best performance out of it.
1. Low Pass Filter -- 30hz-200hz?
2 Subsonic Filter--15hz-50hz?
3.Parametric Eq-- What frequencey? width?
4.Phase? 0 degrees/180 degrees?
If you could help me out with these settings it would be much appreicated. Thanks |
|
|
|
Gold Member Username: Carguy
Post Number: 2137
Registered: Nov-04
|
| Posted on Wednesday, March 30, 2005 - 02:32 pm: |
|
1. Depending on your sub and type of music, 80Hz - 120Hz.
2. 18Hz - 20Hz, again depending on your sub.
3. Parametric equalizer is a bit harder to set. Unless you have excellent ears, a device such as RTA will help.
4. If you notice the bass lagging behind your front speakers, then set it to 180, if not 0 will do.
|
JustinT Unregistered guest |
| Posted on Wednesday, March 30, 2005 - 02:34 pm: |
|
subs are dvc |
JustinT Unregistered guest |
| Posted on Wednesday, March 30, 2005 - 02:36 pm: |
|
listen to rap/rock forgot to mention that |
Gold Member Username: Carguy
Post Number: 2139
Registered: Nov-04
|
| Posted on Wednesday, March 30, 2005 - 03:20 pm: |
|
1. around 100Hz to start and play with the control till you get the desired sound.
2. 25Hz
4. Start with 0, then 180 if you notice the lagging. |
|
