| Author |
Thread: Puff 283 |
    
Bronze Member Username: Felt
Post Number: 32
Registered: Dec-07
|
| Posted on Thursday, August 21, 2008 - 06:22 pm: |
|
try it no freeze here on 2500 converted |
|
|
|
Gold Member Username: Asharfi
Post Number: 2092
Registered: Aug-06
|
| Posted on Thursday, August 21, 2008 - 06:50 pm: |
|
I tried Bin v283 and still freezing on DN. Wait for new fixes ... |
Silver Member Username: Koko_wawa
Post Number: 345
Registered: Aug-07
|
| Posted on Thursday, August 21, 2008 - 07:19 pm: |
|
I confirm buff 283 works |
Silver Member Username: Koko_wawa
Post Number: 346
Registered: Aug-07
|
| Posted on Thursday, August 21, 2008 - 07:23 pm: |
|
It has been 20 min and no freezing with buff 283 v2 |
Silver Member Username: Koko_wawa
Post Number: 347
Registered: Aug-07
|
| Posted on Thursday, August 21, 2008 - 07:27 pm: |
|
scrambled channel after 23 min. need new fix, sory. |
Gold Member Username: Asharfi
Post Number: 2093
Registered: Aug-06
|
| Posted on Thursday, August 21, 2008 - 08:10 pm: |
|
It's PUFF not BUFF LOL |
Silver Member Username: Vittu
Post Number: 255
Registered: Oct-07
|
| Posted on Thursday, August 21, 2008 - 08:16 pm: |
|
so only Pansat and clones having issues?? |
Platinum Member Username: Nydas
Post Number: 11395
Registered: Jun-06
|
| Posted on Thursday, August 21, 2008 - 08:37 pm: |
|
Thanks - darren felt
PUFF 283 works with less glitches - tested on DN only.
PUFF_282 works but same amount of interruption as 285. I have not tried 284 |
Silver Member Username: Chicky3884
USA
Post Number: 206
Registered: Aug-07
|
| Posted on Thursday, August 21, 2008 - 08:42 pm: |
|
Hey I havent been her in a loooong time.what the heck is puff? |
Bronze Member Username: Locnoir
Post Number: 78
Registered: Aug-06
|
| Posted on Thursday, August 21, 2008 - 08:43 pm: |
|
Nalin, how about b75 bin? |
Platinum Member Username: Nydas
Post Number: 11397
Registered: Jun-06
|
| Posted on Thursday, August 21, 2008 - 08:47 pm: |
|
I have not tried b75-283 yet today. If you have b75 boot, why not try it.
If the ECM goes on, I might test the b75 boot 283 later |
Silver Member Username: Psychmonster
Rhodium Member
aint nuthin...
Post Number: 887
Registered: Jul-06
|
| Posted on Thursday, August 21, 2008 - 08:59 pm: |
|
have bev on pansat convert using 283 ..did a hard reboot and turned off autoroll and reset default...searched for 700% then went to "scrambled" and 2 minutes later came back on..then switched channels out of sequence and went down again ...but now with autoroll off and reboot and default reset...watching bev for 2 hrs no problems...good call darren felt...just have patience if you follow this protocal..when it says scrambled after searching for 700%...just leave it alone...it will kick in on the 283... |
Silver Member Username: Psychmonster
Rhodium Member
aint nuthin...
Post Number: 888
Registered: Jul-06
|
| Posted on Thursday, August 21, 2008 - 09:05 pm: |
|
watched 2 hrs..then scrambled...autoroll off ...just reset default and watch tv for a couple hrs until new bin but wait for search to end and then apprx 5 mins before tv kicks back in |
Platinum Member Username: Nydas
Post Number: 11399
Registered: Jun-06
|
| Posted on Thursday, August 21, 2008 - 09:09 pm: |
|
If you can't find PUFF_283 and B75_283 BINs, here are th elinks.
PUFF link
Alternative PUFF link
Alternative PUFF link
b75 Link
Alternative b75 Link
Alternative b75 Link |
Bronze Member Username: Locnoir
Post Number: 80
Registered: Aug-06
|
| Posted on Thursday, August 21, 2008 - 09:13 pm: |
|
Thanks Nalin! I'll try b75-283 |
Silver Member Username: Jkmago
Post Number: 223
Registered: Nov-07
|
| Posted on Thursday, August 21, 2008 - 09:44 pm: |
|
Can anyone confirm PUFF 283 working fine? |
Silver Member Username: Koko_wawa
Post Number: 348
Registered: Aug-07
|
| Posted on Thursday, August 21, 2008 - 09:56 pm: |
|
No, but you can watch TV for 20+ min then scrambled then good picture for 20+ min and so on |
Silver Member Username: Jaye50
Post Number: 125
Registered: Aug-07
|
| Posted on Thursday, August 21, 2008 - 10:46 pm: |
|
not working for me.....scrambles every 4 mins or so....comes back in about 2....then does it again.... |
New member Username: Nguyen_trina
Post Number: 8
Registered: Aug-07
|
| Posted on Friday, August 22, 2008 - 01:41 am: |
|
same, here.
What exactly Puff bin 283, we should use? fwank? Nikk? Ukr? These are posted by Nalin Nyda!
Do we have to scan after load bin 283?
Thanks guys! |
Bronze Member Username: Chow
Post Number: 93
Registered: Jan-08
|
| Posted on Friday, August 22, 2008 - 01:53 am: |
|
the new puff 286 is out at ftatalk works great for dn and bev. |
Silver Member Username: Metallica
Post Number: 881
Registered: Jan-08
|
| Posted on Friday, August 22, 2008 - 04:21 am: |
|
Trina this is the latest Puff 286 bin just came out..yes scan your SAT again after you load the new bin.
Ukr_Jvvh-Team-PUFF_286
http://www.ftabins.net/forumdisplay.php?f=128 |
Platinum Member Username: Nydas
Post Number: 11402
Registered: Jun-06
|
| Posted on Friday, August 22, 2008 - 10:15 pm: |
|
FLU/2500 Conversion to 2700 workalike.
Full kits for Latest conversion BINs and other files - also for Revert to 2500
PUFF link
Alternative PUFF link
b75 Link
Alternative b75 Link
Please read the instructions properly in the section you have chosen.
PLEASE DO NOT ATTEMPT WITHOUT READING INSTRUCTIONS. |
Bronze Member Username: Elvirm
Post Number: 57
Registered: Sep-07
|
| Posted on Friday, August 22, 2008 - 10:23 pm: |
|
Nalin, I tried klick on b75 link for new bin and ask me for passvord. Do you have new bin without that, please. I have FLU converted u Pansat (b75). |
Platinum Member Username: Nydas
Post Number: 11407
Registered: Jun-06
|
| Posted on Friday, August 22, 2008 - 10:40 pm: |
|
Alternative PUFF link
Alternative b75 Link |
Bronze Member Username: Jay_w_grayson
Prague,
Oklahoma
USA
Post Number: 27
Registered: Jul-08
|
| Posted on Saturday, August 23, 2008 - 06:17 am: |
|
To all Spammers there will be no more free advertisements
of any websites or any other spam.
Admin
Moderator
Username: Admin
I just removed the latest round of spam, and banned the user
 |
