| Author |
Thread: Problem with VSPRO & 121W |
    
Bronze Member Username: Kiranap
Post Number: 12
Registered: Jun-06
|
| Posted on Monday, March 03, 2008 - 11:56 am: |
|
I just loaded NEW GUI (VSPRO-080301A-II). Before loading, I did do Factory Default.
Most of the Internationals (All in My fav List) are now showing "Channel Moved". I was watching one just before I loaded NEW even that is moved.
My Setup -
VSPRO-080301A-II
Echostar 9 (121.0)
TP freq. - 11742
Any Suggestions? I have tried reverting back to OLD GUI. But now, I get same even with OLD.
One more, Everytime I try to setup Antenna Settings ... for Echostar 9 (121.0). TP Freq stays at 11742. I change it to 12132, I get Quality but it changes to 11742 on exit & I loose Q.
What am I doing wrong? |
|
|
|
Gold Member Username: Kirankumar
Kenya
Post Number: 1927
Registered: Oct-07
|
| Posted on Monday, March 03, 2008 - 11:58 am: |
|
can you post your full settings for all the satellites
like lnb type freq,switch
everything you see in antenna settings |
Bronze Member Username: Kiranap
Post Number: 13
Registered: Jun-06
|
| Posted on Monday, March 03, 2008 - 12:09 pm: |
|
VSPRO-080301A-II
Echostar 9 (121.0)
LNB Freq - 9750/10600
DiSEqC 1.0 - Port 2
DiSEqC 1.1 - None
Legacy SW - None
Motor Type - Disable
TP freq. - 11742
Echostar 8,10 (110.0)
LNB Freq - 11250 MHz
22Khz Tone - Off
DiSEqC 1.0 - Port 3
DiSEqC 1.1 - None
Legacy SW - None
Motor Type - Disable
TP freq. - 12224
Echostar 7 (119.0)
LNB Freq - 11250 MHz
22Khz Tone - Off
DiSEqC 1.0 - Port 1
DiSEqC 1.1 - None
Legacy SW - None
Motor Type - Disable
TP freq. - 12224 |
Gold Member Username: Kirankumar
Kenya
Post Number: 1929
Registered: Oct-07
|
| Posted on Monday, March 03, 2008 - 12:12 pm: |
|
for echostar 9 > change lnb freq to 11250,
and then transponder freq to 11457
post results |
Gold Member Username: Kirankumar
Kenya
Post Number: 1930
Registered: Oct-07
|
| Posted on Monday, March 03, 2008 - 12:13 pm: |
|
or try different tran freq once you set lnb to 11250 |
Bronze Member Username: Lookekhoshshans_1356
Tehran,
Tehran
Iran
Post Number: 96
Registered: Apr-07
|
| Posted on Monday, March 03, 2008 - 12:28 pm: |
|
http://forum.ecoustics.com/bbs/messages/2/456623.html |
Silver Member Username: Madflea168
Post Number: 302
Registered: Jan-08
|
| Posted on Monday, March 03, 2008 - 01:31 pm: |
|
the channels may moved from 121 to 118, you will need a dual 118/119 lnb or dn's repoint kit to capture the 118.
also, put 119 on port 1, 110 on port 2, 121 or future 118 on port 3.
for my vs, I had 10750 to work on 121 before and 118 now, 10600 did not work on me. |
|
