| Author |
Thread: Sharp 26" LCD to OLD Receiver |
    
New member Username: Toastermaface333
Post Number: 1
Registered: Sep-07
|
| Posted on Wednesday, September 19, 2007 - 02:28 pm: |
|
hey there,
I am new to this site and i am in need of some help. I have a Sharp 26 inch LCD tv and i am having trouble connecting it to a Marantz 4270. I cant get the sound from anything (playstation 3, various other game consoles, and the VCR). I have audio cables that fit into both the TV and the reciever, but they just dont seem to work together. any suggestions? |
|
Relevant Product Info
|
|
Silver Member Username: Mccambley
BREEZY POINT,
NY
USA
Post Number: 408
Registered: Jun-05
|
| Posted on Wednesday, September 19, 2007 - 09:48 pm: |
|
Start here and come back if you still need help http://www.ceaconnectionsguide.com/ |
New member Username: Toastermaface333
Post Number: 2
Registered: Sep-07
|
| Posted on Wednesday, September 19, 2007 - 10:52 pm: |
|
that was nice, but it didnt have any suggestions. It also did no list all of the ports available on the TV. under the HDMI port is a "headphone jack" that headphones can plug into. there is also (next to the S video port) was a digital audio out port (coaxial output) |
Gold Member Username: John_s
Columbus,
Ohio
US
Post Number: 1813
Registered: Feb-04
|
| Posted on Thursday, September 20, 2007 - 08:18 am: |
|
Alex, you should have an analog stereo out on the TV. Connect these RCA R/L red/white outs to any high level input on the Marantz (anything except "Phono"). Then select that input on the receiver's front panel.
I can remember lusting after that Marantz back in the 70's.
Never had enough money for it though.
|
New member Username: Gbbailey
Post Number: 3
Registered: Oct-07
|
| Posted on Tuesday, October 16, 2007 - 08:25 pm: |
|
I could be wrong, but many of the LCD tvs do not have analog audio outputs. They just have digital outputs. They do have audio inputs. Check to see if the RCA jacks on the tv actually say output. If I remember correctly that is a stereo receiver so you only have two channels. Your gameboy, VCR, and other game consoles audio outputs should be plugged in to the receiver audio inputs to get the sound to the receiver speakers. The video outputs get plugged into the tv if you have enough video inputs on the tv. If not you can get a switch for the video cables. |
|
