| Author |
Thread: Purpose of crossovers that come with infinity kappa? |
    
New member Username: Kickerboy
Post Number: 1
Registered: 02-2004
|
| Posted on Sunday, February 22, 2004 - 06:10 pm: |
|
are the crossovers that come with infinty kappa series 6x9 and 6 1/2 adjustable??. and if they are not adjustable what is the purpose of them?
Infinity Kappa 63.5i
Infinity Kappa 692.5i |
|
|
|
|
| Posted on Sunday, February 22, 2004 - 08:31 pm: |
|
do you even know what crossovers are? |
New member Username: Kickerboy
Post Number: 2
Registered: 02-2004
|
| Posted on Sunday, February 22, 2004 - 09:10 pm: |
|
yeh i do
but i want to kno if the ones that come with those speakers are adjustable |
New member Username: Kickerboy
Post Number: 3
Registered: 02-2004
|
| Posted on Sunday, February 22, 2004 - 09:10 pm: |
|
cuz someone asked me if they were |
Bronze Member Username: Glasswolf
Post Number: 11
Registered: 02-2004
|
| Posted on Sunday, February 22, 2004 - 09:16 pm: |
|
I do not believe they are.
these crossovers are meant to split the frequencies between tweeters and midrange at the manufacturer's pre-determined points for the best power handling and flattest response.
If you want a high-pass filter for the midrange on the set, use the amplifier's crossover in addition.
|
david boker Unregistered guest |
| Posted on Sunday, February 22, 2004 - 09:19 pm: |
|
i have the 300/4 powering a set of components. is it ok to have the 24db set on the amp even though the comps already have crossovers? i have the JL audio vr components. |
New member Username: Kickerboy
Post Number: 4
Registered: 02-2004
|
| Posted on Monday, February 23, 2004 - 08:58 am: |
|
so would teh crossovers that they come with make them sound cleaner ?
would my setup sound better if i got a 3 way electronic crossover
i would be usin subz so there wont be any low frequency goin to them |
Bronze Member Username: Glasswolf
Post Number: 18
Registered: 02-2004
|
| Posted on Monday, February 23, 2004 - 11:30 am: |
|
david, yes use the high pass filter on the amp for the components. that'll block anything below, say, 80Hz from the midrage drivers.
kickerboy, just use the crossovers that came with the speakers. they came with the speakers for a reason. if you don't understand what crossovers are for don't monkey with them.
your amps should offer a high pass filter as well, which will work with the speakers' crossover modules, to block bass from the midrage.
|
New member Username: Kickerboy
Post Number: 5
Registered: 02-2004
|
| Posted on Monday, February 23, 2004 - 04:43 pm: |
|
thankz |
