| Author |
Thread: Problems with Samsung |
    
New member Username: Znawaz
Post Number: 1
Registered: Nov-08
|
| Posted on Wednesday, November 26, 2008 - 09:08 pm: |
|
My samsung DLP 5067 does not turn on. Lamp light is flashing. I have change the lamp but problem still exist. Please help. |
|
|
|
New member Username: Tonylevario
Manor,
Tx
Post Number: 1
Registered: Jan-09
|
| Posted on Monday, January 05, 2009 - 04:41 pm: |
|
I have the same problem but I have a HL-P5663W DLP Model and I did not replaced my lamp bulb since I took it out and noticed it is still good. Also my fans are working properly as well. Wondering if the Power Supply board that the bulb connects to with the large Coils and transistors on the board is bad? I took it apart and noticed on the underside of the board it has a white'ish patern as if moisture is causing the sealent to un-glue or as if it wants to peal off from the board? Is this the problem? I need to get an ohm meter and check the components but can anyone answer us back to see what your input is please? Thanks.} |
Platinum Member Username: Basshead86
FTW
Post Number: 10261
Registered: Aug-05
|
| Posted on Tuesday, January 06, 2009 - 12:10 am: |
|
DLP's seem to have a lot of downsides with this friggin bulb.... |
Gold Member Username: Samijubal
Post Number: 4013
Registered: Jul-04
|
| Posted on Tuesday, January 06, 2009 - 03:28 pm: |
|
Samsuck+DLP=nightmare |
Platinum Member Username: Glasswolf
Wisteria,
Lane
USA
Post Number: 12184
Registered: Dec-03
|
| Posted on Tuesday, January 06, 2009 - 06:23 pm: |
|
From what I'd read, I was under the impression that Samsung's current generation of DLP sets use LED light sources now instead of a conventional bulb. I had briefly looked into a Samsung 65" DLP set, and there was note made of an LED bulb. |
Platinum Member Username: Basshead86
FTW
Post Number: 10278
Registered: Aug-05
|
| Posted on Wednesday, January 07, 2009 - 11:49 pm: |
|
i cant remember what brand of DLP a guy i work with owns. i will ask him ans see if he has had any similar problems. |
Silver Member Username: Ovadoggvo
Post Number: 219
Registered: May-07
|
| Posted on Monday, February 02, 2009 - 12:37 am: |
|
Guys,
Try this thread:
http://forum.ecoustics.com/bbs/messages/2/14343.html
I have hundreds of posts on diagnosing other peoples TV's. I am trying to keep everything in one thread in order to make it easier to manage and everyone can see your problems and any advice I can provide. If the problem and answer is not there, please post your problem and I will get to it. |
|
