| Author |
Thread: Pansat 2700 night rider lights |
    
Bronze Member Username: Lizwakefield
Post Number: 87
Registered: Dec-06
|
| Posted on Tuesday, August 26, 2008 - 04:28 pm: |
|
hi how can i fix the night rider light problem i have a converted flu to pansat
2500 or 2700 i am not 100% but it doesnt have the b75 bin installed
thanks
please help |
|
|
|
Gold Member Username: Prfrmnj
Post Number: 2869
Registered: Oct-05
|
| Posted on Tuesday, August 26, 2008 - 05:53 pm: |
|
You will need to do a forced boot flash! Basically follow this:
1. Power Down and disconnect STB.
2. Connect STB to your PC
3. Open BL Loader
4. Open Bin File to Load
5. Click Download to commence File Transer.
6. Immediately turn STB on from Rear
DO NOT interrupt the process until download is complete.
YOU WILL see a message at the end of the download saying "Burning". Do not be alarmed, this is normal.
Once the download is complete, your stb will reboot itself. Power down STB from rear and reconnect to your TV. |
Bronze Member Username: Lizwakefield
Post Number: 88
Registered: Dec-06
|
| Posted on Tuesday, August 26, 2008 - 06:33 pm: |
|
which loader do i use 1.4 or 2.72
and boot file 75 right? |
Gold Member Username: Prfrmnj
Post Number: 2872
Registered: Oct-05
|
| Posted on Tuesday, August 26, 2008 - 11:02 pm: |
|
The loader is going to depend on what files you have loaded in the past. But it should be 2.72 |
Platinum Member Username: Wingmanalive
A pic is worth
1000 posts!!
Post Number: 17938
Registered: Jun-06
|
| Posted on Tuesday, August 26, 2008 - 11:11 pm: |
|
PRFRMJ
Where the hell have you been?
Don't mind me. I'm an interested surfer. |
Gold Member Username: Prfrmnj
Post Number: 2873
Registered: Oct-05
|
| Posted on Tuesday, August 26, 2008 - 11:21 pm: |
|
Paul - I've been modding at FTA Bins. Decided to stop by to check out what was going on and posted here and there to help out. lol |
Bronze Member Username: Lizwakefield
Post Number: 89
Registered: Dec-06
|
| Posted on Wednesday, August 27, 2008 - 11:36 am: |
|
the thing is its not my receiver so id ont knwo waht was put there in there in the past  |
Silver Member Username: Justforhahas
Post Number: 170
Registered: Jul-08
|
| Posted on Wednesday, August 27, 2008 - 12:29 pm: |
|
Go into menu and system info and find out whats loaded in there now. |
Bronze Member Username: Lizwakefield
Post Number: 90
Registered: Dec-06
|
| Posted on Wednesday, August 27, 2008 - 01:56 pm: |
|
I CANT DO THAT CUZ THE LIGHT ARE FLASHING OVER ......
ALSO MY OTHER RECEIVER ALSO PANSAT 2700 JUST DIED AFTER I LOADED BIN286 FEW DAYS AGO ANYONE KNOW WAHTS THE PROBLEM THERE.....IT WAS WORKING AT FIRST AND THEN IT JUST STOPPED |
Gold Member Username: Prfrmnj
Post Number: 2874
Registered: Oct-05
|
| Posted on Wednesday, August 27, 2008 - 03:20 pm: |
|
Your gonna need to know if b75 was loaded on that receiver and then load then follow what I told you to do earlier. As far asthe one not working, sounds like you need to jtag it. This is because it may very well have been a clone and you loaded a file intended for an original and not clone. |
Bronze Member Username: Lizwakefield
Post Number: 91
Registered: Dec-06
|
| Posted on Wednesday, August 27, 2008 - 03:54 pm: |
|
i am pretty sure that b75 was not loaded on the receiver..i tried to load it but it didnt work..or maybe i had the wrong boot file waht do i do
thanks for ur help  |
Silver Member Username: El_birbano
Calle12,
Sonora
Xxx
Post Number: 170
Registered: Jun-08
|
| Posted on Wednesday, August 27, 2008 - 04:05 pm: |
|
Liz. Knight Rider (----) mean boot60
just load CanAm-Puff_253_640 K)
(load this bin when the KR are running)
wait untill you see PUFF
running on the led
That mean "converted to PUFF."
then load last bin 286 PUFF
when PUFF are running, (no turn off receiver
Do as PRFRMNJ said to download the files, but use BL 1.40 loader |
