| Author |
Thread: Mono amps?! |
    
Silver Member Username: Hiphopanonymous
Post Number: 173
Registered: Dec-03
|
| Posted on Tuesday, March 01, 2005 - 05:49 pm: |
|
I have a mono amp mtx 6500d. it has two out puts like
+- +- . Now do i bridge these two outputs? or do i just use one output for a sub? I have never had a mono amp before. Only been using 2 channel amps bridged. any help would be appreciated. |
|
|
|
Silver Member Username: Nnnnick_b
Nc
Usa
Post Number: 157
Registered: Jan-05
|
| Posted on Tuesday, March 01, 2005 - 05:58 pm: |
|
the reason there are 2 outputs (+ - , + -)
is for ease of use. U dont have to try and jam all the speaker wire into one hole. It is acctually just one output split into two. |
Bronze Member Username: Tdbdrummer
Post Number: 23
Registered: Feb-05
|
| Posted on Tuesday, March 01, 2005 - 07:01 pm: |
|
It turns the stereo signal into a mono signal! |
Bronze Member Username: Kojak28
Augusta,
GA
USA
Post Number: 35
Registered: Feb-05
|
| Posted on Tuesday, March 01, 2005 - 08:38 pm: |
|
On most mono block amps, the signal is converted internally to MONO. Nick is right-one speaker outlet---split into 2. |
Silver Member Username: Hiphopanonymous
Post Number: 175
Registered: Dec-03
|
| Posted on Tuesday, March 01, 2005 - 09:04 pm: |
|
ok cool. that makes sense. thanks. |
Bronze Member Username: Kojak28
Augusta,
GA
USA
Post Number: 39
Registered: Feb-05
|
| Posted on Tuesday, March 01, 2005 - 09:44 pm: |
|
How many subs you runnin? Just curious |
Silver Member Username: Hiphopanonymous
Post Number: 176
Registered: Dec-03
|
| Posted on Thursday, March 03, 2005 - 11:13 am: |
|
i'm runnin 3 10's that are all wired down to 4 ohms. i could wire it all to 1 ohm but the mtx only goes down to 2 ohm stable. |
|
