| Author |
Thread: NAD T761 setup question |
    
New member Username: Jotunheim
Saint Cloud,
MN
United States
Post Number: 1
Registered: Oct-04
|
| Posted on Saturday, October 09, 2004 - 11:51 pm: |
|
Hi all.
I recently gave my receiver to my little brother after having intermittent problems with the left front channel and not having enough power, but am now having problems getting 5.1 to work on his system.
First, the NAD display is showing that it is receiving a 5.1 signal (it doesn't flash 'digital' and scrolls 'dolby digital') from the DVD player. I am using a coaxial digital cable from the digital out of the dvd player to the video 3 audio in on the NAD.
On the OSD for the NAD, I have all the speakers set on, but only have 3 speakers here to test (he's building his system), front and center, but still NO sound. What am I doing wrong?? Any ideas would be much appreciated.. Thanks!
Jason |
|
|
|
Bronze Member Username: Forcedinduction
Post Number: 30
Registered: Sep-04
|
| Posted on Saturday, October 23, 2004 - 02:11 am: |
|
You need to connect the coaxial digital cable to the coaxial digital input on the receiver, not the analog video 3 audio inputs... |
Bronze Member Username: Forcedinduction
Post Number: 31
Registered: Sep-04
|
| Posted on Saturday, October 23, 2004 - 02:16 am: |
|
http://207.228.230.231/manual/NAD-T761(EN).pdf
Page 4 has the proper place to hook it up. It is labeled "6" in the picture. |
|
