Home > Message Board > Car Audio > Amplifiers > Archive through March 27, 2005 > Wiring question
Main Topics Main Topics   Your Account Your Account Search Search   Help/Instructions Help
Today's Posts Today's Posts | Last 3 Days Bookmark and Share
Author Thread: Wiring question
Top of pagePrevious messageNext messageBottom of page Link to this message

Bronze Member
Username: Volfenhag1200

Post Number: 11
Registered: Mar-05
Edit Post

Alrite so heres what I wanna do. I wanna mount my amp on top of my sub box. This is gonna be easy but the only question I have is my ground wire. I know its not supposed to be any more than 3 ft from the amp. So would it be a good ground if I hooked it to the bottom of my seat or would that be bad. If you have any suggestions please let me know.
Top of pagePrevious messageNext messageBottom of page Link to this message

Silver Member
Username: Theelfkeeper

Stockbridge, GA
USA

Post Number: 147
Registered: Feb-05
Edit Post

its best to ground to the chassis, and most seat bolts contact the chassis (maks sure to sand away any paint on bolt and keep carpet out of the way) so they usually work. and most cars are unibody now, so bacially, where ever you can ground at is where you have to.
Top of pagePrevious messageNext messageBottom of page Link to this message

Silver Member
Username: Fishy

Tamarac Ft.Laud, FL
USA

Post Number: 756
Registered: Sep-04
Edit Post

Altho shorter/heavier runs of ground/power wire is always better, electrically there's really no difference between a "long" ground wire and a "long" power wire. Just keep your runs as short and as "thick" as you can. If you're worried about the length of your ground just use heavier gauge wire. Four feet of 4 gauge wire has about the same resistance as one foot of 10 gauge.

-Fishy
Topics | Last Day | Search | Formatting Tips | Terms | Rules | Help | Log out | Bookmark and Share
Home > Message Board > Car Audio > Amplifiers > Archive through March 27, 2005 > Wiring question [ « Previous ] [ Next » ]