| Author |
Thread: Best amp for this sub? ( 15" kicker l5) |
    
Bronze Member Username: Pcgamer02
Post Number: 11
Registered: Oct-04
|
| Posted on Wednesday, November 03, 2004 - 05:20 pm: |
|
I'm gonna buy one of these babies off ebay today. Its refurbished by kicker, hopefully it will be good. I have a choice of 2ohm DVC or 4ohm DVC. Im leaning toward 2ohms so I can run a 1ohm load. What do you guys think would be the best Class D amp for this sub? Im not 100percent set on this particular sub, but I am set on a solo-baric seris sub. |
|
|
|
Bronze Member Username: Pcgamer02
Post Number: 12
Registered: Oct-04
|
| Posted on Wednesday, November 03, 2004 - 05:44 pm: |
|
Forgot to mention some of the amps I was thinking of
Kicker KX600 600 watts RMS x 1 at 2 ohms
Hifonics NX750D Nemesis Class-D Series
750W RMS x 1 at 1 ohms • 1 ohm stable monoblock
Sub can handle 750watts rms. |
Bronze Member Username: Djzavala
Whittier,
Ca
USA
Post Number: 76
Registered: Oct-04
|
| Posted on Wednesday, November 03, 2004 - 06:04 pm: |
|
I would go with the kicker amp because it just complimentz the sub you are getting. i also believe that amp gives you more pop in it. yo should go with the 2 ohm DVC, its just better, |
Bronze Member Username: Pcgamer02
Post Number: 13
Registered: Oct-04
|
| Posted on Wednesday, November 03, 2004 - 06:56 pm: |
|
If I get 1 2ohmDVC I can't wire for a 2ohm load. I would have to get a 4ohm DVC vr of the sub. |
New member Username: Jtw320
Saginaw,
MI
Post Number: 3
Registered: Nov-04
|
| Posted on Wednesday, November 03, 2004 - 09:57 pm: |
|
question related to this, if you had two subs both 2ohm DVC kickers can u then wire them to a 2ohm load? and would the JBL BP600.1 be a good amp for two 12-inch Kicker CVR's with Dual 2ohm Voice Coils? |
Bronze Member Username: Pcgamer02
Post Number: 14
Registered: Oct-04
|
| Posted on Wednesday, November 03, 2004 - 10:03 pm: |
|
Jason check out this,
http://www.rockfordfosgate.com/rftech/wiringwizard.asp |
|
