| Author |
Thread: How should I connect my subs? |
    
New member Username: Kobrakai
Melbourne
Australia
Post Number: 1
Registered: Jan-05
|
| Posted on Tuesday, January 11, 2005 - 09:04 pm: |
|
Hey guys, I'm new to this, and I was looking for a little help. I've got two 4 ohm Subs rated at 600W Max. 200W RMS, and I've got an amp, rated at 1x600W and 2x200W. Will this amp power the subs? And how is the best way to connect them? |
|
|
|
Bronze Member Username: Sparkey2027
Barnstaple,
England
England
Post Number: 26
Registered: Dec-04
|
| Posted on Wednesday, January 12, 2005 - 02:46 pm: |
|
what amp is it |
New member Username: Kobrakai
Melbourne
Australia
Post Number: 2
Registered: Jan-05
|
| Posted on Wednesday, January 12, 2005 - 10:31 pm: |
|
Its a Blaupunkt Velocity VR1002, heard of it?
The subs are the same brand, single coil. |
New member Username: Byrumjr
Post Number: 1
Registered: Jan-05
|
| Posted on Wednesday, January 12, 2005 - 10:44 pm: |
|
I am new also but will try to help you. I guess the 1x600W is bridged and that will be at 4 ohms. So both subs can’t be wired together. The best thing is to run each sub off each channel. |
|
