| Author |
Thread: Sonicview 4000 Acting Strange |
    
Bronze Member Username: Toney
Antigua
Post Number: 56
Registered: Dec-05
|
| Posted on Wednesday, August 27, 2008 - 09:54 am: |
|
Hello Everyone,
I am presently experiencing this problem with my Sonicview 4000 Receiver. The problem that I am experiencing is I am getting NO Signal on my television screen. Whenever I do a blind scan on my receiver, I am seeing all the channels appearing and also my signal strength. When I exit out of the menu, I am getting No Signal appearing on my television screen. I hooked up, another receiver to the same cable coming from my dish, and I am getting picture and also signal strength. I change my LNB type to Universal and Single in thr Dish Setting Menu and it is not working. I flashed my receiver with the Factory bin then with SV4000_V0249P_Charlie_Fixed_081308.bin and it is still not working. My Setup is as follows:
1 12ft Solid Prime focus Dish
2 California Amplifier for Prime Focus Dish
3 Single Cable run from the LNB straight to the Receiver.
I would grateful if you can assist me in having my problem resolved. Thanks in advance. |
|
|
|
Gold Member Username: Tapeman
New York City in-HD,
NY
Post Number: 3293
Registered: Oct-06
|
| Posted on Wednesday, August 27, 2008 - 11:12 am: |
|
I don't have proof of this
But I'm suspecting newer ECMs designed to cause conflict especially when yo do blind scan
This is what I would do:
- Load newest bin
- Do factory default
- Do not do blind scan
- Do channel sat scan or TP scan
- Do and test one sat at a time
- Come back and tell me how this worked for yo |
Silver Member Username: Mucho
Post Number: 554
Registered: Dec-07
|
| Posted on Wednesday, August 27, 2008 - 12:54 pm: |
|
Andre Toney
1 12ft Solid Prime focus Dish
2 California Amplifier for Prime Focus Dish
With the equipment listed above what
satellite on C-band are you trying to scan in?
What make and type LNB are you using? |
Gold Member Username: Tapeman
New York City in-HD,
NY
Post Number: 3296
Registered: Oct-06
|
| Posted on Wednesday, August 27, 2008 - 01:25 pm: |
|
He's saying signal problem on ku band
Due to blind scan |
Bronze Member Username: Toney
Antigua
Post Number: 57
Registered: Dec-05
|
| Posted on Wednesday, August 27, 2008 - 01:55 pm: |
|
Hello Guys,
Thanks for your suggestions. I am on Echostar 3 (61.5) where I am experiencing this problem. I am living in the Southern most part of the Caribbean.
Toney. |
|
