If you wish to share this new BEV fix I do not care, that is why I have it on public FTP ... To share.
 
If you wish to post this on your site for others to download, leave README in tact please.

[ Instructions ]

1: Open Included Jeepers.
2: go to file/Load Configuration, and load the latest_config.jfg file included into jeepers to load most of the settings.
3: Change Timezone if needed to match your area. (Its a US Zipcode, EX: Nova Scotia is 78155)
2: Select Blackout String
3: Input your IRD# (Get this info by pressing the system info button on the remote)
4: Input BoxKeys (This is a secret number from the receiver. You need a J-tag to read from the receiver, if you don't have    the boxkeys wrote down already)
5: Select Crystal Speed if not 18.0MHz and the proper network if needed.
6: Enter a valid CamID (generate a valid ROM 3 CAM ID with scammer2).
7: Hit Get For New Aux0 and Aux1 Keys.
8: Full Monty (may need to do it 2 times!)
9: Watch T.V :)


[ Notes ]

Note1: If your having programing problems check the lock/fuse bits. (refer to the "Lock Fuse settings for atmega128.txt" included)

Note2: If you cant get the latest keys when you hit get, change the URL for grabing the keys.
       Go into File/Preferences, you'll see GET KEYS URL and a Box below. Copy and paste        new KEy grabing URL in the Box.

       URL's to try: http://keys.sattech.ca/
                     http://www.dishgods.ca/keygrab.php
                     http://www.maestra.tv/keys/


Enjoy !