| Author |
Thread: Which PUFF file is working for both Providers |
    
Silver Member Username: Dishlover
Toronto,
Ontario
Canad
Post Number: 233
Registered: Jun-06
|
| Posted on Sunday, August 24, 2008 - 03:36 pm: |
|
Please advise. Thanks |
|
|
|
Platinum Member Username: Nydas
Post Number: 11419
Registered: Jun-06
|
| Posted on Sunday, August 24, 2008 - 06:38 pm: |
|
286 is supposed to be working for both - Is there a problem? |
Bronze Member Username: Bluegillbill
Post Number: 70
Registered: Sep-06
|
| Posted on Sunday, August 24, 2008 - 11:13 pm: |
|
286 has freezing problems |
Bronze Member Username: Rockman169
Canada
Post Number: 44
Registered: Nov-06
|
| Posted on Monday, August 25, 2008 - 07:00 am: |
|
so is bev still not workimg right |
Silver Member Username: Dishlover
Toronto,
Ontario
Canad
Post Number: 234
Registered: Jun-06
|
| Posted on Monday, August 25, 2008 - 02:16 pm: |
|
BEV is not working with 286. |
Platinum Member Username: Nydas
Post Number: 11431
Registered: Jun-06
|
| Posted on Monday, August 25, 2008 - 07:51 pm: |
|
I do not have BEV but I have not read any reports of BEV not working on 286 BIN. |
Platinum Member Username: Nydas
Post Number: 11432
Registered: Jun-06
|
| Posted on Monday, August 25, 2008 - 07:53 pm: |
|
Tamara:
Look at this thread.
http://forum.ecoustics.com/bbs/messages/2/510220.html |
Silver Member Username: Dishlover
Toronto,
Ontario
Canad
Post Number: 235
Registered: Jun-06
|
| Posted on Monday, August 25, 2008 - 08:33 pm: |
|
Thanks Nalin I'll try that. You are always so helpful. |
Silver Member Username: Psychmonster
Rhodium Member
aint nuthin...
Post Number: 896
Registered: Jul-06
|
| Posted on Monday, August 25, 2008 - 11:17 pm: |
|
actually....283 went down for me today on Bev , loaded the 286 jvvh sw1 and got an initial channel but when you change channels it stays scrambled...so I just plugged in the Bev numbers manually and turned auturoll off and have tv...sometimes it takes a couple minutes to click in and virtually no epg but it works...somethine interesting there are several pids for bell 0905 , 0906 and 0907 that have not had keys changed for months...are these active and why are we not watching these when they are not changing the keys every 4 days |
Silver Member Username: Dishlover
Toronto,
Ontario
Canad
Post Number: 236
Registered: Jun-06
|
| Posted on Tuesday, August 26, 2008 - 09:03 am: |
|
Nalin the trick worked for me with 286. Thanks.
Psychmeter does changing keys manually do not show scambled on changing channels? |
Silver Member Username: Justforhahas
Post Number: 164
Registered: Jul-08
|
| Posted on Tuesday, August 26, 2008 - 09:25 am: |
|
Those other Bev PID keys 0905 (adult- Playb*oy), 0906 (HD), are used for adult and HD channels. The PID keys 0907 is a secondary main key. ALL the channels can be placed on secondary PID 0907, or main PID 0901. When the main 0901 keys go down then the other keys don't come into play. Just like a house, when the main breaker (0901) goes down, doesn't matter if the other breakers (0905, 06,) are on or off.
This also applies to DN and keys 0101 (main) and secondary DN keys 0106.
When DN and Bev use secondary keys 0106 and 0907 keys, we usually call that an ECM, but still need to keep the main keys (breaker) Bev 0901 or DN 0101 current, so when the secondary keys are resolved, we'll have a working active data stream again. |
Silver Member Username: Psychmonster
Rhodium Member
aint nuthin...
Post Number: 897
Registered: Jul-06
|
| Posted on Tuesday, August 26, 2008 - 12:10 pm: |
|
great post haha..
...Tamara I always remember some lag time when using the conversion boxes even when plugging the numbers in manually..slow processor of the boxes that use conversion bins do not help |
Silver Member Username: Psychmonster
Rhodium Member
aint nuthin...
Post Number: 898
Registered: Jul-06
|
| Posted on Tuesday, August 26, 2008 - 12:31 pm: |
|
one other thing with manually setting keys, especially with bev, they will change from all or just one key almost daily to p u off so its a chore...they just changed again today,,,so far the 286 puff sw 1 jvvh is autorolling... |
Silver Member Username: Dishlover
Toronto,
Ontario
Canad
Post Number: 237
Registered: Jun-06
|
| Posted on Tuesday, August 26, 2008 - 03:49 pm: |
|
Thanks Psychmonster |
Bronze Member Username: Moondog
Post Number: 12
Registered: Dec-06
|
| Posted on Wednesday, August 27, 2008 - 12:53 pm: |
|
Hi All
My pansat 2500 converted to PUFF. is not working.I dowloaded (fwank7_Jvvh-Team-PUFF_286_(Sw-21).bin) to it but now it doesnt wanna go past PUFF. PUFF.It keeps rolling PUFF.PUFF.
Do I have the right bin?
Thanks |
Silver Member Username: Dishlover
Toronto,
Ontario
Canad
Post Number: 238
Registered: Jun-06
|
| Posted on Thursday, August 28, 2008 - 01:46 pm: |
|
Try reloading it. |
Silver Member Username: Justforhahas
Post Number: 178
Registered: Jul-08
|
| Posted on Thursday, August 28, 2008 - 02:05 pm: |
|
"When DN and Bev use secondary keys 0106 and 0907 keys, we usually call that an ECM, but still need to keep the main keys (breaker) Bev 0901 or DN 0101 current, so when the secondary keys are resolved, we'll have a working active data stream again.", I posted above.
psychomonster..Actually we had a Bev 0907 key change yesterday and Bev stayed up, so apparantly the coders have sucessfully learned to create and release new fixes that autoroll these secondary 0106 and 0907 keys now, which is good news. I wanted to clarify this, as I noticed it yesterday with the 0907 change. |
