| Author |
Thread: Something happened to my viewsat (noCH) |
    
Silver Member Username: Ariza
Post Number: 236
Registered: Feb-06
|
| Posted on Friday, March 21, 2008 - 09:27 pm: |
|
This is strange.. i was watching TV and all of a suddenly everything blacks out and the receiver says "noCH"
Even if i load the factory bin and the new file (march 11) it still says the same thing when i turn it on... |
|
|
|
Silver Member Username: Madflea168
Post Number: 360
Registered: Jan-08
|
| Posted on Friday, March 21, 2008 - 09:44 pm: |
|
you may just lose everything, need to re-scan.
or delete dn's key in the code menu like plymouth posted.
c/p
try it:
All viewsat box
Go to Code menu
Select Nagra and on Dish 01 06 00 Dish 00 01 00 dish 01 01 00
Delete this 3 provider one by one with F3 on remote
no need to delete keys
switch off 10 secs on back panel
and load last bin for your box
turn autoroll on
Keep on
Bin and autoroll regenerete keys
Resolve problem with lost channel , autoroll and search signal
Thats erase bad data in the box
For box who lost channel and sat setup
ENJOY TV
TESTED and work fine
New issue for problem on Viewsat
Thanks
Do a blind scan on your sat after for recover all channel
Because some new freq are provide
Dont do a factory reset and factory bin
No need it |
Silver Member Username: Ariza
Post Number: 237
Registered: Feb-06
|
| Posted on Friday, March 21, 2008 - 09:46 pm: |
|
na man i can't even control my remote control when i turn on the receiver... nothing works! |
Gold Member Username: Plymouth
Quebec city,
Quebec
Canada
Post Number: 1091
Registered: Jan-08
|
| Posted on Friday, March 21, 2008 - 10:13 pm: |
|
Try a hard reboot (switch off 10 secs on back panel) if remote not work reply |
Silver Member Username: Ariza
Post Number: 238
Registered: Feb-06
|
| Posted on Friday, March 21, 2008 - 10:23 pm: |
|
^ nope, still doesn't work.. you know where i could get the factory default file? |
Gold Member Username: Plymouth
Quebec city,
Quebec
Canada
Post Number: 1095
Registered: Jan-08
|
| Posted on Friday, March 21, 2008 - 10:31 pm: |
|
Yes
Which VS you have |
Silver Member Username: Ariza
Post Number: 239
Registered: Feb-06
|
| Posted on Friday, March 21, 2008 - 10:36 pm: |
|
Viewsat platinum...
btw im going to (1)load factory default file, (2) load latest factory file, (3) load latest bin and see what happens. |
Gold Member Username: Plymouth
Quebec city,
Quebec
Canada
Post Number: 1096
Registered: Jan-08
|
| Posted on Friday, March 21, 2008 - 10:54 pm: |
|
OK Jib go to viewsatusa.com/support
and download, unzip and install:
Loader 1 - Firmware Updater (Plat and Xtreme) and download :
VS2000 Platinum & Lite Factory Bin File - V0278 unzip it and load in receiver
do a hard reboot
load last bin for your box
Go to Code menu
Select Nagra and on Dish 01 06 00 Dish 00 01 00 dish 01 01 00
Delete this 3 provider one by one with F3 on remote
no need to delete keys
switch off 10 secs on back panel
and load last bin for your box
turn autoroll on
Keep on
Bin and autoroll regenerete keys
Resolve problem with lost channel , autoroll and search signal
Do a blind scan on your sat after for recover all channel
Because some new freq are provide
Now it supposed to work
Good luck |
Silver Member Username: Ariza
Post Number: 240
Registered: Feb-06
|
| Posted on Friday, March 21, 2008 - 11:17 pm: |
|
I'm an experienced FTA user, i know how to set up the receiver once its fixed. However, even when i do a hard reboot and load the latest factory file, it still gives me the same error message "noCH" and nothing works at all.. not the remote control nor the features on the receiver, such as CH or Volume.. it's frozen on a blue screen.. |
Gold Member Username: Plymouth
Quebec city,
Quebec
Canada
Post Number: 1098
Registered: Jan-08
|
| Posted on Friday, March 21, 2008 - 11:32 pm: |
|
Jib you load factory from viewsat or not?
If yes try unplug your box for 1 hour, that may reset function like remote and you supposed lost pass word if you have. |
Silver Member Username: Madflea168
Post Number: 362
Registered: Jan-08
|
| Posted on Friday, March 21, 2008 - 11:36 pm: |
|
if you did the fac reset and still no go, I guess you will have to do load the fac bin and default the box then load the latest bin is the last option.
good luck. |
Silver Member Username: Ariza
Post Number: 241
Registered: Feb-06
|
| Posted on Friday, March 21, 2008 - 11:36 pm: |
|
I loaded the factory file, then the latest fix, still no luck..
i'll load the latest fix again, and reboot after an hour |
Silver Member Username: Madflea168
Post Number: 363
Registered: Jan-08
|
| Posted on Friday, March 21, 2008 - 11:38 pm: |
|
default it? |
Gold Member Username: Plymouth
Quebec city,
Quebec
Canada
Post Number: 1099
Registered: Jan-08
|
| Posted on Friday, March 21, 2008 - 11:40 pm: |
|
Mad read remote dont work and button on receiver too |
Silver Member Username: Madflea168
Post Number: 365
Registered: Jan-08
|
| Posted on Friday, March 21, 2008 - 11:44 pm: |
|
does remote work after the fac bin loaded and before the latest bin? |
Silver Member Username: Ariza
Post Number: 242
Registered: Feb-06
|
| Posted on Friday, March 21, 2008 - 11:47 pm: |
|
Okay never mind.
I took it back upstairs and pressed the "menu" button. It's working.
After i do a blind scan, it should work. If it still doesn't work, i'll be sure to let you guys know.
Highly appreciate everyone's input and time.
Cheers! |
Gold Member Username: Plymouth
Quebec city,
Quebec
Canada
Post Number: 1100
Registered: Jan-08
|
| Posted on Friday, March 21, 2008 - 11:48 pm: |
|
Maybe you may try it to force factory bin:
When you laod factory bin before it is end switch off rear switch aand retry to load it |
Gold Member Username: Plymouth
Quebec city,
Quebec
Canada
Post Number: 1101
Registered: Jan-08
|
| Posted on Friday, March 21, 2008 - 11:49 pm: |
|
Good news Jib
If you need help just ask |
Silver Member Username: Ariza
Post Number: 244
Registered: Feb-06
|
| Posted on Saturday, March 22, 2008 - 12:13 am: |
|
thanks to plymouth and madflea, everythings cool.. back up as usual
have a good one guys! |
