| Author |
Thread: NAD T770 & digital audio connection |
    
New member Username: Vinny186
Post Number: 7
Registered: Jan-08
|
| Posted on Monday, February 18, 2008 - 04:50 pm: |
|
I'm trying to connect the audio from my DVD player using digital coax to a T770 and although the NAD has a digital audio connection I don't understand how to get the receiver to the proper input in order to hear the audio from the DVD.
The receiver has four video inputs but they only seem to accept the red and white audio cables. However, in the back of the NAD at the far right, there is one optical and two digital audio inputs but it's not clear as to what input I need to set the receiver in order to get audio from the DVD.
 |
|
Relevant Product Info
|
|
Bronze Member Username: Jrbay
Livonia Detroit area,
Michigan
USA
Post Number: 32
Registered: Feb-08
|
| Posted on Monday, February 18, 2008 - 05:11 pm: |
|
On page 13 of your manual you will find the instructions that you need. Technically I am not supposed to copy it without permission but you can find it at:
http://207.228.230.231/manual/NAD-T770(EN).pdf
It basically says to
Select your input, press the Digital Audio Selector button until desired input is found. |
Bronze Member Username: Jrbay
Livonia Detroit area,
Michigan
USA
Post Number: 34
Registered: Feb-08
|
| Posted on Monday, February 18, 2008 - 05:17 pm: |
|
Sorry, the URL didn't transfer very well, I suppose you will need to copy and paste to your browser. |
New member Username: Vinny186
Post Number: 8
Registered: Jan-08
|
| Posted on Monday, February 18, 2008 - 05:58 pm: |
|
Thanks Jim. |
|
